Yes, I like kilobytes better than kibibytes (when I say kilobytes,
I generally mean 1024).  But since the term is ambiguous, it can't
hurt to say what we mean, by using both the correct name and
calling out the numeric equivalent.

* src/libvirt.c (virDomainGetMaxMemory, virDomainSetMaxMemory)
(virDomainSetMemory, virDomainSetMemoryFlags)
(virNodeGetFreeMemory): Tweak wording.
* docs/formatdomain.html.in: Likewise.
* docs/formatstorage.html.in: Likewise.

The RPC code assumed that the array returned by the driver would be
fully populated; that is, ncpus on entry resulted in ncpus * return
value on exit.  However, while we don't support holes in the middle
of ncpus, we do want to permit the case of ncpus on entry being
longer than the array returned by the driver (that is, it should be
safe for the caller to pass ncpus=128 on entry, and the driver will
stop populating the array when it hits max_id).

Additionally, a successful return implies that the caller will then
use virTypedParamArrayClear on the entire array; for this to not
free uninitialized memory, the driver must ensure that all skipped
entries are explicitly zeroed (the RPC driver did this, but not
the qemu driver).

There are now three cases:
server 0.9.10 and client 0.9.10 or newer: No impact - there were no
hypervisor drivers that supported cpu stats

server 0.9.11 or newer and client 0.9.10: if the client calls with
ncpus beyond the max, then the rpc call will fail on the client side
and disconnect the client, but the server is no worse for the wear

server 0.9.11 or newer and client 0.9.11: the server can return a
truncated array and the client will do just fine

I reproduced the problem by using a host with 2 CPUs, and doing:
virsh cpu-stats $dom --start 1 --count 2

* daemon/remote.c (remoteDispatchDomainGetCPUStats): Allow driver
to omit tail of array.
* src/remote/remote_driver.c (remoteDomainGetCPUStats):
Accommodate driver that omits tail of array.
* src/libvirt.c (virDomainGetCPUStats): Document this.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Clear all
unpopulated entries.

Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise.  Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.

This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.

VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
                          be opened only if the hypervisor supports
                          mutually exclusive access to console devices

VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
                           existing session and force a creation of a
                           new one.

This API allows a domain which previously called
virDomainPMSuspendForDuration() to be woken up.

Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.

File changes:
 - src/util/viruri.h        -- declaration
 - src/util/viruri.c        -- definition
 - src/libvirt_private.syms -- symbol export
 - src/Makefile.am          -- added source and header files
 - cfg.mk                   -- added sc_prohibit_xmlURI
 - all others               -- ID name and include fixes

This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code.  The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.

Clarify the documentation of virConnectListDomains.

Bug introduced in commit c6ec021b.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

When libvirt's virDomainDestroy API is shutting down the qemu process,
it first sends SIGTERM, then waits for 1.6 seconds and, if it sees the
process still there, sends a SIGKILL.

There have been reports that this behavior can lead to data loss
because the guest running in qemu doesn't have time to flush its disk
cache buffers before it's unceremoniously whacked.

This patch maintains that default behavior, but provides a new flag
VIR_DOMAIN_DESTROY_GRACEFUL to alter the behavior. If this flag is set
in the call to virDomainDestroyFlags, SIGKILL will never be sent to
the qemu process; instead, if the timeout is reached and the qemu
process still exists, virDomainDestroy will return an error.

Once this patch is in, the recommended method for applications to call
virDomainDestroyFlags will be with VIR_DOMAIN_DESTROY_GRACEFUL
included. If that fails, then the application can decide if and when
to call virDomainDestroyFlags again without
VIR_DOMAIN_DESTROY_GRACEFUL (to force the issue with SIGKILL).

(Note that this does not address the issue of existing applications
that have not yet been modified to use VIR_DOMAIN_DESTROY_GRACEFUL.
That is a separate patch.)

compat{a->i}bility
erron{->e}ous
nec{c->}essary.
Either "the" or "a".
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Qemu is adding the ability to do a partial rebase.  That is, given:

base <- intermediate <- current

virDomainBlockPull will produce:

current

but qemu now has the ability to leave base in the chain, to produce:

base <- current

Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags.  But in the future, it may be possible to
enhance this API for additional scenarios by using flags:

Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.

Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.

* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.

This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.

* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
        - add function headers
        - add enum to select metadata to operate on
        - export functions
* src/libvirt.c
        - add public api implementation
* src/driver.h
        - add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
        - wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
        - add a new error message note that metadata for domain are
        missing

We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it.  This new API may be used for both.

which contained some useless lines, copied code, NULL
dereference.

Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible).  Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value.  So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.

* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.

