This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers

Add a --system flag to autogen.sh which gets turned into the args
--prefix=/usr --sysconfdir=/etc --localstatedir=/var to make it
easy to build with settings that match an RPM build

* autogen.sh: Add --system flag

Some of the very useful calls for XML parsing provided by util/xml.[ch]
were not exported as private symbols. This patch fixes this.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

add a set of tests for Xen interface type and model configurations

Xen HVM guests with PV drivers end up with two network interfaces for
each configured interface. One of them being emulated by qemu and the
other one paravirtual. As this might not be desirable, the attached
patch provides a way for users to specify that only paravirtual network
interface should be presented to the guest.

The configuration was inspired by qemu/kvm driver, for which users can
specify model='virtio' to use paravirtual network interface.

The patch adds support for model='netfront' which results in
type=netfront instead of type=ioemu (or nothing for newer xen versions)
in guests native configuration. Xen's qemu ignores interfaces with
type != ioemu and only paravirtual network device will be seen in the
guest.

Four possible configuration scenarios follow:

- no model specified in domain's XML
    - libvirt will behave like before this change; it will set
      type=ioemu for HVM guests on xen host which is not newer than
      XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU
    - covered by existing tests

- PV guest, any model
    - no functional change, model is passed as is (and ignored by the
      hypervisor)
    - covered by existing tests (e.g., *-net-e1000.*)
- HVM guest, model=netfront
    - type is set to "netfront", model is not specified
    - covered by new *-net-netfront.* tests

- HVM guest, model != netfront
    - type is set to "ioemu", model is passed as is
    - covered by new *-net-ioemu.* tests

The fourth scenario feels like a regression for xen newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified
in their guest's configuration won't see a paravirtual interface in
their guests any more. On the other hand, the reason for specifying a
model is most likely the fact that they want to use such model which
implies emulated interface. Users of older xen won't be affected at all
as their xen provides paravirtual interface regardless of the type used.

- src/xen/xend_internal.c: add netfront support for the xend backend
- src/xen/xm_internal.c: add netfront support for the XM serialization too

Also fixed serial port configuration which was broken due to recent
change in virDomainChrDef where targetType was newly added.

* src/Makefile.am: add new files
* src/vbox/vbox_driver.c: add case for version 3.1
* src/vbox/vbox_tmpl.c: refactor common patterns into macros, support for
  version 3.1, serial port configuration fix
* src/vbox/vbox_CAPI_v3_1.h, src/vbox/vbox_V3_1.c: generated code

esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:

  sdzy -> 700
  sdzz -> 701
  sdaaa -> 728
  sdaab -> 729

This line in virDiskNameToIndex causes this gap:

  idx = (idx + i) * 26;

Fixing it by altering this line to:

  idx = (idx + (i < 1 ? 0 : 1)) * 26;

Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.

* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed

* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
  qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
  in qemudDomainSave

On kernels with HZ=100, the resolution of sleeps in poll() is
quite bad. Doing a precise check on the expiry time vs the
current time will thus often thing the timer has not expired
even though we're within 10ms of the expected expiry time. This
then causes another pointless sleep in poll() for <10ms. Timers
do not need to have such precise expiration, so we treat a timer
as expired if it is within 20ms of the expected expiry time. This
also fixes the eventtest.c test suite on kernels with HZ=100

* daemon/event.c: Add 20ms fuzz when checking for timer expiry

* docs/drvqemu.html.in: Fix typo describing URI driver protocol

* src/xen/xend_internal.c (xend_op): Add ATTRIBUTE_SENTINEL.

The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

The configuration file setting is overriden by -f or --config, but
not with -c
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>

* libvirt-override.c: Add many missing calls to allow threading
  when entering C code, otherwise python blocks & then deadlocks
  when we have an async event to dispatch back into python code.
  Fix return value check for virDomainPinVcpu binding.

* tests/.valgrind.supp: Ignore capng problems

* src/test/test_driver.c: Fix leak of vcpu info, and nodedevice
  info

* src/qemu/qemu_driver.c: Free cgroup ACLs

Commit 790f0b30 causes the contents of
the names array to be freed even on success, resulting in no listing of
defined but inactive Xen domains.

Spotted by Jim Fehlig

* src/qemu/qemu_conf.c: Fix default disk type to be 'FILE'
  again, after previous commit accidentally changed it

* src/qemu/qemu_driver.c: remove the port filter if the network device
  is detached via virDomainDetachDevice.

Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks

The cpu_set_t type can only cope with NR_CPUS <= 1024, beyond this
it is neccessary to use alternate CPU_SET maps with a dynamically
allocated CPU map

* src/util/processinfo.c: Support new unlimited size CPU set type

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* .x-sc_prohibit_strcmp_and_strncmp: Ignore docs/

0.7.3 was broken

* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
  NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
  udev

* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate

HAL has been deprecated since F12 and RHEL-6, so if building on
these platforms, switch on the udev driver instead

* libvirt.spec.in: Activate udev on F12/RHEL6

* docs/formatdomain.html.in: document that vnet and vif are reserved
  names and will be ignored if manually specified.

* python/generator.py python/libvirt-override-api.xml
  python/libvirt-override.c: implement the bindings for
  virConnectListInterfaces() and virConnectListDefinedInterfaces()

* tools/virsh.pod: the man page was stating that most operations
  are asynchronous while in fact most of them are synchronous except
  domain shutdown, setvcpus and setmem.

* src/xen/xm_internal.c: the XM driver was not checking for previously
  defined UUID on new defines. Similar to virDomainObjIsDuplicate()
  behaviour.

For backward compatibility we used to add the tty path as
a tty attribute on console of type pty, duplicating the value
now found in source/@path, but the Relax-NG grammar wasn't
extended for this
    <console type='pty' tty='/dev/pts/8'>
      <source path='/dev/pts/8'/>
      <target port='0'/>
    </console>

* docs/schemas/domain.rng: allow an optional tty attribute
  containing a devicePath

Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests

* src/util/iptables.c: `--option !  this` is deprecated in favor of
  `! --option this` syntax, change the output command accordingly

Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there

* src/conf/node_device_conf.c: remove the output of the 2 fields

I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs"  Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.

* src/conf/node_device_conf.c src/conf/node_device_conf.h
  src/node_device/node_device_driver.c src/node_device/node_device_hal.c
  src/node_device/node_device_udev.c: remove devicePath from the
  structure and use def->sysfs_path instead

* src/node_device/node_device_driver.c: two places where not calling
  virReportOOMError after strdup failure