- 21 3月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
It's just a combination of AddImplicitControllers, and AddConsoleCompat. Every caller that wants ImplicitControllers also wants the ConsoleCompat AFAICT, so lump them together. We also need it for future patches.
-
- 18 3月, 2016 2 次提交
-
-
由 John Ferlan 提交于
Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left the logic to save/restore the current error essentially doing nothing in the error path for qemuBuildCommandLine. So move it to where it was meant to be. Although the original code would reset the filter on command creation errors after building the network command portion and commit 'ef2ab8fd' altered that logic, the teardown is called during qemuProcessStop from virDomainConfVMNWFilterTeardown and that code has the save/restore last error logic, so just allow that code to handle the teardown rather than running it twice. The qemuProcessStop would be called in the failure path of qemuBuildCommandLine.
-
由 Michal Privoznik 提交于
We include the file in plenty of places. This is mostly due to historical reasons. The only place that needs something from the header file is storage_backend_fs which opens _PATH_MOUNTED. But it gets the file included indirectly via mntent.h. At no other place in our code we need _PATH_.*. Drop the include and configure check then. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 17 3月, 2016 1 次提交
-
-
由 Nikolay Shirokovskiy 提交于
Mostly it is just passing new parameter here and there. In case of zero value we fallback to auto selecting port and thus keep backward compatibility. Also we need to fix places of auto selected port managment. We should bother only when auto selected was done that is when externally specified port is not 0. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
- 16 3月, 2016 3 次提交
-
-
由 Martin Kletzander 提交于
In qemuConnectDomainXMLToNative() we set up the monitor, but we never memset() it to zeros. Thanks to the introduction of the logfile parameter of chardevs (and the logfile member of the struct), we started checking whether that's non-NULL and that exposed this old error. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Cole Robinson 提交于
These functions already report fine grained errors, there's no benefit to overwriting the error here.
-
由 Dmitry Andreev 提交于
Reverting to a snapshot may change domain configuration. New configuration should be saved if domain has persistent flag. VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT is emitted in case of configuration update.
-
- 15 3月, 2016 8 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the panic device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the NVRAM device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the RNG device options to the command line removing that task from the mainline qemuBuildCommandLine. Also modify the qemuBuildRNGDevStr to use const virDomainDef instead of virDomainDefPtr. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the memballoon device options to the command line removing that task from the mainline qemuBuildCommandLine. Also modify the qemuBuildMemballoonDevStr to use const virDomainDef instead of virDomainDefPtr. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the host device options to the command line removing that task from the mainline qemuBuildCommandLine. Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr, and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead of virDomainDefPtr. Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr static to the qemu_command.c. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the redirdev device options to the command line removing that task from the mainline qemuBuildCommandLine. Also move the qemuBuildRedirdevDevStr closer to the new function and modify to use the const virDomainDef instead of virDomainDefPtr Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the watchdog device options to the command line removing that task from the mainline qemuBuildCommandLine. Also since qemuBuildWatchdogDevStr was only local here, make it static as well as modifying the const virDomainDef. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the sound device options to the command line removing that task from the mainline qemuBuildCommandLine. Also since qemuBuildSoundDevStr was only local here, make it static as well as modifying the const virDomainDef. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 14 3月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
This function can be called over a domain definition that has no video configured. The tests/qemuxml2argvdata/qemuxml2argv-minimal.xml file could serve as an example. Problem is, before the check that domain has some or none video configured, def->videos is dereferenced causing a segmentation fault in case there's none video configured. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 12 3月, 2016 8 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the video device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the input device options to the command line removing that task from the mainline qemuBuildCommandLine. Make qemuBuildUSBInputDevStr static since only this module calls it. Also the change to use const virDomainDef forces other changes. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Modify the argument order and types to match other similar helpers. Also modify called functions to use the def->emulator instead of passing def->emulator and def. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the console device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the channel device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the parallels device options to the command line removing that task from the mainline qemuBuildCommandLine. Alter logic slight to reduce indention level. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the serial device options to the command line removing that task from the mainline qemuBuildCommandLine. Using const virDomainDef causes collateral damage in other called APIs which need to make the similar adjustment Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the smartcard device options to the command line removing that task from the mainline qemuBuildCommandLine. Alter the logic slightly to make !nsmartcards check first so that remainder of the code is less indented. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 11 3月, 2016 11 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the network device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -fsdev options to the command line removing that task from the mainline qemuBuildCommandLine. Alter the code slightly to perform the !caps and fsdev failure check up front. Since both qemuBuildFSStr and qemuBuildFSDevStr are local, make them static and fix their prototypes to use the const virDomainDef as well. Make some minor formatting changes for long lines. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the disk -drive options to the command line removing that task from the mainline qemuBuildCommandLine. Also since using const virDomainDef in new function, that means other functions called needed to change their usage. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the hub -device options to the command line removing that task from the mainline qemuBuildCommandLine. Also make qemuBuildHubDevStr static to the module since it's only used here. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the controller -device options to the command line removing that task from the mainline qemuBuildCommandLine. Also adjust to using const virDomainDef instead of virDomainDefPtr. This causes collateral damage in order to modify called APIs to use the const virDomainDef instead as well. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -global controller options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -boot options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the power management options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the '-clock' options to the command line removing that task from the mainline qemuBuildCommandLine. Also includes some minor formatting cleanups. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Marc-André Lureau 提交于
When debug-threads is enabled, individual threads are given a separate name (on Linux) Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1140121Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Marc-André Lureau 提交于
QEMU (somewhere around 2.0) added a new sub-option to the -name flag -name debug-threads=on. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 5 次提交
-
-
由 Daniel P. Berrange 提交于
Currently the file based character devices let QEMU write directly to a file on disk. This allows a malicious QEMU to inflict a denial of service by consuming all free space. Switch QEMU to use a pipe to virtlogd, which will enforce file rollover. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
If use of virtlogd is enabled, then use it for backing the character device log files too. This avoids the possibility of a guest denial of service by writing too much data to the log file.
-
由 Daniel P. Berrange 提交于
The functions for handling FD passing when building command line arguments need to be used by many different bits of code, so need to be at the start of the source file Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The act of formatting a chardev backend value may need to append command line arguments for passing FDs. If we append the -chardev arg before formatting the value, then the resulting arguments will end up interspersed Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Honour the <log file='...'/> element in chardevs to output data to a file. This requires QEMU >= 2.6 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-