Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* Since the file pattern matches RNG schemas as well as C sources, the error message should mention both.

Commit 15c647a9 added the new
managedsave entries to all driver structs except the XenAPI one.

values. Rather use the strspn() function. Along with this cleanup the
initialization function for the code that used the regular expression
can also be removed.

An uninitialized int value was used to index an array. This can
result in a segfault in nwfilterxml2xmltest.

This command implements the managed save operation

* tools/virsh.c: new command
* tools/virsh.pod: documentation

The images are saved in /var/lib/libvirt/qemu/save/
and named $domainname.save . The directory is created appropriately
at daemon startup. When a domain is started while a saved image is
available, libvirt will try to load this saved image, and start the
domain as usual in case of failure. In any case the saved image is
discarded once the domain is created.

* src/qemu/qemu_conf.h: adds an extra save path to the driver config
* src/qemu/qemu_driver.c: implement the 3 new operations and handling
  of the image directory

* src/remote/remote_protocol.x src/remote/remote_protocol.h
  src/remote/remote_protocol.c src/remote/remote_driver.c: add the entry
  points in the remote driver
* daemon/remote.c daemon/remote_dispatch_args.h
  daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_table.h:
  and implement the daemon counterpart

virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points

git reset --hard 96e5a2d4
./autogen.sh
make -s
git pull
make -s    <-- expecting auto-bootstrap here, doesn't happen

Use git diff to expose whether the submodule has untracked changes,
which are typical on an incremental pull if .gnulib was updated but
the user did not manually run 'git submodule update'.

After this patch is applied, I encountered a new problem when
following the reproducing pattern.  Basically, the change to .gnulib
between libvirt's commit 96e5a2d4 and this patch introduced a change
to sys_ioctl.in.h, but gnulib (intentionally) does not make the
replacement headers depend on Makefile changes.  Therefore, I ended up
with the generated replacement header being broken:
gnulib/lib/sys/ioctl.h complained about a use of @.  But that seems
like something that should be fixed upstream in gnulib's bootstrap
script (that is, when doing a gnulib update, all files created from
.in.h file should probably be deleted).  Without the benefit of that
proposed gnulib fix, I worked around the problem by manually removing
the stale gnulib/lib/sys/ioctl.h.

* autogen.sh (t): Also run bootstrap if the gnulib submodule needs
to be updated.
* cfg.mk (_autogen): Likewise.
Reported by Matthias Bolte.

where possible.

This patch adds a couple of test cases for the XML parsing test suite covering various filterable protocols. For each test case an input XML and an output XML is provided checking the input XML after parsing and converting back into XML against the exepcted output XML.
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

- ebtables requires that some of the command line parameters are passed as hex numbers; so have those attributes call a function that prints 16 and 8 bit integers as hex nunbers.

- ip6tables requires '--icmpv6-type' rather than '--icmp-type'

- ebtables complains about protocol identifiers lower than 0x600, so already discard anything lower than 0x600 in the parser

- make the protocol entry types more readable using a #define for its entries

- continue parsing a filtering rule even if a faulty entry is encountered; return an error value at the end and let the caller decide what to do with the rule's object

- fix an error message

A lot of syntax check rules have to be rewritten, but the
result is easier to maintain.  I tested each syntax rule
by intentionally introducing a temporary violation of the rule.
Additionally, some false positives for unmarked_diagnostics
crept in, and an improved copyright_format test caught some bugs.

* .gnulib: Update to latest.
* cfg.mk (sc_prohibit_test_minus_ao): Delete, it was moved into
gnulib's maint.mk.
(sc_avoid_write, sc_prohibit_strcmp_and_strncmp)
(sc_prohibit_asprintf, sc_prohibit_strncpy, sc_prohibit_readlink)
(sc_prohibit_gethostname, sc_prohibit_gettext_noop)
(sc_prohibit_VIR_ERR_NO_MEMORY, sc_prohibit_nonreentrant)
(sc_prohibit_ctype_h, sc_TAB_in_indentation)
(sc_avoid_ctype_macros)
(sc_prohibit_virBufferAdd_with_string_literal)
(sc_prohibit_gethostby, sc_copyright_format): Rewrite in terms of
new maint.mk macros.
(sc_libvirt_unmarked_diagnostics): Fix whitespace.
* .x-sc_unmarked_diagnostics: New file.
* tests/object-locking.ml: Fix copyright.
* tools/virt-pki-validate.in: Likewise.
* tools/virt-xml-validate.in: Likewise.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):

1) 'wallclock' is changed to 'track', and the possible values are 'boot'
 (corresponds to old 'host'), 'guest', and 'wall'.

2) 'mode' has an additional value 'smpsafe'

3) when tickpolicy='catchup', there can be an optional sub-element of
   timer called 'catchup':

   <catchup threshold=123 slew=120 limit=10000/>

Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".

