We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password

Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.

Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
  to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
  initial patch from Daniel:
    - ret = qemuInitGraphicsPasswords(driver, vm,
    -                                 VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
    -                                 &vm->def->graphics[0]->data.vnc.auth,
    -                                 driver->vncPassword);
    + ret = qemuInitGraphicsPasswords(driver, vm,
    +                                 VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
    +                                 &vm->def->graphics[0]->data.spice.auth,
    +                                 driver->spicePassword);

Based on patch by Daniel P. Berrange <berrange@redhat.com>.

I broke 'make check' with commit 04197350 by unconditionally
emitting 'hap=' in xen xm driver.  Only emit 'hap=' if
xendConfigVersion >= 3.  I've tested sending 'hap=' to a Xen 3.2
machine without support for hap setting and verified that xend
silently drops the unrecognized setting.

* src/conf/domain_conf.h (virDomainChrDeviceType): Drop monitor.
* src/conf/domain_conf.c (virDomainChrDevice)
(virDomainChrDefParseTargetXML, virDomainChrDefFormat): Drop
monitor support.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Alter signature.
* src/qemu/qemu_monitor.h (qemuMonitorOpen): Likewise.
* src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Change type of
monConfig.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateFree)
(qemuDomainObjPrivateXMLFormat, qemuDomainObjPrivateXMLParse):
Adjust to type change.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuPrepareMonitorChr)
(qemudStartVMDaemon, qemuDomainXMLToNative, qemuConnectMonitor)
(qemudShutdownVMDaemon): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpen): Likewise.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Likewise.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.

It was awkward having only int conversion in the virStrToLong family,
but only long conversion in the virXPath family.  Make both families
support both types.

* src/util/util.h (virStrToLong_l, virStrToLong_ul): New
prototypes.
* src/util/xml.h (virXPathInt, virXPathUInt): Likewise.
* src/util/util.c (virStrToLong_l, virStrToLong_ul): New
functions.
* src/util/xml.c (virXPathInt, virXPathUInt): Likewise.
* src/libvirt_private.syms (util.h, xml.h): Export them.

* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsProbeCPUModels, qemuCapsParsePCIDeviceStrs)
(qemuCapsExtractVersionInfo): Use virCommand rather than virExec.

xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging.  If disabled,
software techniques such as shadow page tables are used.  If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.

Xen does not provide a mechanism to discover the HAP capability, so
we advertise its availability for hvm guests on Xen >= 3.3.

xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging.  If disabled,
software techniques such as shadow page tables are used.  If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.

This provides implementation for mapping HAP setting to/from
domxml/native formats in xen drivers.

Extend the virDomainFeature enumeration to include HAP (hardware
assisted paging) feature.

Hardware features such as Extended Page Table and Nested Page
Table augment hypervisor software techniques such as shadow
page table.  Adding HAP to the virDomainFeature enumeration
allows users to select between hardware and software memory
management mechanisms for their guests.

Without this patch, at least tests/daemon-conf (which sticks
$builddir/src in the PATH) tries to execute the directory
$builddir/src/qemu rather than a real qemu binary.

* src/util/util.h (virFileExists): Adjust prototype.
(virFileIsExecutable): New prototype.
* src/util/util.c (virFindFileInPath): Reject non-executables and
directories.  Avoid huge stack allocation.
(virFileExists): Use lighter-weight syscall.
(virFileIsExecutable): New function.
* src/libvirt_private.syms (util.h): Export new function.

When we do peer2peer migration, the dest uri is an address of the
target host as seen from the source machine. So we must specify
the ip or hostname of target host in dest uri. If we do not specify
it, report an error to the user.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

If the emulator doesn't support SDL graphic, we should reject
the use of SDL graphic xml with error messages, but not ignore
it silently, and pretend things are fine.

"-sdl" flag was exposed explicitly by qemu since 0.10.0, more detail:
http://www.redhat.com/archives/libvir-list/2011-January/msg00442.html

And we already have capability flag "QEMUD_CMD_FLAG_0_10", which
could be used to prevent the patch affecting the older versions
of QEMU.

