https://bugzilla.redhat.com/show_bug.cgi?id=1607202

It's essentially stated in the nwfilterBindingDelete that we
will allow the admin to shoot themselves in the foot by deleting
the nwfilter binding which then allows them to undefine the
nwfilter that is in use for the running guest...

However, by allowing this we cause a problem for libvirtd
restart reconnect processing which would then try to recreate
the missing binding attempting to use the deleted filter
resulting in an error and thus shutting the guest down.

So rather than keep adding virDomainConfNWFilterInstantiate
flags to "ignore" specific error conditions, modify the logic
to ignore, but VIR_WARN errors other than ignoreExists. This
will at least allow the guest to not shutdown for only nwfilter
binding errors that we can now perhaps recover from since we
have the binding create/delete capability.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

So, when trying to add some secret util sources, we referenced them with
a non-existent symbol.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Introduced in QEMU by commit v3.0.0-156-g8a11c62da9.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU commits:

    e37a5c7fa4 (v2.12.0)
        i386: Add Intel Processor Trace feature support

    c2f193b538 (v2.7.0)
        target-i386: Add support for UMIP and RDPID CPUID bits

    aff9e6e46a (v2.12.0)
        x86/cpu: Enable new SSE/AVX/AVX512 cpu features

    f77543772d (v2.9.0)
        x86: add AVX512_VPOPCNTDQ features

    5131dc433d (v3.1.0)
        i386: Add CPUID bit for PCONFIG

    59a80a19ca (v3.1.0)
        i386: Add CPUID bit for WBNOINVD
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When restoring a domain from a compressed image, we launch an
intermediate process for decompressing the saved data. If QEMU fails to
load the data for some reason, we force close the stdin/stdout file
descriptors of the intermediate process and wait for it to die. However,
virCommandWait can report various errors which would overwrite the real
error from QEMU. Thus instead of getting something useful:

    internal error: process exited while connecting to monitor:
    2018-09-17T15:17:29.998910Z qemu-system-x86_64: can't apply global
    Skylake-Client-x86_64-cpu.osxsave=off: Property '.osxsave' not found

we could get an irrelevant error message:

    internal error: Child process (lzop -dc --ignore-warn) unexpected
    fatal signal 13
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

In 2e974504 we've mistakenly removed gettext macro for
translating static strings. This results in table header being
printed in English regardless of user locale.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Lock all the paths we want to relabel to mutually exclude other
libvirt daemons.

The only hitch here is that directories can't be locked.
Therefore, when relabeling a directory do not lock it (this
happens only when setting up some domain private paths anyway,
e.g. huge pages directory).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So far the whole transaction handling is done
virSecuritySELinuxSetFileconHelper(). This needs to change for
the sake of security label remembering and locking. Otherwise we
would be locking a path when only appending it to transaction
list and not when actually relabelling it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Firstly, the following code pattern is harder to follow:

  if (func() < 0) {
      error();
  } else {
      /* success */
  }

We should put 'goto cleanup' into the error branch and move the
else branch one level up.
Secondly, 'rc' should really be named 'ret' because it holds
return value of the function. Not some intermediate value.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This label is used in both successful and error paths. Therefore
it should be named 'cleanup' and not 'err'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Lock all the paths we want to relabel to mutually exclude other
libvirt daemons.

The only hitch here is that directories can't be locked.
Therefore, when relabeling a directory do not lock it (this
happens only when setting up some domain private paths anyway,
e.g. huge pages directory).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Firstly, the message that says we're setting uid:gid shouldn't be
called from virSecurityDACSetOwnershipInternal() because
virSecurityDACRestoreFileLabelInternal() is calling it too.
Secondly, there are places between us reporting label restore and
us actually doing it where we can quit. Don't say we're doing
something until we are actually about to do it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So far the whole transaction handling is done
virSecurityDACSetOwnershipInternal(). This needs to change for
the sake of security label remembering and locking. Otherwise we
would be locking a path when only appending it to transaction
list and not when actually relabeling it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Two new APIs are added so that security driver can lock and
unlock paths it wishes to touch. These APIs are not for other
drivers to call but security drivers (DAC and SELinux). That is
the reason these APIs are not exposed through our
libvirt_private.syms file.

