'listen' isn't a valid qemu-dm option, as reported a long time ago here:

https://bugzilla.redhat.com/show_bug.cgi?id=492958

Matches the near identical logic in qemu_conf.c

v2: When parsing sexpr, only match on ",server", rather than
    full ',server,nowait'.

Signed-off-by: NCole Robinson <crobinso@redhat.com>

* Incorporated Jim's feedback (v1 & v2)

* Moved case of DEVTYPE == "wlan" up as it's definitive that we have a network interface.

* Made comment more detailed about the wired case to explain better
  how it differentiates between wired network interfaces and USB
  devices.

* docs/formatdomain.html.in: Document <serial> element within
  <disk> and fix typo on <driver/> element

Eliminate almost all backward jumps by replacing this common pattern:

int
some_random_function(void)
{
    int result = 0;
    ...

  cleanup:
    <unconditional cleanup code>
    return result;

  failure:
    <cleanup code in case of an error>
    result = -1;
    goto cleanup
}

with this simpler pattern:

int
some_random_function(void)
{
    int result = -1;
    ...
    result = 0;

  cleanup:
    if (result < 0) {
        <cleanup code in case of an error>
    }

    <unconditional cleanup code>
    return result;
}

Add a bool success variable in functions that don't have a int result
that can be used for the new pattern.

Also remove some unnecessary memsets in error paths.

make rpm created dummy tests containing '-e #!/bin/sh' for me.

Otherwise, 'make check' in the python dir tries to reference a file in
docs that is built by 'make' but not by 'make check'.

* docs/Makefile.am (check-local): New rule.
Reported by Matthias Bolte.

Parse the BIOS UUID. This information may not be available, in that
case no host UUID is exposed in the capabilities XML.

The hotplug methods still had the qemuCmdFlags variable declared
as an int, instead of unsigned long long. This caused flag checks
to be incorrect for flags > 31

* src/qemu/qemu_driver.c: Fix integer overflow in hotplug

This allows libvirt to open the PCI device sysfs config file prior
to dropping privileges so qemu can access the full config space.
Without this, a de-privileged qemu can only access the first 64
bytes of config space.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Detect support
  for pci-assign.configfd option. Use this option when formatting
  PCI device string if possible
* src/qemu/qemu_driver.c: Pre-open PCI sysfs config file and pass
  to QEMU

We've been running into a lot of situations where
virGetHostname() is returning "localhost", where a plain
gethostname() would have returned the correct thing.  This
is because virGetHostname() is *always* trying to canonicalize
the name returned from gethostname(), even when it doesn't
have to.

This patch changes virGetHostname so that if the value returned
from gethostname() is already FQDN or localhost, it returns
that string directly.  If the value returned from gethostname()
is a shortened hostname, then we try to canonicalize it.  If
that succeeds, we returned the canonicalized hostname.  If
that fails, and/or returns "localhost", then we just return
the original string we got from gethostname() and hope for
the best.

Note that after this patch it is up to clients to check whether
"localhost" is an allowed return value.  The only place
where it's currently not is in qemu migration.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The virVirtualPortProfileFormat just went below the
virVirtualPortProfileParamsParseXML function and got inside the

The attached patch moves virVirtualPortProfileFormat below the #ifndef
PROXY block.

Allows listing existing pools and requesting information about them.

Alter the esxVI_ProductVersion enum in a way that allows to check for
product type by masking.

A build on Ubuntu reported:

|| Generating formatnwfilter.html.tmp
/dados/develop/libvirt/docs/formatnwfilter.html.in|390| HTML parser error : Unexpected end tag : p
||     </p>
||         ^
/dados/develop/libvirt/docs/formatnwfilter.html.in|705| HTML parser error : Unexpected end tag : code
||          <td>End of range of valid source ports</code></td>
||                                                       ^
/dados/develop/libvirt/docs/formatnwfilter.html.in|710| HTML parser error : Unexpected end tag : code
||          <td>Start of range of valid destination ports</code></td>
||                                                              ^

* docs/formatnwfilter.html.in: Fix invalid HTML constructs.
Reported by Eduardo Otubo.

