Once @hostname is printed into @hoststr we don't need it anymore.

==6879== 5 bytes in 1 blocks are definitely lost in loss record 10 of 1,064
==6879==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879==    by 0xA7ED599: strdup (in /lib64/libc-2.21.so)
==6879==    by 0x552C126: virStrdup (virstring.c:726)
==6879==    by 0x553B13E: virGetHostnameImpl (virutil.c:720)
==6879==    by 0x553B1BF: virGetHostnameQuiet (virutil.c:741)
==6879==    by 0x54FA3FD: virLogHostnameString (virlog.c:462)
==6879==    by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879==    by 0x54FA680: virLogMessage (virlog.c:531)
==6879==    by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879==    by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879==    by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The *event --loop commands would keep running even though a connection
to libvirtd is lost. This doesn't make a lot of sense since clearly we
won't get any new events from the closed connection.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virshCatchDisconnect expects ctl, but we were just passing NULL instead.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML.  Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start.  So let's forget about old generated paths
and also stop putting them into the persistent definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1278068Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When doing a memory-only snapshot libvirt would still issue the
'transaction' command without any disk. Skip it if it isn't necessary.

If no port number was provided for a storage pool libvirt defaults to
port 6789; however, librbd/librados already default to 6789 when no port
number is provided.

In the future Ceph will switch to a new port for the Ceph monitors since
port 6789 is already assigned to a different application by IANA.

Port 6789 is assigned to SMC-HTTPS and Ceph now has port 3300 assigned as
the 'Ceph monitor' port.

In this case it is the best solution to not hardcode any port number into
libvirt and let librados handle the connection.

Only if a user specifies a different port number we pass it down to librados,
otherwise we leave it blank.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

merge

It could happen that rbd_list() returns X names, but that while
refreshing the pool one of those RBD images is removed from Ceph
through a different route then libvirt.

We do not need to error out in such case, we can simply ignore the
volume and continue.

  error : volStorageBackendRBDRefreshVolInfo:289 :
    failed to open the RBD image 'vol-998': No such file or directory

It could also be that one or more Placement Groups (PGs) inside Ceph
are inactive due to a system failure.

If that happens it could be that some RBD images can not be refreshed
and a timeout will be raised by librados.

  error : volStorageBackendRBDRefreshVolInfo:289 :
    failed to open the RBD image 'vol-893': Connection timed out

Ignore the error and continue to refresh the rest of the pool's
contents.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

It could be that we error out while the RBD image has not been
opened yet. This would cause us to call rbd_close() on pointer
which has not been initialized.

Set it to NULL by default and only close if it is not NULL.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Currently pkg build of master branch fails:

[  300s] + /usr/lib/rpm/brp-boot-scripts
[  300s] E: File `virtlogd' is missing `Required-Start', please add even if empty!
[  300s] W: File `virtlogd' is missing `Required-Stop', please add even if empty!
[  300s] E: File `virtlogd' has empty `Default-Start', please specify default runlevel(s)!
[  300s] ERROR: found one or more broken init or boot scripts, please fix them.
[  300s]        For more information about LSB headers please read the manual
[  300s]        page of of insserv by executing the command `man 8 insserv'.
[  300s]        If you don't understand this, mailto=werner@suse.de
[  300s] error: Bad exit status from /var/tmp/rpm-tmp.44965 (%install)

Add the required tags, fix the existing tags.
Use soft dependency "Should-Start" because virtlogd may work without network.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>

The virtlogd initscript's lock file should go in /var/lock/subsys/, not
(the nonexistent) /var/log/subsys/.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit id 'aeb1078a' added a buildPool option and failure path which
calls virStoragePoolObjRemove, which unlocks the pool, clears the 'pool'
variable, and goto cleanup.  However, at cleanup virStoragePoolObjUnlock
is called without check if pool is non NULL.

The refactoring in commit a26669d7 silently ignored the dxml
parameter of virDomainMigrateToURI2.

https://bugzilla.redhat.com/show_bug.cgi?id=1295405

Commit id '70ffa02f' added the data.file.append option to some
VIR_DOMAIN_CHR_TYPE_FILE cases in switch statements allowing the
code to "fall through" for the remainder of the cases. This causes
angst in code profiling tools, like Coverity since there is no break;
followed by more case conditions. Adjust the logic to be more specific
within each case.
Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

For completeness, use the VIR_TRISTATE_SWITCH_ABSENT for data.file.append
comparisons. Commit ids '70ffa02f' and '53a15aed' just went with the non
zero comparison.

Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

Allow <name> and <uuid> anywhere under <domain>, not just at the top:

error:XML document failed to validate against schema: Unable to validate
doc against /usr/share/libvirt/schemas/domain.rng
Expecting an element name, got nothing
Invalid sequence in interleave
Element domain failed to validate content

Introduced with the first RelaxNG schema in commit c642103f.

https://bugzilla.redhat.com/show_bug.cgi?id=1292131

We have few code samples there that are almost unreadable when formatted
because they are not indented properly.  By indenting them they are
formatted as code and hence quite readable.  Also adjust descriptions to
be comments and add semicolons so that the code sample looks like sample
of a working code.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

While reviewing 1b43885d I've noticed a virReportError()
followed by a goto endjob; without setting the correct return
value. Problem is, if block job is so fast that it's bandwidth
does not fit into ulong, an error is reported. However, by that
time @ret is already set to 1 which means success. Since the
scenario can be hardly considered successful, we should return a
value meaning error.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Required for the copyright year bump to keep 'make syntax-check'
happy, and also pulls in several portability fixes.

* .gnulib: Update to latest.
* bootstrap: Resync from upstream.
* gnulib/local/m4/ssize_t.m4.diff: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

The documentation (and comment in libvirtd.conf) says that the text in
a log filter is compared to the "source file name", and gives the
example of "util/json", but this is not correct (at least not since
commit 2835c1e7, possibly earlier). It is instead compared to the
string given in the VIR_LOG_INIT() macro invocation at the top of each
source file, which is always "similar to but not the same as" the
source file name (in the example above, the proper name is
"util.json", while the file name is "util/virjson.c"). This patch
corrects the misstatement in both the documentation and in
libvirtd.conf.

Due to debug logs like this:

  virPCIGetDeviceAddressFromSysfsLink:2432 : Attempting to resolve device path from device link '/sys/class/net/eth1/device/virtfn6'
  logStrToLong_ui:2369 : Converted '0000:07:00.7' to unsigned int 0
  logStrToLong_ui:2369 : Converted '07:00.7' to unsigned int 7
  logStrToLong_ui:2369 : Converted '00.7' to unsigned int 0
  logStrToLong_ui:2369 : Converted '7' to unsigned int 7
  virPCIGetDeviceAddressFromSysfs:1947 : virPCIDeviceAddress 0000:07:00.7
  virPCIGetVirtualFunctions:2554 : Found virtual function 7

printed *once for each SR-IOV Virtual Function* of a Physical Function
each time libvirt retrieved the list of VFs (so if the system has 128
VFs, there would be 900 lines of log for each call), the debug logs on
any system with a large number of VFs was dominated by "information"
that was possibly useful for debugging when the code was being
written, but is now useless for debugging of any problem on a running
system, and only serves to obscure the real useful information. This
overkill has no place in production code, so this patch removes it.

The previous error message just indicated that the desired response
couldn't be found, this patch tells what was desired, as well as
listing out the entire table that had been in the netlink response, to
give some kind of idea why it failed.

I noticed in a log file that we had failed to set a MAC address. The
log said which interface we were trying to set, but didn't give the
offending MAC address, which could have been useful in determining the
source of the problem. This patch modifies all three places in the
code that set MAC addresses to report the failed MAC as well as
interface.

This used to return 'unkown' and that was not correct.

A vol-dumpxml now returns:

<volume type='network'>
  <name>image3</name>
  <key>libvirt/image3</key>
  <source>
  </source>
  <capacity unit='bytes'>10737418240</capacity>
  <allocation unit='bytes'>10737418240</allocation>
  <target>
    <path>libvirt/image3</path>
    <format type='raw'/>
  </target>
</volume>

The RBD driver will now error out if a different format than RAW
is provided when creating a volume.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Valgrind complained:

==28277== 38 bytes in 1 blocks are definitely lost in loss record 298 of 957
==28277==    at 0x4A06A2E: malloc (vg_replace_malloc.c:270)
==28277==    by 0x82D7F57: __vasprintf_chk (in /lib64/libc-2.12.so)
==28277==    by 0x52EF16A: virVasprintfInternal (stdio2.h:199)
==28277==    by 0x52EF25C: virAsprintfInternal (virstring.c:514)
==28277==    by 0x52B1FA9: virFileBuildPath (virfile.c:2831)
==28277==    by 0x19B1947C: storageDriverAutostart (storage_driver.c:191)
==28277==    by 0x19B196A7: storageStateAutoStart (storage_driver.c:307)
==28277==    by 0x538527E: virStateInitialize (libvirt.c:793)
==28277==    by 0x11D7CF: daemonRunStateInit (libvirtd.c:947)
==28277==    by 0x52F4694: virThreadHelper (virthread.c:206)
==28277==    by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==28277==    by 0x82BE93C: clone (in /lib64/libc-2.12.so)
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Valgrind complained:

