Signed-off-by: NStefan Schallenberg <infos@nafets.de>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: NStefan Schallenberg <infos@nafets.de>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The schema expects it to match the pattern

  v[0-9]+\.[0-9]+\.[0-9]+

which "5.0.0" clearly doesn't, causing the build to fail.
Reported-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

* docs/news.xml: updated for release
Signed-off-by: NDaniel Veillard <veillard@redhat.com>

Commits d7434ae8 and 9c4afbda added replies files for
QEMU 3.0.0 on s390x and QEMU 3.1.0 on x86_64 respectively, but
only enabled the corresponding test in qemucapabilities and not
in qemucaps2xml.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Since commit v4.3.0-336-gc84726fb all
{hypervisor-,}cpu-{baseline,compare} commands use a generic
vshExtractCPUDefXMLs helper for extracting individual CPU definitions
from the provided input file. The helper wraps the input file in a
<container> element so that several independent elements can be easily
parsed from the file. This works fine except when the file starts with
XML declaration (<?xml version="1.0" ... ?>) because the XML declaration
cannot be put inside any element. In fact it has to be at the very
beginning of the XML document without any preceding white space
characters. We can just simply skip the XML declaration.

https://bugzilla.redhat.com/show_bug.cgi?id=1592737Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Post-copy migration has been broken on the source since commit
v3.8.0-245-g32c29f10 which implemented support for
pause-before-switchover QEMU migration capability.

Even though the migration itself went well, the source did not really
know when it switched to the post-copy mode despite the messages logged
by MIGRATION event handler. As a result of this, the events emitted by
source libvirtd were not accurate and statistics of the completed
migration would cover only the pre-copy part of migration. Moreover, if
migration failed during the post-copy phase for some reason, the source
libvirtd would just happily resume the domain, which could lead to disk
corruption.

With the pause-before-switchover capability enabled, the order of events
emitted by QEMU changed:

                    pause-before-switchover
           disabled                        enabled
    MIGRATION, postcopy-active      STOP
    STOP                            MIGRATION, pre-switchover
                                    MIGRATION, postcopy-active

The STOP even handler checks the migration status (postcopy-active) and
sets the domain state accordingly. Which is sufficient when
pause-before-switchover is disabled, but once we enable it, the
migration status is still active when we get STOP from QEMU. Thus the
domain state set in the STOP handler has to be corrected once we are
notified that migration changed to postcopy-active.

This results in two SUSPENDED events to be emitted by the source
libvirtd during post-copy migration. The first one with
VIR_DOMAIN_EVENT_SUSPENDED_MIGRATED detail, while the second one reports
the corrected VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY detail. This is
inevitable because we don't know whether migration will eventually
switch to post-copy at the time we emit the first event.

https://bugzilla.redhat.com/show_bug.cgi?id=1647365Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These are based on QEMU v3.1.0-rc2-41-g4822f1ee9e.
Acked-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Get rid of trailing spaces which can be found after last column in tables.
Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Both VIR_DOMAIN_FEATURE_HPT and VIR_DOMAIN_FEATURE_HTM are
handled in the exact same way, so we can remove some duplicated
code without losing any functionality.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adding the interface in qemu to report CMT statistic information
through command 'virsh domstats --cpu-total'.

Below is a typical output:

         # virsh domstats 1 --cpu-total
         Domain: 'ubuntu16.04-base'
           ...
           cpu.cache.monitor.count=2
           cpu.cache.monitor.0.name=vcpus_1
           cpu.cache.monitor.0.vcpus=1
           cpu.cache.monitor.0.bank.count=2
           cpu.cache.monitor.0.bank.0.id=0
           cpu.cache.monitor.0.bank.0.bytes=4505600
           cpu.cache.monitor.0.bank.1.id=1
           cpu.cache.monitor.0.bank.1.bytes=5586944
           cpu.cache.monitor.1.name=vcpus_4-6
           cpu.cache.monitor.1.vcpus=4,5,6
           cpu.cache.monitor.1.bank.count=2
           cpu.cache.monitor.1.bank.0.id=0
           cpu.cache.monitor.1.bank.0.bytes=17571840
           cpu.cache.monitor.1.bank.1.id=1
           cpu.cache.monitor.1.bank.1.bytes=29106176
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The call of virResctrlMonitorGetStats will allocate the memory for
holding cache occupancy or memory bandwidth statistics.

