- 25 3月, 2013 7 次提交
-
-
由 Osier Yang 提交于
This abstracts nodeDeviceVportCreateDelete as an util function virManageVport, which can be further used by later storage patches (to support persistent vHBA, I don't want to create the vHBA using the public API, which is not good).
-
由 Osier Yang 提交于
This enrichs HBA's xml by dumping the number of max vports and vports in use. Format is like: <capability type='vport_ops'> <max_vports>164</max_vports> <vports>5</vports> </capability> * docs/formatnode.html.in: (Document the new XML) * docs/schemas/nodedev.rng: (Add the schema) * src/conf/node_device_conf.h: (New member for data.scsi_host) * src/node_device/node_device_linux_sysfs.c: (Collect the value of max_vports and vports)
-
由 Osier Yang 提交于
This adds two util functions (virIsCapableFCHost and virIsCapableVport), and rename helper check_fc_host_linux as detect_scsi_host_caps, check_capable_vport_linux is removed, as it's abstracted to the util function virIsCapableVport. detect_scsi_host_caps nows detect both the fc_host and vport_ops capabilities. "stat(2)" is replaced with "access(2)" for saving. * src/util/virutil.h: - Declare virIsCapableFCHost and virIsCapableVport * src/util/virutil.c: - Implement virIsCapableFCHost and virIsCapableVport * src/node_device/node_device_linux_sysfs.c: - Remove check_capable_vport_linux - Rename check_fc_host_linux as detect_scsi_host_caps, and refactor it a bit to detect both fc_host and vport_os capabilities * src/node_device/node_device_driver.h: - Change/remove the related declarations * src/node_device/node_device_udev.c: (Use detect_scsi_host_caps) * src/node_device/node_device_hal.c: (Likewise) * src/node_device/node_device_driver.c (Likewise)
-
由 Osier Yang 提交于
The use of 'stat' in nodeDeviceVportCreateDelete is only to check if the file exists or not, it's a bit overkill, and safe to replace with the wrapper of access(2) (virFileExists).
-
由 Osier Yang 提交于
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one hand it duplicates work of virFileReadAll, on the other hand, it's waste to use a function for it, as there is no other users of it. So I don't see why the file opening work cannot be done in "read_wwn_linux". "read_wwn_linux" can be abstracted as an util function. As what all it does is to read the sysfs entry. So this patch removes "open_wwn_file", and abstract "read_wwn_linux" as an util function "virReadFCHost" (a more general name, because after changes, it can read each of the fc_host entry now). * src/util/virutil.h: (Declare virReadFCHost) * src/util/virutil.c: (Implement virReadFCHost) * src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file, and read_wwn_linux) src/node_device/node_device_driver.h: (Remove the declaration of read_wwn_linux, and the related macros) src/libvirt_private.syms: (Export virReadFCHost)
-
由 Osier Yang 提交于
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA, and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA which supports vport.
-
由 Osier Yang 提交于
Guess it was created for the fc_host and vports_ops capabilities purpose, but there is enum virNodeDevScsiHostCapFlags for them, and enum virNodeDevHBACapType is unused, and actually both VIR_ENUM_DECL and VIR_ENUM_IMPL use the wrong enum name "virNodeDevHBACap".
-
- 23 3月, 2013 6 次提交
-
-
由 Martin Kletzander 提交于
When the container has the same '/dev' mount as host (no chroot), calling domainShutdown(WithFlags) shouldn't shutdown the host it is running on.
-
由 Daniel P. Berrange 提交于
For a root filesystem with type=file or type=block, the LXC container was forgetting to actually mount it, before doing the pivot root step. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Currently the lxc controller sets up the devpts instance on $rootfsdef->src, but this only works if $rootfsdef is using type=mount. To support type=block or type=file for the root filesystem, we must use /var/lib/libvirt/lxc/$NAME.devpts for the temporary devpts mount in the controller
-
由 Daniel P. Berrange 提交于
Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows room for other temporary mounts in the same directory
-
由 Daniel P. Berrange 提交于
Some of the LXC callbacks did not lock the virDomainObjPtr instance. This caused transient errors like error: Failed to start domain busy-mount error: cannot rename file '/var/run/libvirt/lxc/busy-mount.xml.new' as '/var/run/libvirt/lxc/busy-mount.xml': No such file or directory as 2 threads tried to update the status file concurrently Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The virDomainGetRootFilesystem was only returning filesystems with type=mount. This is bogus - any type of filesystem is valid as the root, if dst=/. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 22 3月, 2013 11 次提交
-
-
由 Jim Fehlig 提交于
Noticed that parsing bond interface XML containing the miimon element fails <interface type="bond" name="bond0"> ... <bond mode="active-backup"> <miimon freq="100" carrier="netif"/> ... </bond> </interface> This configuration does not contain the optional updelay and downdelay attributes, but parsing will fail due to returning the result of virXPathULong (a -1 when the attribute doesn't exist) from virInterfaceDefParseBond after examining the updelay attribute. While fixing this bug, cleanup the function to use virXPathInt instead of virXPathULong, and store the result directly instead of using a tmp variable. Using virXPathInt actually fixes a potential silent truncation bug noted by Eric Blake. Also, there is no cleanup in the error label. Remove the label, returning failure where failure occurs and success if the end of the function is reached.
