4cc1f1a0 introduced a crash when doing a
block copy as virStorageSourceInitChainElement was called on
"disk->mirror" that is still NULL at that point instead of "mirror"
which temporarily holds the mirror source struct until it's fully
initialized. This resulted into a crash as a NULL was dereferenced.

Reported by: Shanzi Yu <shyu@redhat.com>

Commit id '3ea661de' refactored the code to use the 'disk->src->path'
instead of getting the path from virDomainDiskGetSource().  The one
call to qemuOpenFile() didn't use the disk source path, rather it used
the path as passed from the caller (in this case 'vda') - this caused
a failure with the virt-test/tp-libvirt as follows:

$ virsh domblkinfo virt-tests-vm1 vda
error: cannot stat file '/home/virt-test/shared/data/images/jeos-20-64.qcow2': Bad file descriptor

$

While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Our documentation for features was rather sparse; this fleshes out
more of the details for other existing capabilities (and cost me
some time trawling git history).

* docs/formatcaps.html.in: Document it feature bits.
Signed-off-by: NEric Blake <eblake@redhat.com>

If the openvswitch service is stopped, and is followed by destroying a
VM, the openvswitch bridge translates into a state where it doesn't
recover the port configuration. While it successfully fetches data
from the internal DB, since the corresponding virtual interface does
not exists anymore the whole recovery process fails leaving restarted
VM with inability to connect to the bridge. The following set of
commands will trigger the problem:

virsh start vm
service openvswitch-switch stop
virsh destroy vm
service openvswitch-switch start
virsh start vm
Signed-off-by: NChunhe Li <lichunhe@huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Resolve issue introduced by commit id '13adf1b2'

Instead of allocating the virSecurityLabelDef structure ourselves, we
can utilize virSecurityLabelDefNew which even sets the default values
for us.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1113860

We've always done that. Well, until 990e46c4. Point is, if we don't
format model, we may lose a domain on libvirtd restart. If the
seclabel is implicit however, we should skip it's formatting.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Snapshots and block-copy have a flag that forces qemu to re-use existing
file. Our docs weren't exactly clear on what the existing file should
contain for this to actually work.

Re-word the docs a bit to state that the file needs to be pre-created in
the desired format and the backing chain metadata needs to be set prior
to handing it over to qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1084360

Libvirt generates external snapshot target file names for file backed
storage but not for block backed storage. Document the limitation.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1032363

Commit dae1568c converted the perms
member of the virStorageVolTarget struct into a pointer to make it
optional. But virStorageVolTargetDefFormat did not check perms for
NULL before dereferencing it.

Don't fail when there is nothing to do, as a tweak to the previous
patch regarding output of libvirt-UUID.files for LXC apparmor profiles
Signed-off-by: NEric Blake <eblake@redhat.com>

This was converted to a typedef in 5a2bd4c9 "conf: more enum
cleanups in "src/conf/domain_conf.h"" causing:
    libxl/libxl_conf.c: In function 'libxlDiskSetDiscard':
    libxl/libxl_conf.c:724:19: error: conversion to incomplete type
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

In lxc, we could not use setmem command
with --config options.
This patch will add support for this.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1066894

With current code it's possible to have for instance:

virsh dumpxml mydomain | grep seclabel
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>

what doesn't make any sense. We should reject the XML in the config
parsing phase.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similarly to the previous commit, boolean variables should not start
with 'no-' prefix.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This negation in names of boolean variables is driving me insane. The
code is much more readable if we drop the 'no-' prefix. Well, at least
for me.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For non-local storage drivers we can't expect to use the FDStream
backend for up/downloading volumes. Split the code into a separate
backend function so that we can add protocol specific code later.

This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
  <channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.

Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided

an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf

Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html

Commit 65d8c92a fixed the mingw spec file for 32-bit builds,
but forgot to make the adjustment for 64-bit builds:

Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/eblake/rpmbuild/BUILDROOT/mingw-libvirt-1.2.7-1.fc20.eblake1404944503.x86_64
error: Installed (but unpackaged) file(s) found:
   /usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/libvirt-lxc.pc
   /usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/libvirt-qemu.pc

* mingw-libvirt.spec.in (%files): List missing .pc files.
Signed-off-by: NEric Blake <eblake@redhat.com>

Pavel flagged a build regression under mingw, and traced it to a
recent flaw in gnulib for working around nl_langinfo. This picks
up the fix.