This patch adds the function virResctrlMonitorFreeStats as the
opposing action of virResctrlMonitorGetStats to free the memory.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Return a list of virResctrlMonitorStatsPtr instead of
a virResctrlMonitorStats array in virResctrlMonitorGetStats.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Handle PVH domain type in both directions (xen-xl->xml, xml->xen-xl).
And add a test for it.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

builder="hvm" is deprecated since Xen 4.10, new syntax is type="hvm" (or
type="pv", which is default). Since the old one is still supported,
still use it when writing native config, so the config will work on
older Xen too (and will also not complicate tests).
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Make it easier to share HVM and PVH code where relevant. No functional
change.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

The test driver state (@testDriver) uses it's own reference counting
and locking implementation. Instead of doing that, convert @testDriver
into a virObjectLockable and use the provided functionalities.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

There are certain cases e.g. containers where the sysfs path might
exists, but might fail. Unfortunately the exact restrictions are only
known to libvirt when trying to write to it so we need to try it.

But in case it fails there is no need to fully abort, in those cases try
to fall back to the older ioctl interface which can still work.

That makes setting up a bridge in unprivileged LXD containers work.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1802906Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>
Reported-by: NBrian Candler <b.candler@pobox.com>

If migration is cancelled or confirm phase fails the domain
should be kept on the source even if VIR_MIGRATE_UNDEFINE_SOURCE
was requested.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

There are some checks done when parsing a migration cookie. For
instance, one of the checks ensures that the domain is not being
migrated onto the same host. If that is the case, then we are in
big trouble because the @vm is the same domain object used by
source and it has some jobs sets and everything so recovering
from failed cookie parsing would be needlessly hard.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The function currently takes virDomainObjPtr because it's using
both: the domain definition and domain private data.
Unfortunately, this means that in prepare phase we can't parse
migration cookie before putting incoming domain def onto domain
objects list (addressed in the very next commit). Change the
arguments so that virDomainDef and private data are passed
instead of virDomainObjPtr.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

There are several functions called in the cleanup path. Some of
them do report error (e.g. qemuDomainRemoveInactiveJob()) which
may result in overwriting an error reported earlier with some
less useful message.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

virt-aa-helper needs to grant QEMU access to VFIO MDEV devices.

This extends commit 74e86b6b which only covered PCI hostdevs for VFIO-PCI
assignment by now also covering vfio MDEVs.
It has still the same limitations regarding the device lifecycle, IOW we're
unable to predict the actual VFIO device being created, thus we need
wildcards.

Also note that the hotplug case, where apparmor is able to detect the actual
VFIO device during runtime, is already covered by commit 606afafb.
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

The path argument of virFileIsDir should be a full name
of file, pathname and filename. Fixed it by passing the
full path name to virFileIsDir.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Since the functions only return 0 or 1, they should return bool.  I missed the
change when "refactoring" the first commit.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The virGet*ID() functions should be called only if the user exists not when it
doesn't.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.

Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1545732

Implement the QEMU driver mechanism in order to set the polling
parameters for an IOThread within the bounds specified by the
QEMU qapi parameter passing.

Based heavily on patches originally posted by Pavel Hrdina
<phrdina@redhat.com>, but modified to only handle alterations
for a running guest. For the most part the API names changed,
the typed parameters removed the poll enabled value, and the
capabilities check was moved to just before the live attempt
to set. Since changes are only supported for a running guest,
no guest XML alterations were kept.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>