* docs/schemas/domain.rng: updated RNG definition to account for changes

* src/conf/domain_conf.h: change the C struct and enums to match changes.

* src/conf/domain_conf.c: timer parse and format functions changed to
                          handle the new selections and new element.

* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*

* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.

(suggested by Daniel Berrange, tested by Dan Kenigsberg)

virStorageFileGetMetadata will fail for disk images that are stored on
a root-squash NFS share that isn't world-readable.
SELinuxSetSecurityImageLabel is called during the startup of every
domain (as long as security_driver != "none"), and it will propogate
the error from virStorageFileGetMetadata, causing the domain startup
to fail. This is, however, a common scenario when qemu is run as a
non-root user and the disk image is stored on NFS.

Ignoring this failure (which doesn't matter in this case, since the
next thing done by SELinuxSetSecurityImageLabel - setting the file
context - will also fail (and that function already ignores failures
due to root-squash NFS) will allow us to continue bringing up the
domain. The result is that we don't need to disable the entire
security driver just because a domain's disk image is stored on
root-squashed NFS.

virFileReadLimFD is a poor fit for reading the header
of the restore file.  The problem is that virFileReadLimFD
returns an error when there is more data after the amount
you ask to read, but that is *expected* in this case.

This patch is essentially a revert of
1a4d5c95, but I don't think
that commit does what it says anyway.  It purports to prevent
an unwarranted OOM error, but since virFileReadLimFD will
allocate memory up to the maximum anyway, the upper limit
on the total amount of memory allocated is the same for either
the old version or the new version.  Since the old saferead
actually works and virFileReadLimFD does not, revert to
using saferead.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Received report of user crashing libvirtd with

virsh capabilities > capabilities.xml
virsh cpu-compare capabilities.xml

While user has been informed about proper usage of cpu-compare,
segfaulting libvirt should be avoided.

Do not parse CPU definition in virCPUDefParseXML() if XML is not
a 'cpu' node.

Adds $(AM_V_GEN) to many more manual makefile.am rules that
were generating files

When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:

  VIR_DOMAIN_EVENT_SUSPENDED

with a detail being one of:

  VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
  VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG

To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event

* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
  or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name

This also fixes a problem with MinGW's GCC on Windows. GCC complains
about the L modifier being unknown.

Parsing in pciIterDevices is stricter now and doesn't accept trailing
characters after the actual <domain>:<bus>:<slot>.<function> sequence
anymore.

Parsing in pciWaitForDeviceCleanup is also stricter now and expects
the <start>-<end> : <domain>:<bus>:<slot>.<function> sequence to be
terminated by \n.

Change domain from unsigned long long to unsigned int in
pciWaitForDeviceCleanup, because everywhere else domain is handled as
unsigned int too.

Parsing is stricter now and doesn't accept trailing characters
after the actual value anymore.

Parsing is stricter now and doesn't accept trailing characters
after the actual value anymore.

Also free 2k stack space.

This also fixes a bug in xenXMDomainConfigParse where uninitialized
memory would be used as MAC address if sscanf fails.

Parsing is stricter now and doesn't accept trailing characters
after the actual value or non-number strings anymore. atoi just
returns 0 in case it cannot parse a number from the given string.
Now an error is reported for such a string.

The switch from %lli to %lld in virCgroupGetValueI64 is intended,
as virCgroupGetValueU64 uses base 10 too, and virCgroupSetValueI64
uses %lld to format the number to string.

Parsing is stricter now and doesn't accept trailing characters
after the actual value anymore.

virParseVersionString uses virStrToLong_ui instead of sscanf.

This also fixes a bug in the UML driver, that always returned 0
as version number.

Introduce STRSKIP to check if a string has a certain prefix and
to skip this prefix.

Parsing is stricter now and doesn't accept trailing characters
after the actual value anymore.

Parsing is stricter now and doesn't accept trailing characters
after the actual <domain>:<bus>:<slot> sequence anymore.

found some cases where the output ended up not looking as expected. So
the following changes are in the patch below:

- if the protocol ID in the MAC header is an integer, just write it into
the datastructure without trying to find a corresponding string for it
and if none is found failing
- when writing the protocol ID as string, simply write it as integer if
no corresponding string can be found
- same changes for arpOpcode parsing and printing
- same changes for protocol ID in an IP packet
- DSCP value needs to be written into the data structure
- IP protocol version number is redundant at this level, so remove it
- parse the protocol ID found inside an IP packet not only as string but
also as uint8
- arrange the display of the src and destination masks to be shown after
the src and destination ip address respectively in the XML
- the existing libvirt IP address parser accepts for example '25' as an
IP address. I want this to be parsed as a CIDR type netmask. So try to
parse it as an integer first (CIDR netmask) and if that doesn't work as
a dotted IP address style netmask.
- instantiation of rules with MAC masks didn't work because they weren't
printed into a buffer, yet.

To fix an ESX test case, valid interface names need '/' as valid letter.
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>