* gnulib: Update to latest, for mingw build fixes.
Signed-off-by: NEric Blake <eblake@redhat.com>

Translate libvirt discard settings into libxl-4.5 discard settings.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>

When creating cgroups for vcpu and emulator threads whilst starting a
domain, we explicitly skip creating those cgroups in case priv->cgroup
is NULL (cgroups not supported) because SetAffinity() serves the same
purpose.  If the host supports only some cgroups (the ones we need are
either unmounted or disabled in qemu.conf), we error out with weird
message even though we could continue starting the domain.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097028Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

According to the code, 'virsh numatune' supports integers for
specifying --mode as well as the string definitions "strict",
"interleave", and "preferred".  However, this possibility was not
documented anywhere, so this patch adds it to both the man page and
command help.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1085706Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The commit referenced above changed function arguments of
virStorageFileGetMetadataFromBuf() but didn't tweak the
ATTRIBUTE_NONNULL tied to them. This was caught by coverity as it
actually obeys them. We disabled them for GCC and thus it didn't show
up.

Additionally in commit 3ea661de I passed
NULL to the backingFormat argument which was also marked as nonnull. Use
a dummy int's address when the argument isn't supplied so that the code
doesn't need to change much.

Split out checking of invalid metadata type from the switch statement so
that we can use the typecasted enum value to allow tracking addition of
new items by the compliler.

Also avoids two dead-code break statements.

The default graphics channel mode is 'any', so as to defaultMode attribute.
If defaultMode and channel mode are all the default value 'any',
qemuConnectDomainXMLToNative will set TLSPort.
But in qemuBuildGraphicsSPICECommandLine, if spice_tls is not enabled, libvirtd
will report an error to tell the user that spice TLS is disabled in qemu.conf.

So qemuConnectDomainXMLToNative should check spice_tls is enabled,
then decide to allocate an tlsPort number to this graphics.

If user specified defaultMode is 'secure', qemuConnectDomainXMLToNative
could allocate tlsPort, and then let qemuBuildGraphicsSPICECommandLine reports
the spice_tls disabled error.

The related bug is:
https://bugzilla.redhat.com/show_bug.cgi?id=1113868Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Now that cgroups/security driver/locking driver support labelling of
individual images and tolerate network storage we don't have to refrain
from passing all image files to it. This allows removing the checking
code as we already make sure that the snapshot function won't be called
with unsupported options.

Now that security, cgroup and locking APIs support working on individual
images and we track the backing chain security info on a per-image basis
we can finally kill swapping the disk source in virDomainDiskDef and use
the virStorageSource directly.

Until now we were changing information about the disk source via
multiple steps of copying data. Now that we changed to a pointer to
store the disk source we might use it to change the approach to track
the data.

Additionally this will allow proper tracking of the backing chain.

When pivoting to a new disk source after a block commit (and possibly
after a soon-to-be-added active block commit) we changed just a few
fields to the new target. In case we'd copy a network disk to a local
file we'd not change the type properly.

To avoid such problems, switch to tracking of the source via changing of
the complete source struct to the one tracking the mirroring info.

Use the source struct and the corresponding function so that we can
avoid using the path separately. Now that
qemuDomainPrepareDiskChainElementPath isn't use anywhere, we can safely
remove it.

Additionally, the removal fixes a misaligned comment as the removed
function was added under a comment for a different function.

Instead of just returning the parent path, return the complete parent
source structure.

Add a few checks and avoid resolving relative links on networked
storage.

Refactor the code and reuse it to implement the functionality.

Refactor the existing code to allow re-using it for the per-image label
restore too.

Refactor the code and reuse it to implement the functionality.

Refactor the existing code to allow re-using it for the per-image label
restore too.

Refactor the code and reuse it to implement the functionality.