This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: NFrancesco Romani <fromani@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.

To accommodate that, a few changes are needed:

* enrich internal prototype to pass qemu driver object

* add per-group flag to mark if one collector needs monitor access or not

* If at least one collector of the requested stats needs monitor access
  we must start a query job for each domain.  The specific collectors
  will run nested monitor jobs inside that.

* If the job can't be acquired we pass flags to the collector so
  specific collectors that need monitor access can be skipped in order
  to gather as much data as is possible.
Signed-off-by: NFrancesco Romani <fromani@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

As of f05b6a91 the test produces the list of paths that can
be passed to <loader/> and libvirt knows about them. However,
during the process of generating the list the paths are checked
for their presence. This may produce different results on
different systems.  Therefore, the path - if missing - is
added to pretend it's there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This way it behaves more like the daemon itself does (acquiring a
pidfile, deleting the socket before binding, etc.).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=927369
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138604Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like

<loader ...>
  <value>/path/to/ovmf</value>
</loader>

We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

qemu for IBM Power processor architecture is adding functionality for
supporting multiple 'pseries' machine type versions, each with different
capabilities. This patch is for supporting the same
Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com>

As of 54289916 we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virStorageSourceInitChainElement initializes a new storage chain element
for use as a new disk source. If the new element doesn't contain the
driver name, copy it from the old source.

This fixes issue where a disk would forget the driver after a snapshot.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140984

Commit b606bbb4 broke reporting of errors when setting of guest time
fails via the guest agent as the return value is not checked and later
overwritten by the return value qemuMonitorRTCResetReinjection();

Fix this by checking the return value before resetting the RTC
reinjection.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142294

Pass the user-specified tun path down when creating tap device
when called from the qemu driver.

Also honor the vhost device path specified by user.

For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>

Use just one int variable for all the FromString calls.

Instead of checking upfront if the <driver> element will be needed
in a big condition, just format all the attributes into a string
and output the <driver> element if the string is not empty.

Prior to trying the query-iothreads call - check if the qemu has
the capability
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We already are checking for negative value, reporting an error, but
using wrong function and the check only succeeds when a value that
cannot be converted to number successfully is encountered. This patch
provides just a minor change in call of the right version
of function virStrToLong.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138539

The first one occurs in openvzDomainMigratePrepare3Params() where in
case no remote uri is given, the distant hostname is used. The name is
obtained via virGetHostname() which require callers to free the
returned value.
The second leak lies in openvzDomainMigratePerform3Params(). There's a
virCommand used later. However, at the beginning of the function
virCheckFlags() is called which returns. So the command created was
leaked.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, the setns() wrapper is supported only for x86_64 and i686
which leaves us failing to build on other platforms like arm, aarch64
and so on. This means, that the wrapper needs to be extended to those
platforms and make to fail on runtime not compile time.

The syscall numbers for other platforms was fetched using this
command:

kernel.git $ git grep "define.*__NR_setns" | grep -e arm -e powerpc -e s390
arch/arm/include/uapi/asm/unistd.h:#define __NR_setns                   (__NR_SYSCALL_BASE+375)
arch/arm64/include/asm/unistd32.h:#define __NR_setns 375
arch/powerpc/include/uapi/asm/unistd.h:#define __NR_setns               350
arch/s390/include/uapi/asm/unistd.h:#define __NR_setns          339
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The backing store string location offset 0 determines that the file
isn't present. The string size shouldn't be then checked:

from qemu.git/docs/specs/qcow2.txt

== Header ==

The first cluster of a qcow2 image contains the file header:

Byte  0 -  3:   magic
                QCOW magic string ("QFI\xfb")

      4 -  7:   version
                Version number (valid values are 2 and 3)

      8 - 15:   backing_file_offset
                Offset into the image file at which the backing file name
                is stored (NB: The string is not null terminated). 0 if the
                image doesn't have a backing file.

     16 - 19:   backing_file_size
                Length of the backing file name in bytes. Must not be
                longer than 1023 bytes. Undefined if the image doesn't have
                a backing file.         ^^^^^^^^^

This patch intentionally leaves the backing file string size check in
place in case a malformatted file would be presented to libvirt. Also
according to the docs the string size is maximum 1023 bytes, thus this
patch adds a check to verify that.

I was also able to verify that the check was done the same way in the
legacy qcow fromat (in qemu's code).

Found by inspection of the "i+1" change.  IOThreads are numbered 1..n
thus the virCgroupNewIOThread needs to create a 1..n value not 0 based.

Change "i+1" to "i + 1"

If there are no iothreads, then return from qemuProcessDetectIOThreadPIDs
without error; otherwise, the following occurs:

error: Failed to start domain $dom
error: An error occurred, but the cause is unknown

I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.

docs/ changes best viewed with -w

* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.
Signed-off-by: NEric Blake <eblake@redhat.com>

I missed adding virCgroupNewIOThread to the !VIR_CGROUP_SUPPORTED

Pushing as build breaker

This is a folloup to commit 5f719596, which checks for a route
conflicting with the standard libvirt default network subnet
(192.168.122.0/24). It turns out that $() strips the trailing newline
from the output of "ip route show", so there would be no match if the
route we were looking for was the final line of output. This can be
solved by adding ${nl} to the end of the output (just as we were
already adding it at the beginning of the output).

https://bugzilla.redhat.com/show_bug.cgi?id=1101574

Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.

The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.

Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.

This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.

In order to support cpuset setting, introduce qemuSetupCgroupIOThreadsPin
and qemuSetupCgroupForIOThreads to mimic the existing Vcpu API's.

These will support having an 'iotrhreadpin' element in the 'cpuset' in
order to pin named IOThreads to specific CPU's. The IOThread pin names
will follow the IOThread naming scheme starting at 1 (eg "iothread1")
up through an including the def->iothreads value.

Add new 'niothreadpids' and 'iothreadpids' to mimic the 'ncpupids' and
'vcpupids' that already exist.

Add virCgroupNewIOThread() to mimic virCgroupNewVcpu() except the naming
scheme with use "iothread" rather than "vcpu".

Generate infrastructure and test to handle fetching the QMP
IOThreads data.

Add an iothread parameter to allow attaching to an IOThread, such as:

virsh attach-disk $dom $source $target --live --config --iothread 2 \
     --targetbus virtio --driver qemu --subdriver raw  --type disk

Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When spanning tree protocol is allowed in bridge settings, forward delay
value is set as well (default is 0 if omitted). Until now, there was no
check for delay value validity. Delay makes sense only as a positive
numerical value.

Note: However, even if you provide positive  numerical value, brctl
utility only uses values from range <2,30>, so the number provided can
be modified (kernel most likely) to fall within this range.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1125764

%zu for size_t not %lu

Coverity complains that the comparison:

  if (nfds && nfds > ((int)!!sock_path + (int)!!sock_path_ro))

could mean 'sock_path' is NULL. Later in virNetSocketNewListenUNIX
there's a direct dereference of path in the error path:

  if (path[0] != '@')

A bit of sleuthing proves that upon entry to daemonSetupNetworking
there is no way for 'sock_path' to be NULL since daemonUnixSocketPaths
will set up 'sock_file' (although it may not set up 'sock_file_ro')
in all 3 paths.

Adjusted code to add ATTRIBUTE_NONNULL(3) on incoming path parameter and
then fixup the comparison of nfds to be a comparison against 2 or 1
depending on whether sock_path_ro is NULL or not.

Coverity complains about the calculation of the buf & len within
the PROBE macro.  So to quiet things down, do the calculation prior
to usage in either write() or qemuMonitorIOWriteWithFD() calls and
then have the PROBE use the calculated values - which works.