This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.

* qemu/qemu_conf.h: Add flag for disabling automatic file permission
  changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
  for QEMU guests
* Makefile.am: Add new files

Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450

Revert commit 7aee2293 since it
is mistakenly adding an extra parameter to virsh that does not
belong there.

upate of as.po bn_IN.po de.po es.po gu.po hi.po kn.po ml.po mr.po or.po
pa.po pl.po ru.po ta.po te.po zh_CN.po and regeneration

Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.

When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.

For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:

    virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)

Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.

Typical use by hypervisors which prefer CPUID (such as VMware and Xen):

- convert guest CPU configuration from domain's XML into a set of raw
  data structures each representing one of the feature policies:

    cpuEncode(conn, architecture, guest_cpu_config,
              &forced_data, &required_data, &optional_data,
              &disabled_data, &forbidden_data)

- create a mask or whatever the hypervisor expects to see and pass it
  to the hypervisor

Typical use by hypervisors with symbolic model names (such as QEMU):

- get raw CPU data for a computed guest CPU:

    cpuGuestData(conn, host_cpu, guest_cpu_config, &data)

- decode raw data into virCPUDefPtr with a possible restriction on
  allowed model names:

    cpuDecode(conn, guest, data, n_allowed_models, allowed_models)

- pass guest->model and guest->features to the hypervisor

* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
  src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
  src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings

* po/POTFILES.in: adds src/conf/cpu_conf.c in teh set of files with
  translatable content
* src/conf/cpu_conf.c: remove an unused include

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate

updated el.po es.po or.po pl.po ta.po te.po
ran make update-po

* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function

The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.

* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
  from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor

* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module

* de.po ja.po it.po hi.po gu.po or.po mr.po ml.po kn.po ru.po pl.po
  pa.po te.po ta.po: many updates

* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* daemon/stream.c: Handle incoming stream data packets, queuing until
  stream becomes writable. Handle stream completion handshake
* po/POTFILES.in: Add daemon/stream.c

Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.

Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.

* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
  file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c

* as.po bn_IN.po de.po gu.po hi.po kn.po ko.po ml.po mr.po or.po pa.po
  pl.po ta.po te.po zh_CN.po got updated

This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.

(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)

* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
  error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
  Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.

Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.

* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.

* configure.in src/Makefile.am src/storage_backend.[ch]
  src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
  add a new module for storage multipath, it requires device-mapper

Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).

Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.

Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.

This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.

* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
  Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
  Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
  helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
  RNG schema

* po/*: and update the po set

* src/libvirt.c src/logging.c: Don't convert high priority levels to the
  debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
  when they're set to the empty string. Warn when the user specifies an
  invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings

* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h:
  Release of 0.7.0
* po/*.po*: updated and regenerated the localization pool

* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
  breaking syntax checking

* po/POTFILES.in: Add qemud/dispatch.c
* qemud/dispatch.c, qemud/dispatch.h: Generic code handling dispatch of
  RPC messages.
* qemud/Makefile.am: Add dispatch.c to build
* qemud/qemud.c: Include dispatch.h
* qemud/qemud.h: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.h
* qemud/remote.c: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.c, and dispatch_args, dispatch_ret, dispatch_fn & dispatch_data
  now in remote.h
* qemud/remote.h: Add typedefs for dispatch_args, dispatch_ret,
  dispatch_fn, dispath_data. Add remoteGetDispatchData() API

* src/interface_conf.c src/interface_conf.h: the import and export
  routines and the internal APIs
* src/Makefile.am: hook the new file in the makefiles
* src/libvirt_private.syms: export a few private symbols internally
* po/POTFILES.in: the new file contains translatable strings

This makes it so we record (via a git submodule)
a snapshot of whatever version of gnulib we're using,
and none of gnulib sources are in the libvirt repository.
The result is that we have as much reproducibility as when
we version-controlled imported copies of the gnulib sources,
but without the hassle of the manual process we used when
syncing with upstream.

Note that when you clone libvirt, you get only the libvirt
repository, but when you first run ./bootstrap, it clones
gnulib (at the SHA1 recorded via the submodule), creating
the .gnulib/ hierarchy.  Then, the bootstrap script runs
gnulib-tool to populate gnulib/ with the files that make
up the selected modules.

Put the following in your ~/.gitconfig file.
[alias]
  syncsub = submodule foreach git pull origin master

The update procedure is simple:
  git syncsub
  ...build & test...
  git commit -m 'gnulib: sync submodule to latest' .gnulib

* .gitmodules: New file.
* .gnulib: Initialize.
* bootstrap: Set up to use the new submodule.
Stop using --no-vc-files.
Don't remove .gitignore files.
Don't use or create .cvsignore.
Diagnose an invalid --gnulib-srcdir=DIR argument.
* build-aux/vc-list-files: Delete file, now pulled from gnulib.
* build-aux/useless-if-before-free: Likewise.
* po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since
it no longer contains translatable strings.
* gnulib/*: Remove gnulib/ hierarchy.