Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.

This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.

To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955

Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Replace use of cpuMapOverride with virFileFindResource
to locate CPU map from build dir.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace virDriverModuleInitialize with virFileFindResource
usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace virLockManagerSetPluginDir with virFileFindResource
usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add calls to virFileActivateDirOverride so that the build dir
overrides are activated.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Fixes leak introduced by e562e82f

==4937== 64 bytes in 1 blocks are definitely lost in loss record 270 of 405
==4937==    at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==4937==    by 0x6FA41C4: __vasprintf_chk (vasprintf_chk.c:90)
==4937==    by 0x50C8D29: virVasprintfInternal (stdio2.h:199)
==4937==    by 0x50C8E3A: virAsprintfInternal (virstring.c:362)
==4937==    by 0x11D01A: main (libvirtd.c:1170)
Signed-off-by: NJán Tomko <jtomko@redhat.com>

A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.

The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=992980

This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.

When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.

The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.

https://bugzilla.redhat.com/show_bug.cgi?id=1074327Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself.  But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status.  This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.

* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

At this point it has a limited functionality and is highly
experimental. Supported domain operations are:

  * define
  * start
  * destroy
  * dumpxml
  * dominfo

It's only possible to have only one disk device and only one
network, which should be of type bridge.

https://bugzilla.redhat.com/show_bug.cgi?id=1033061

Currently, initialization of drivers is done in a separate thread. This
is done for several reasons: a driver that is initialized may require
running event loop, it may take ages to initialize driver (e.g. due to
autostarting domains). While the thread is spawn and run, the main()
continues its execution. However, if something goes bad, or the event
loop is just exited (e.g. due to a --timeout or SIGINT) we try to
cleanup all the drivers. So we have two threads running Initialize() and
Cleanup() concurrently. This may result in accessing stale pointers -
e.g. netcf driver will free() itself in stateCleanup callback, while the
init thread may come, open a dummy connection in order to autostart some
domains and voilà: do_open() iterates over interface drivers and
accesses stale netcf driver.

The fix consists in not running stateCleanup if the init thread is still
running.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A previous patch used existing #define for the various files in /etc/pki
instead of hardcoding them in the help output. However I missed that
remote_driver.h contains #define for more paths that are present
in the daemon help output.
This commit uses the existing constants for the path to the
configuration file and to the libvirt sockets.

There are constants for these paths in remote_driver.h so we can
use these rather than duplicating them in the help output.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The help message indicates that the CA certificate is
$sysconfdir/pki/CA/caert.pem while the actual path is
$sysconfdir/pki/CA/cacert.pem
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The virtlockd/libvirtd daemons had listed '?' as the short option
for --help. getopt_long uses '?' for any unknown option. We want
to be able to distinguish unknown options (which use EXIT_FAILURE)
from correct usage of help (which should use EXIT_SUCCESS). Thus
we should use 'h' as a short option for --help. Also add this to
the man page docs

The virtlockd/libvirtd daemons did not list any short option
for the --version arg. Add -V as a valid short option, since
-v is already used for --verbose.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:

  int listen(int sockfd, int backlog);

Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.

NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Detected by a simple Shell script:

for i in $(git ls-files -- '*.[ch]'); do
    awk 'BEGIN {
        fail=0
    }
    /# *include.*\.h/{
        match($0, /["<][^">]*[">]/)
        arr[substr($0, RSTART+1, RLENGTH-2)]++
    }
    END {
        for (key in arr) {
            if (arr[key] > 1) {
                fail=1
                printf("%d %s\n", arr[key], key)
            }
        }
        if (fail == 1)
            exit 1
    }' $i

    if test $? != 0; then
        echo "Duplicate header(s) in $i"
    fi
done;

A later patch will add the syntax-check to avoid duplicate
headers.

Add the infrastructure for the libvirt-lxc.la library to
the remote protocol client and daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add checks for existence of GNUTLS and automatically disable
it if not found.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>