* src/qemu/qemu_command.c

Don't report an error when the VirtualBox registry key is missing,
as this just indicates that VirtualBox is not installed in general.

This matches the behavior of the XPCOM glue that silently ignores
a missing VBoxXPCOMC.so.

Skip IB700 when assigning PCI slots.

Note: the I6300ESB watchdog _is_ a PCI device.

To test this: I applied this patch to libvirt-0.8.3-2.fc14 (rebasing
it slightly: qemu_command.c didn't exist in that version) and
installed this on my machine, then tested that I could successfully
add an ib700 watchdog device to a guest, start the guest, and the
ib700 was available to the guest.  I also added an i6300esb (PCI)
watchdog to another guest, and verified that libvirt assigned a PCI
device to it, that the guest could be started, and that i6300esb was
present in the guest.

Note that if you previously had a domain with a ib700 watchdog, it
would have had an <address type='pci' .../> clause added to it in the
libvirt configuration.  This patch does not attempt to remove this.
You cannot start such a domain -- qemu gives an error if you try.
With this patch you are able to remove the bogus address element
without libvirt adding it back.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

* src/cpu/cpu_x86.c (x86ModelLoad): Free data before overwriting.

* src/conf/network_conf.c (virNetworkDefParseXML): Release ipNodes.

* src/util/network.c (virSocketAddrMask): Zero out port, so that
iptables can initialize just the netmask then call
virSocketFormatAddr without an uninitialized read in getnameinfo.

After the remote driver runs an event callback, it unconditionally disables the
loop timer, thinking it just flushed every queued event. This doesn't work
correctly though if an event is queued while a callback is running.

The events actually aren't being lost, it's just that the event loop didn't
think there was anything that needed to be dispatched. So all those 'lost
events' should actually get re-triggered if you manually kick the loop by
generating a new event (like creating a new guest).

The solution is to disable the dispatch timer _before_ we invoke any event
callbacks. Events queued while a callback is running will properly reenable the
timer.

More info at https://bugzilla.redhat.com/show_bug.cgi?id=624252

The current security driver usage requires horrible code like

    if (driver->securityDriver &&
        driver->securityDriver->domainSetSecurityHostdevLabel &&
        driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
                                                              vm, hostdev) < 0)

This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply

  if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
                                        vm, hostdev) < 0)

The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.

The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.

* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
  use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c,  src/qemu/qemu_security_dac.h
  src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
  Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
  src/security/security_dac.c, src/security/security_dac.h: Generic
  versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
  src/security/security_driver.c, src/security/security_driver.h,
  src/security/security_selinux.c, src/security/security_selinux.h:
  Update to take virSecurityManagerPtr object as the first param
  in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
  implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
  New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs

If invalid type is specified, e.g.
<serial type='foo'>
    <target port='0'/>
</serial>

We replace 'foo' with "null" type implicitly, without reporting an
error message to tell the user, and "start" or "edit" the domain
will be success.

It's not good to guess what the user wants, This patch is to fix
the problem.

* src/conf/domain_conf.c

This simplifies the callers of esxVI_LookupObjectContentByType.

Update test suite accordingly.

VirtualBox uses megabyte, libvirt uses kilobyte.

Add VM name/UUID in log for domain related APIs.
Format: "dom=%p, (VM: name=%s, uuid=%s), param0=%s, param1=%s

*src/libvirt.c (introduce two macros: VIR_DOMAIN_DEBUG, and
VIR_DOMAIN_DEBUG0)

I added a host definition to a network definition:

<network>
  <name>Lokal</name>
  <uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
  <bridge name='virbr1' stp='on' delay='0' />
  <ip address='192.168.180.1' netmask='255.255.255.0'>
    <dhcp>
      <range start='192.168.180.128' end='192.168.180.254' />
      <host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
    </dhcp>
  </ip>
</network>

But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.