* src/util/macvtap.c: (associatePortProfileId)
(disassociatePortProfileId): Move inside HAVE_MACVTAP
conditional.
Reported by Eduardo Otubo.

* tests/daemon-conf: Accommodate the fact that out template,
daemon/libvirtd.conf now contains an invalid host_uuid.
Convert it to a valid one before the final libvirtd-running
test that must terminate normally.

* daemon/libvirtd.c (remoteReadConfigFile): Diagnose an invalid
host UUID rather than silently exiting with status 7.

This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)

This patch introduces a dependency on libnl, which subsequent patches
will then use.

Changes from V1 to V2:
- added diffstats
- following changes in tree

Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:

https://bugzilla.redhat.com/show_bug.cgi?id=494005
https://bugzilla.redhat.com/show_bug.cgi?id=593565

Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.

v2: Leading // must be preserved, properly sanitize path=/, sanitize
    away /./ -> /

v3: Properly handle starting ./ and ending /.

v4: Drop all '.' handling, just sanitize / for now.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk

* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
  and add missing teardown code in unplug path

Basic live migration was broken by the commit that added
non-shared block support in two ways:

1)  It added a virCheckFlags() to doNativeMigrate().  Besides
the fact that typical usage of virCheckFlags() is in driver
entry points, and doNativeMigrate() is not an entry point,
it was missing important flags like VIR_MIGRATE_LIVE.  Move
the virCheckFlags to the top-level qemuDomainMigratePrepare2
and friends.

2)  It also added a memory leak in qemuMonitorTextMigrate()
by not freeing the memory used by virBufferContentAndReset().
This is fixed by storing the pointer in a temporary variable
and freeing it at the end.

With this patch in place, normal live migration works again.

v3: Instead of the churn for virCheckFlagsUI and UL, instead
always promote flags to an unsigned long and always use %lx
for the fprintf.
v2: Add back flags check, which required adding virCheckFlagsUI
and virCheckFlagsUL
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.

Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.

v2: Fix doc typos, change name to vnc_allow_host_audio

Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++.  Move
them inside of the braces, which should fix the problem.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This patch adds documentation of the nwfilter subsystem of libvirt to
the existing (web) docs.

git shortlog $(git log -1 --format=%H AUTHORS).. | grep -v "^ "

then add missing entries to AUTHORS.

* AUTHORS: Update.

Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The device path doesn't make use of guestAddr, so the memcpy corrupts
the guest info struct.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The virDomainGetBlockInfo API allows query physical block
extent and allocated block extent. These are normally the
same value unless storing a special format like qcow2
inside a block device. In this scenario we can query QEMU
to get the actual allocated extent.

Since last time:

 - Return fatal error in text monitor
 - Only invoke monitor command for block devices
 - Fix error handling JSON code

* src/qemu/qemu_driver.c: Fill in block aloction extent when VM
  is running
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API to query the highest block extent via info blockstats

* src/lxc/lxc_driver.c (lxcSetSchedulerParameters): Ensure that
"->field" is "cpu_shares" before possibly giving a diagnostic about
a type for a "cpu_shares" value.
Also, virCgroupSetCpuShares could fail without evoking a diagnostic.
Add one.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Volume detection in the scsi backend was duplicating code already
present in storage_backend.c. Let's drop the duplicate code.

Also, change the shared function name to be less generic, and remove
some error squashing in the other call site.

We were squashing error messages in a few cases. Recode to follow common
ret = -1 convention.

v2: Handle more error squashing issues further up in MakeNewVol and
    CreateVols. Use ret = -1 convention in MakeVols.

The event is already generated and sent by qemudDomainObjStart, no need
to do anything about here.

Some diagnostics had a hard-coded "libvirtd: " prefix, some used
"error: " and some used "argv[0]: ".  Always use "argv[0]: ".
* daemon/libvirtd.c (argv0): New global.
(main): Set it.
(version, usage): Remove argv0 parameter.  Use global; update callers.
(daemonForkIntoBackground): Use argv0:, not error:.
(qemudWritePidFile): Start each diagnostic with argv0:.
Suggested by Eric Blake.