Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Return whether the live or persistent definition was returned. Sometimes
it's necessary to base the decisions on this.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366989

QEMU added another virtio-net tunable [1]. It basically allows
users to set the size of RX virtio ring. But because virtio-net
uses two separate ring buffers to pass data from/to guest they
named it explicitly rx_queue_size. We should expose it in our XML
too.

1: http://lists.nongnu.org/archive/html/qemu-devel/2016-08/msg02029.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.

Likewise, if the environment exists the hot unplug needs adjustment as
well.  Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Since the domain lock is not held during preparation of an external XML
config, it is possible that the value can change resulting in unexpected
failures during ABI consistency checking for some save and migrate
operations.

This patch adds a new flag to skip the checking of the cur_balloon value
and then sets the destination value to the source value to ensure
subsequent checks without the skip flag will succeed.

This way it is protected from forges and is keeped up to date too.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:

<domain>
  ...
  <vcpu current='2'>3</vcpu>
  <vcpus>
    <vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
    <vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
    <vcpu id='1' enabled='no' hotpluggable='yes'/>
  </vcpus>
  ...

The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.

This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1356937

Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.

This is similar to the work done for emulator quota and period by
commit ids 'b65dafa8' and 'e051c482'.

Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae0') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.

Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.

According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.

To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.

For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.

For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.

Since commit id 'fb063500' these are no longer called, so remove them

New type of <devices> <filesystem type= 'volume'> is introduced.
This patch allows to use volumes for storing the filesystem, that is
accessed from the guest e.g. root directory for container.

To take advantage of volumes as a backend of filesystem volume
and pool names should be specified:
<filesystem type= 'volume'>
 <source pool='pool name' volume='volume name'/>
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

A device with an attribute 'model', with just one model
so far:

<devices>
  ...
  <iommu model='intel'/>
</devices>

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

Allow to store driver specific data on a per-vcpu basis.

Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.

Our copy functions format and parse XML thus are not able to copy data.
Annotate the private data pointers that this is happening.

Libxl is the last user and I don't have the toolchain prepared to
compile the libxl driver. Move it to the libxl driver to avoid having to
refactor the code.

Few arguments of the function are not necessary any more which leads to
some cleanups. The 'uri' argument had a stray ATTRIBUTE_UNUSED.

This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:

    <interface type='ethernet'>
      <mac address='00:16:3e:0f:ef:8a'/>
      <source>
        <ip address='192.168.122.12' family='ipv4'
            prefix='24' peer='192.168.122.1'/>
        <ip address='192.168.122.13' family='ipv4' prefix='24'/>
        <route family='ipv4' address='0.0.0.0'
               gateway='192.168.122.1'/>
        <route family='ipv4' address='192.168.124.0' prefix='24'
               gateway='192.168.124.1'/>
      </source>
    </interface>

In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).

(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).

(This patch had been pushed earlier in
commit fe6a7789, but was reverted in
commit d6584565 because it had been
accidentally pushed during the freeze for release 2.0.0)

A helper that will execute a callback on every USB device
in the domain definition.

With an ability to skip USB hubs, since we will want to treat
them differently in some cases.

Some code paths already assume that it is allocated since it was always
allocated by virDomainPerfDefParseXML. Make it member of virDomainDef
directly so that we don't have to allocate it all the time.

This fixes crash when attempting to connect to an existing process via
virDomainQemuAttach since we would not allocate it in that code path.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1350688

This reverts commit fe6a7789.

This feature was accidentally pushed in the feature freeze.

This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:

    <interface type='ethernet'>
      <mac address='00:16:3e:0f:ef:8a'/>
      <source>
        <ip address='192.168.122.12' family='ipv4'
            prefix='24' peer='192.168.122.1'/>
        <ip address='192.168.122.13' family='ipv4' prefix='24'/>
        <route family='ipv4' address='0.0.0.0'
               gateway='192.168.122.1'/>
        <route family='ipv4' address='192.168.124.0' prefix='24'
               gateway='192.168.124.1'/>
      </source>
    </interface>

In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).

(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).

All the same information was already there, just in slightly different
places in the virDomainNetDef.

a.k.a. <hostdev mode='capabilities' type='net'>.

This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.

These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.

Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.

When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).

When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.

In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.

This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.

NB: I decided on this course of action after mentioning the
inconsistency here:

  https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html

and getting encouragement do eliminate it in a later IRC discussion
with danpb.

We need to clear these out without freeing the object completely.

I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).

(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)

Basically, there are just two functions introduced here:
virDomainRedirdevDefFind which looks up given redirdev in domain
definition, and virDomainRedirdevDefRemove which removes the
device at given index in the array of devices.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While we need to know the difference between the total memory stored in
<memory> and the actual size not included in the possible memory modules
we can't pre-calculate it reliably. This is due to the fact that
libvirt's XML is copied via formatting and parsing the XML and the
initial memory size can be reliably calculated only when certain
conditions are met due to backwards compatibility.

This patch removes the storage of 'initial_memory' and fixes the helpers
to recalculate the initial memory size all the time from the total
memory size. This conversion is possible when we also make sure that
memory hotplug accounts properly for the update of the total memory size
and thus the helpers for inserting and removing memory devices need to
be tweaked too.

This fixes a bug where a cold-plug and cold-remove of a memory device
would increase the size reported in <memory> in the XML by the size of
the memory device. This would happen as the persistent definition is
copied before attaching the device and this would lead to the loss of
data in 'initial_memory'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344892

This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively.  It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.

For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs.  If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.

To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>