-
由 Ján Tomko 提交于
-
由 Michal Privoznik 提交于
If users build with --enable-test-oom configure option, they get this error saying, virAllocTest* functions are not defined within tests/testutils.c.
-
由 Daniel P. Berrange 提交于
The 'nodeset' variable was never initialized, causing a later VIR_FREE(nodeset) to free uninitialized memory. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Paolo Bonzini 提交于
This does nothing more than adding the new device and capability. The device is present since QEMU 1.2.0. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
A better way to do this would be to use a configuration file like [iscsi "target-name"] user = name password = pwd and pass it via -readconfig. This would remove the username and password from the "ps" output. For now, however, keep this solution. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Only sheepdog actually required it in the code, and we can use 7000 as the default---the same value that QEMU uses for the simple "sheepdog:VOLUME" syntax. With this change, the schema can be fixed to allow no port. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This enables usage of commands like persistent reservations. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
libiscsi provides a userspace iSCSI initiator. The main advantage over the kernel initiator is that it is very easy to provide different initiator names for VMs on the same host. Thus libiscsi supports usage of persistent reservations in the VM, which otherwise would only be possible with NPIV. libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change this in the tests (while remaining backwards-compatible manner, because QEMU uses TCP as the default transport for both Gluster and NBD). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 3月, 2013 9 次提交
-
-
由 Peter Krempa 提交于
When the blockjob fails for some reason an event is emitted but the disk wasn't unmarked as being part of a active block copy operation.
-
由 Daniel P. Berrange 提交于
Some code mistakenly called virIdentityOnceInit directly instead of virIdentityInitialize(). This meant that one-time initializer was run many times with predictably bad results.
-
由 Michal Privoznik 提交于
The VIR_ERR_NO_SUPPORT error code is reserved for cases where an API is not implemented in a driver. It definitely should not be used when an API execution fails due to unsupported operation.
-
由 Daniel P. Berrange 提交于
The recent commit moved some of the use of libnuma out of the driver code, and into src/util/. It did not, however, update libvirt_util.la to link against libnuma. This caused linkage failure with virt-aa-helper, since nothing else caused libnuma to be pulled onto the linker command line. The fix removes all reference to NUMACTL_LIBS/CFLAGS from the various modules in src/Makefile.am and just adds them to the libvirt_util.la module, which everything else depends on. Technically a build-breaker fix, but wanted to wait for feedback on this Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Osier Yang 提交于
We should record the new disk src in the shared disk table for updating disk (CD-ROM or Floppy) API. Fortunately, we only allow to update the disk source now, otherwise we might also want to set the unpriv_sgio setting.
-
由 Paolo Bonzini 提交于
This plumbs in the XML description of iSCSI shares. The next patches will add support for the libiscsi userspace initiator. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Li Zhang 提交于
Now that VCPU number are removed from qemu_monitor_text.c (commit cc78d7ba), VCPU string checking also should be removed. Report-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
-
由 Gao feng 提交于
We will use virCgroupRemoveRecursively to remove cgroup directories in the coming patch. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
由 Guido Günther 提交于
but libvirt is built with --with-selinux. In this case getpeercon returns ENOPROTOOPT so don't return an error in that case but simply don't set seccon.
-
- 20 3月, 2013 7 次提交
-
-
由 Daniel P. Berrange 提交于
The virNetSocket & virIdentity classes accidentally got some conditionals using HAVE_SELINUX instead of WITH_SELINUX. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Gao feng 提交于
This patch adds cpuset cgroup support for LXC. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
由 Gao feng 提交于
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy to replace virLXCControllerSetupNUMAPolicy and qemuProcessInitNumaMemoryPolicy. This patch also moves the numa related codes to the file virnuma.c and virnuma.h Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
由 Olivia Yin 提交于
Compilation error when WITH_GNUTLS is 0, introduced in commit d5e83ad9.
-
由 Gao feng 提交于
Allow lxc using the advisory nodeset from querying numad, this means if user doesn't specify the numa nodes that the lxc domain should assign to, libvirt will automatically bind the lxc domain to the advisory nodeset which queried from numad. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
由 Gao feng 提交于
qemuGetNumadAdvice will be used by LXC driver, rename it to virNumaGetAutoPlacementAdvice and move it to virnuma.c Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
由 Olivia Yin 提交于
-