Unlike other users of virTypedParameter with RPC, this interface
can return zero-filled entries because the interface assumes
2 dimensional array. We compress these entries out from the
server when generating the over-the-wire contents, then reconstitute
them in the client.
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/libvirt.c (virDomainPMSuspendForDuration): Clarify usage.

add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain.  The API is designed to allow
future extensions for additional statistics.

based on ideas by Lai Jiangshan and Eric Blake.

* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)
Signed-off-by: NEric Blake <eblake@redhat.com>

This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.

Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.

Expose the new command via 'virsh vol-resize'.
Signed-off-by: NEric Blake <eblake@redhat.com>

The old virRandom() API was not generating good random numbers.
Replace it with a new API virRandomBits which instead of being
told the upper limit, gets told the number of bits of randomness
required.

* src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits,
  and move virRandomInitialize
* src/util/util.h, src/util/util.c: Delete virRandom and
  virRandomInitialize
* src/libvirt.c, src/security/security_selinux.c,
  src/test/test_driver.c, src/util/iohelper.c: Update for
  changes from virRandom to virRandomBits
* src/storage/storage_backend_iscsi.c: Remove bogus call
  to virRandomInitialize & convert to virRandomBits

Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.

With this flag, virDomainSnapshotCreate will use fs-freeze and
fs-thaw guest agent commands to quiesce guest's disks.

Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers

Commit 5d784bd6 was a nice attempt to
clarify the semantics by requiring domain name from dxml to either match
original name or dname. However, setting dxml domain name to dname
doesn't really work since destination host needs to know the original
domain name to be able to use it in migration cookies. This patch
requires domain name in dxml to match the original domain name. The
change should be safe and backward compatible since migration would fail
just a bit later in the process.

The above option helps to differentiate between implicit and explicit
interface pools.

When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default.  But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.

https://bugzilla.redhat.com/show_bug.cgi?id=767104

* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.  Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.

We had loads of different styles in describing the @flags parameter
for various APIs, as well as several APIs that didn't list which
enums provided the bit values valid for the flags.

The end result is one of two formats:
@flags: bitwise-OR of vir...Flags
@flags: extra flags; not used yet, so callers should always pass 0

* src/libvirt.c: Use common sentences for flags.  Also,
(virDomainGetBlockIoTune): Mention virTypedParameterFlags.
(virConnectOpenAuth): Mention virConnectFlags.
(virDomainMigrate, virDomainMigrate2, virDomainMigrateToURI)
(virDomainMigrateToURI2): Mention virDomainMigrateFlags.
(virDomainMemoryPeek): Mention virDomainMemoryFlags.
(virStoragePoolBuild): Mention virStoragePoolBuildFlags.
(virStoragePoolDelete): Mention virStoragePoolDeleteFlags.
(virStreamNew): Mention virStreamFlags.
(virDomainOpenGraphics): Mention virDomainOpenGraphicsFlags.

I previously mentioned [1] a PolicyKit issue where libvirt would
proceed with authentication even though polkit-auth failed:

testusr xen134:~> virsh list --all
Attempting to obtain authorization for org.libvirt.unix.manage.
polkit-grant-helper: given auth type (8 -> yes) is bogus
Failed to obtain authorization for org.libvirt.unix.manage.
 Id Name                 State
----------------------------------
  0 Domain-0             running
  - sles11sp1-pv         shut off

AFAICT, libvirt attempts to obtain a privilege it already has,
causing polkit-auth to fail with above message.  Instead of calling
obtain and then checking auth, IMO the workflow should be for the
server to check auth first, and if that fails ask the client to
obtain it and check again.  This workflow also allows for checking
only successful exit of polkit-auth in virConnectAuthGainPolkit().

[1] https://www.redhat.com/archives/libvir-list/2011-December/msg00837.html

https://bugzilla.redhat.com/show_bug.cgi?id=770954

Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.

* src/libvirt.c: implement the main entry points

Set up the types for the numa functions and insert them into the
virDriver structure definition.

It's referring to virSuspendDomain instead of
virDomainSuspend.

* src/libvirt.c: Free user directory path

This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Drivers were inconsistent when presented both --live and --config
at once.  For example, within qemu, getting memory parameters
favored live, getting blkio tuning favored config, and getting
scheduler parameters errored out.  Also, some, but not all,
attempts to mix flags on query were filtered at the virsh level.
We shouldn't have to duplicate efforts in every client app, nor
in every driver.  So, it is simpler to just enforce that the two
flags cannot both be used at once on query operations, which has
precedent in libvirt.c, and which matches the documentation of
virDomainModificationImpact.

* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters)
(virDomainGetSchedulerParametersFlags, virDomainGetVcpuPinInfo):
Borrow sanity checking from virDomainGetVcpusFlags.

The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).

Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.