- 10 7月, 2018 1 次提交
-
-
由 Peter Krempa 提交于
Add multiple drives with the various configurations rather than having multiple tests. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
These XMLs live in a separate directory, there's no need for them to have a special prefix in addition. It also doesn't play nicely with ':e' completion in Vim, finding proper file based on qemuxml2argvtest.c is also needlessly complicated. The files were renamed using the following commands. From qemuxml2argvdata: for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done and then (to fix broken symlinks) from qemuxml2argvdata and qemuxml2xmloutdata: for i in $(find . -xtype l); do \ ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i; done Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 27 1月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 23 6月, 2014 1 次提交
-
-
由 Laine Stump 提交于
There are no options to parse here other than the name of the device, and all three possible device names have the same prefix ("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the code is fairly simple. It has been implemented such that it will be easier to add handling for other -device entries that aren't otherwise recognized - just add another "else if (STRPREFIX(opts, ....)" clause. qemuParseCommandLineString() previously would always add a <memballoon model='virtio'/> to every result (the comments erroneously say that it is adding a <memballoon model='none'/>) This has been changed to add model='none', and 84 test case xml's updated accordingly (so that qemuxml2argvtest won't fail). Now that the memballoon device is properly parsed, we can safely add a test for properly ignoring -nodefconfig and -nodefaults. Rather than adding an entire new test case for this (and memballoon), we just randomly pick the clock-utc test and modify it slightly to fulfill the purpose.
-
- 25 4月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
- 10 2月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
-
- 07 10月, 2011 1 次提交
-
-
由 Laine Stump 提交于
Previously libvirt's disk device XML only had a single attribute, error_policy, to control both read and write error policy, but qemu has separate options for controlling read and write. In one case (enospc) a policy is allowed for write errors but not read errors. This patch adds a separate attribute that sets only the read error policy. If just error_policy is set, it will apply to both read and write error policy (previous behavior), but if the new rerror_policy attribute is set, it will override error_policy for read errors only. Possible values for rerror_policy are "stop", "report", and "ignore" ("report" is the qemu-controlled default for rerror_policy when error_policy isn't specified). For consistency, the value "report" has been added to the possible values for error_policy as well.
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Use it in all places where a memory or storage request size is converted to a larger granularity. This avoids requesting too small memory or storage sizes that could result from the truncation done by a simple division. This extends the round up fix in 6002e040 to the whole codebase. Instead of reporting errors for odd values in the VMX code round them up. Update the QEMU Argv tests accordingly as the original memory size 219200 isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change it to 219100 and 219136. Use two different values intentionally to make sure that rounding up works. Update virsh.pod accordingly, as rounding down and rejecting are replaced by rounding up.
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 09 4月, 2010 1 次提交
-
-
由 David Allan 提交于
* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace
-
- 27 3月, 2010 1 次提交
-
-
由 David Allan 提交于
* Fixes per feedback from Dan and Daniel * Added test datafiles * Re-disabled JSON flags * Added code to print the error policy attribute when generating XML * Re-add empty tag
-
- 18 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
- 31 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 7月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-