The warning is bogus since strtok_r doesn't use the value when it's
first called and initializes it for the following calls.

When dynamic_ownership=0, saved images must be owned by the same uid
as is used to run the qemu process, otherwise restore won't work. To
accomplish this, qemuSecurityDACRestoreSavedStateLabel() needs to
simply return when it's called.

This fix is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=661720

Although the upper-layer code protected against it, it was possible to
call iptablesForwardMasquerade() with an IPv6 address and have it
attempt to add a rule to the MASQUERADE chain of ip6tables (which
doesn't exist).

This patch changes that function to check the protocol of the given
address, generate an error log if it's not IPv4 (AF_INET), and finally
hardcodes all the family parameters sent down to lower-level functions.

This is partially in response to

  https://bugzilla.redhat.com/show_bug.cgi?id=653300

The crash in that report was coincidentally fixed when we switched
from using inet_pton() to using virSocketParseAddr(), but the absence
of an ip address in a dhcp static host definition was still silently
ignored (and that entry discarded from the saved XML). This patch
turns that into a logged failure; likewise if the entry has neither a
mac address nor a name attribute (the entry is useless without at
least one of those, plus an ip address).

Since the network name is now pulled into this function in order for
those error logs to be more informative, the other error messages in
the function have also been changed to take advantage.

While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.

To reproduce this error, you could do the following:

dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))

and you should get an error like this:

error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success

Detected on cygwin:
util/util.c: In function 'virSetUIDGID':
util/util.c:2824: warning: format '%d' expects type 'int', but argument 7 has type 'gid_t' [-Wformat]
(and three other lines)

* src/util/util.c (virSetUIDGID): Cast, as is done elsewhere in
this file, to avoid printf type mismatch warnings.

Don't require non-null jobdata to virThreadPoolSendJob().

The udev driver does not update a PCI device with its SR-IOV capabilities,
when applicable, the way the hal driver does.  As a result, dumping the
device's XML will not include the relevant physical or virtual function
information.

With this patch, the XML is correct:

# virsh nodedev-dumpxml pci_0000_09_00_0
<device>
  <name>pci_0000_09_00_0</name>
  <parent>pci_0000_00_1c_0</parent>
  <driver>
    <name>vxge</name>
  </driver>
  <capability type='pci'>
    <domain>0</domain>
    <bus>9</bus>
    <slot>0</slot>
    <function>0</function>
    <product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
    <vendor id='0x17d5'>Neterion Inc.</vendor>
    <capability type='virt_functions'>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x2'/>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x3'/>
    </capability>
  </capability>
</device>

# virsh nodedev-dumpxml pci_0000_0a_00_1
<device>
  <name>pci_0000_0a_00_1</name>
  <parent>pci_0000_00_1c_0</parent>
  <driver>
    <name>vxge</name>
  </driver>
  <capability type='pci'>
    <domain>0</domain>
    <bus>10</bus>
    <slot>0</slot>
    <function>1</function>
    <product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
    <vendor id='0x17d5'>Neterion Inc.</vendor>
    <capability type='phys_function'>
      <address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
    </capability>
  </capability>
</device>

Cc: Dave Allan <dallan@redhat.com>
Signed-off-by: NChris Wright <chrisw@redhat.com>

As pointed out in https://bugzilla.redhat.com/show_bug.cgi?id=659855#c9,
commit c3568ec2 introduced a regression where we no longer close any
fd's beyond FD_SETSIZE.

* src/util/util.c (__virExec): Continue to close fd's beyond
keepfd range.
Reported by Stefan Praszalowicz.

The original version of these functions would modify the address sent
in, meaning that the caller would usually need to copy the address
first. This change makes the original a const, and puts the resulting
masked address into a new arg (which could point to the same
virSocketAddr as the original, if the caller really wants to modify
it).

This also makes the API consistent with virSocketAddrBroadcast[ByPrefix].