Three interesting things happen in this commit. The first is the
global @lockManagerMutex. Unfortunately, this has to exist so that
there is only one thread talking to virtlockd at a time. If there
were more threads and one of them closed the connection
prematurely, it would cause virtlockd killing libvirtd. Instead
of complicated code that would handle that, let's have a mutex
and keep the code simple.

The second interesting thing is keeping connection open between
lock and unlock API calls. This is achieved by duplicating client
FD and keeping it open until unlock is called. This trick is used
by regular disk content locking code when the FD is leaked to
qemu.

Finally, the third thing is polling implemented at client side.
Since virtlockd has only one thread that handles locking
requests, all it can do is either acquire lock or error out.
Therefore, the polling has to be implemented in client. The
polling is capped at 60 second timeout, which should be plenty
since the metadata lock is held only for a fraction of a second.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.

The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This config option allows users to set and enable lock manager
for domain metadata. The lock manager is going to be used by
security drivers to serialize each other when changing a file
ownership or changing the SELinux label. The only supported lock
manager is 'lockd' for now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

In some cases we might want to not load the lock driver config.
Alter virLockManagerPluginNew() and the lock drivers to cope with
this fact.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Soon there will be a virtlockd client that wants to either lock
all the resources or none (in order to avoid virtlockd killing
the client on connection close). Because on the RPC layer we can
only acquire one resource at a time, we have to perform a
rollback once we hit a resource that can't be acquired.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This is a new type of object that lock drivers can handle.
Currently, it is supported by lockd driver only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The fact whether domain has or doesn't have RW disks is specific
to VIR_LOCK_MANAGER_OBJECT_TYPE_DOMAIN and therefore should
reside in union specific to it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We will want virtlockd to lock files on behalf of libvirtd and
not qemu process, because it is libvirtd that needs an exclusive
access not qemu. This requires new lock context.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This flag causes virtlockd to use different offset when locking
the file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

From time to time it's handy to jump directly to a function prototype in
a header. However, generating tags for headers is disabled by default in
ctags, let's enable it by using --c-kinds=+p.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The directory has been renamed in 56299084, but a
reference to it was not updated at the same time, causing
'make dist' to fail ever since. Fix it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The file being present doesn't necessarily mean anything these
days, as it's created independently of whether the kvm module
has been loaded[1]; moreover, we're already gathering all the
information we need through QMP, so poking the filesystem at
all is entirely unnecessary.

[1] https://github.com/systemd/systemd/commit/d35d6249d5a7ed3228Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

This capability is documented as having one meaning (whether
KVM is enabled by default) but is actually assigned two other
meanings over its life: whether the query-kvm QMP command is
available at first, and later on whether KVM is usable / was
used during probing.

Since the query-kvm QMP command was available in 1.5.0, we
can avoid probing for it; additionally, we can simplify the
logic by setting the flag when it applies instead of initially
setting it and then clearing it when it doesn't.

The flag's description is also updated to reflect reality.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

A side effect of recent changes is that we would always try
to regenerate the capabilities cache for non-native QEMU
binaries based on /dev/kvm availability, which is of course
complete nonsense. Make sure that doesn't happen.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

It was already available in 1.5.0.

Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.

https://bugzilla.redhat.com/show_bug.cgi?id=1628469Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

More specifically, everything that's tested by qemucapabilities
now goes through qemucaps2xml as well.

Ideally we'll rewrite both so that listing all test cases is
unnecessary and they get picked up automatically by listing the
contents of the input directory instead, but that's a refactor
for another day :)
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

While qemucaps2xml has a meager two test cases to its name, we
have plenty of data from qemucapabilities which is taken from
actual QEMU binaries, covers pretty much all supported QEMU
versions and architectures and is even in the right format already!

Rewrite qemucaps2xml so that it uses qemucapabilities data as
input. Right now we have a single test case, but we're going to
add a lot more next.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

This patch add syntax-check rule for incorrect indentation and blank
first line in function body by changing check-spacing.pl.
For efficiency, it only checks the first line of function body.
But it's enough for most cases.
Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>