The string is not modified so it does not make sense to have a copy.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow looking up also via QOM id and rename the function accordingly.
Also add documentation of the specifics.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use the nodename to resize the device rather than the drive alias.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With -blockdev the drive alias can't be used any more so we need to
switch to the QOM name.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use the index stored in virStorageSource struct rather than
recalculating it. Currently we'd report proper numbers but that will
change with blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow referring to individual node name to resize.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuDomainAttachDeviceDiskLive to change the media in
qemuDomainChangeDiskLive as the former function already does all the
necessary steps to prepare the new medium.

This also allows us to turn qemuDomainChangeEjectableMedia static.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Remove the pointless "empty path" check and use a better error message
if the disk was not found.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This reverts commit 9cf38263.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 0f80c718.

Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.

Conflicts:
  src/util/vircgroup.c: context because 94f1855f is not
  reverted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Modify virCgroupFree function signature to take a value of type
virCgroupPtr instead of virCgroupPtr * as the parameter.

Change the argument type in all calls to virCgroupFree function
from virCgroupPtr * to virCgroupPtr. This is a step towards
having consistent function signatures for Free helpers so that
they can be used with VIR_AUTOPTR cleanup macro.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1559867

When attaching a device to the domain we need to be sure
to use the correct domain definition (vm->def or vm->newDef)
when calling virDomainDeviceDefParse because the post parse
processing algorithms that may assign an address for the
device will use whatever domain definition was passed in.

Additionally, some devices (SCSI hostdev and SCSI disk) use
algorithms that rely on knowing what already exists of the
other type when generating the new device's address. Using
the wrong VM definition could result in duplicated addresses.

In the case of the bz, two hostdev's with no domain address
provided were added to the running domain's config only.
However, the parsing algorithm used the live domain in
order to figure out the host device address resulting in
the same address being used and a subsequent start failing
due to duplicate address.

Fix this by separating the checks/code into CONFIG and LIVE
processing using the correct definition for each block and
performing cleanup for both options as necessary.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1589115

When doing a memory snapshot qemuOpenFile() is used. This means
that the file where memory is saved is firstly attempted to be
created under root:root (because that's what libvirtd is running
under) and if this fails the second attempt is done under
domain's uid:gid. This does not make much sense - qemu is given
opened FD so it does not need to access the file. Moreover, if
dynamicOwnership is set in qemu.conf and the file lives on a
squashed NFS this is deadly combination and very likely to fail.

The fix consists of using:

  qemuOpenFileAs(fallback_uid = cfg->user,
                 fallback_gid = cfg->group,
                 dynamicOwnership = false)

In other words, dynamicOwnership is turned off for memory
snapshot (chown() will still be attempted if the file does not
live on NFS) and instead of using domain DAC label, configured
user:group is set as fallback.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have a saner replacement for checking if the disk source is
the same use it instead of formatting qemu command-line chunks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In some cases backing chain needs to be cleared prior to re-detection.
Move this step out of qemuDomainDetermineDiskChain as only certain
places need it and the function itself is able to skip to the end of the
chain to perform detection.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow updating capacity for the block devices returned by
qemuDomainBlocksStatsGather and replace the open-coded call to
qemuMonitorGetAllBlockStatsInfo by the helper.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With 'transaction' support we don't need to keep around the multipurpose
code which would create the snapshot if 'transaction' is not supported.

To simplify this add a new helper that just wraps the arguments for
'blockdev-snapshot-sync' operation in 'transaction' and use it instead
of qemuBlockSnapshotAddLegacy.

Additionally this allows to format the arguments prior to creating the
file for simpler cleanup.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Currently we'd audit that we managed to format the data for the
'transaction' command rather than the (un)successful attempt to create
the snapshot.

Move the auditing code so that it can actually audit the result of the
'transaction' command.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In the cleanup path we already checked whether a snapshot needed to be
taken by looking into the collected data. Use the same approach when
creating the snapshot command data and when committing the changes to the
domain definition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Since we now always do the snapshot via the 'transaction' command we can
drop the code which would enter monitor for individual disk snapshots.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

While qemu supports the 'transaction' command since v1.1.0
(52e7c241ac766406f05fa) and the 'blockdev-snapshot-sync' command since
v0.14.0-rc0 we need to keep the capability bits present since some qemu
downstreams (RHEL/CentOS 7 for example) chose to cripple qemu by
arbitrarily compiling out some stuff which was already present at that
time.

To simplify the crazy code just require both commands to be present at
the beginning of an external snapshot so that we can remove the case when
'transaction' would not be supported.

This also allows to drop any logic connected to the
VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC flag since snapshots are atomic with
the 'transaction' command.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If a domain is configured to start on boot, it has a symlink to the
domain definition inside the autostart directory. If you rename this
domain, the definition is renamed too. The symlink need to be pointed to
this renamed file. This commit recreates the symlink after renaming the
XML file.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1594985Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.

All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versions
https://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson

Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.

Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.

Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When VIR_DOMAIN_SCHEDULER_GLOBAL_PERIOD is matched "cputune.global_period"
should be updated and not "cputune.period".
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1600427Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This argument is not used anymore. The only function that is
passing non-NULL (qemuDomainSaveMemory) does not actually care
for the value (after 23087cfd) and every other caller just
passes NULL anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1585108

When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This was lost in c57f3fd2. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When updating device it's worth parsing live info too as users
might want to update it as well.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.

This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

fix 'device' leak in qemuDomainBlockJobSetSpeed

Signed-off-by: Jie Wang <wangjie88.huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1591628

Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:

error: internal error: unexpected async job 6 type expected 0

So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.

For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>