==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 188 of 996
==18990==    at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990==    by 0x5292E9B: virAllocN (viralloc.c:191)
==18990==    by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990==    by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990==    by 0x222228CE: qemuMigrationPrepareAny (qemu_migration.c:3463)
==18990==    by 0x22224121: qemuMigrationPrepareDirect (qemu_migration.c:3865)
==18990==    by 0x22251C25: qemuDomainMigratePrepare3Params (qemu_driver.c:12414)
==18990==    by 0x5389EE0: virDomainMigratePrepare3Params (libvirt-domain.c:5107)
==18990==    by 0x1278DB: remoteDispatchDomainMigratePrepare3ParamsHelper (remote.c:5425)
==18990==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==18990==    by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==18990==
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 189 of 996
==18990==    at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990==    by 0x5292E9B: virAllocN (viralloc.c:191)
==18990==    by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990==    by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990==    by 0x222249D2: qemuMigrationRun (qemu_migration.c:4395)
==18990==    by 0x22226365: doNativeMigrate (qemu_migration.c:4693)
==18990==    by 0x22228E45: qemuMigrationPerform (qemu_migration.c:5553)
==18990==    by 0x2225144B: qemuDomainMigratePerform3Params (qemu_driver.c:12621)
==18990==    by 0x539F5D8: virDomainMigratePerform3Params (libvirt-domain.c:5206)
==18990==    by 0x127305: remoteDispatchDomainMigratePerform3ParamsHelper (remote.c:5557)
==18990==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)

If we're replacing the NBD data, it's simplest to free the old object
(including the disk list) and allocate a new one.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Valgrind complained:

==23975== Conditional jump or move depends on uninitialised value(s)
==23975==    at 0x22255FA6: qemuDomainGetBlockJobInfo (qemu_driver.c:16538)
==23975==    by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975==    by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975==    by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975==    by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975==    by 0x52F4668: virThreadHelper (virthread.c:206)
==23975==    by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975==    by 0x82BE93C: clone (in /lib64/libc-2.12.so)
==23975==
==23975== Conditional jump or move depends on uninitialised value(s)
==23975==    at 0x22255FB4: qemuDomainGetBlockJobInfo (qemu_driver.c:16542)
==23975==    by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975==    by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975==    by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975==    by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975==    by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975==    by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975==    by 0x52F4668: virThreadHelper (virthread.c:206)
==23975==    by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975==    by 0x82BE93C: clone (in /lib64/libc-2.12.so)

If no matching block job is found, qemuMonitorGetBlockJobInfo returns 0
and we should not write anything to the caller-supplied
virDomainBlockJobInfo pointer.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

While 'perl test-wrap-argv.pl' is not too long,
'./test-wrap-argv.pl' is shorter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So, after bec787ee we are building virt-login-shell
independent of LXC driver. This is nice, but the binary is
enabled by default which makes no sense on mingw. In fact, it
triggers some compilation errors there:

  CC       virt_login_shell-virt-login-shell.o
../../tools/virt-login-shell.c: In function 'main':
../../tools/virt-login-shell.c:289:15: error: implicit declaration of function 'sysconf' [-Werror=implicit-function-declaration]
     openmax = sysconf(_SC_OPEN_MAX);
               ^
../../tools/virt-login-shell.c:289:5: error: nested extern declaration of 'sysconf' [-Werror=nested-externs]
     openmax = sysconf(_SC_OPEN_MAX);
     ^
../../tools/virt-login-shell.c:289:23: error: '_SC_OPEN_MAX' undeclared (first use in this function)
     openmax = sysconf(_SC_OPEN_MAX);
                       ^
../../tools/virt-login-shell.c:289:23: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors

While we could workaround sysconf(_SC_OPEN_MAX) issue, the binary
itself makes no sense on systems where no LXC can be spawned.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is no functional change, but I find it disturbing that
something_LDADD contains PIE_LDFLAGS while something_LDFLAGS
doesn't.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So you have a libvirt volume that you want to wipe out. But lets
say that the volume is actually a file stored on a journaled
filesystem. Overwriting it with zeroes or a pattern does not mean
that corresponding physical location on the disk is overwritten
too, due to journaling. It's the same story with network based
volumes, copy-on-write filesystems, and so on. Since there is no
way that an userland application can write onto specific areas on
disk, all that we can do is document the fact.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case of prlsdkLoadDomains fails, vzOpenDefault should
clear connection privateData pointer every time its
memory is actually freed.
Also it is not necessary to call vzConnectClose if a call
to vzOpenDefault fails, because they both make cleanup of
connection privateData.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.
Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>