Commit a2619962 introduced virFilePrintf to work around the fact
that gnulib doesn't (yet) provide guarantees about fprintf() vs.
%z, which in turn causes all sorts of mingw compilation errors:

../../tests/testutils.c: In function 'virtTestResult':
../../tests/testutils.c:101:9: error: unknown conversion type character 'z' in format [-Werror=format=]
         fprintf(stderr, "%3zu) %-60s ", testCounter, name);
         ^

Rather than s/fprintf/virFilePrintf/ (and reformatting loads of
lines) across multiple files, it's easier to just hack the entire
testsuite to take advantage of our helper function.

* tests/testutils.c: s/fprintf/virFilePrintf/ for mingw.
Signed-off-by: NEric Blake <eblake@redhat.com>

A cross-compile to mingw failed:

  CC       virsystemdmock_la-virsystemdmock.lo
../../tests/virsystemdmock.c:29:6: error: 'dbus_connection_set_change_sigpipe' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
 void dbus_connection_set_change_sigpipe(dbus_bool_t will_modify_sigpipe ATTRIBUTE_UNUSED)
      ^

But when you think about it, systemd is Linux-only, and even our
use of LD_PRELOAD to provide mock syscalls is Linux-only.

* tests/virsystemdmock.c: Avoid compilation outside Linux.
Signed-off-by: NEric Blake <eblake@redhat.com>

The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.

Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.

It was added in commit 14e7e0ae
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.

It was added in commit 14e7e0ae
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Current automake enables parallel test by default, which means test
details are only logged in test-suite.log and not printed to stderr.
This patch makes test failures directly visible in RPM build logs even
when parallel tests are turned on.

Depending on the set of mingw packages installed, it is possible
that other .c files hit the mingw header pollution from the
virdbus.h file.

In file included from ../../src/rpc/virnetserver.c:39:0:
../../src/util/virdbus.h:41:35: error: expected ';', ',' or ')' before 'struct'
                       const char *interface,
                                   ^

* src/util/virdbus.h (virDBusCallMethod): Match .c file change.
Signed-off-by: NEric Blake <eblake@redhat.com>

On platforms without decent group support, the build failed:

Cannot export virGetGroupList: symbol not defined
./.libs/libvirt_security_manager.a(libvirt_security_manager_la-security_dac.o): In function `virSecurityDACPreFork':
/home/eblake/libvirt-tmp/build/src/../../src/security/security_dac.c:248: undefined reference to `virGetGroupList'
collect2: error: ld returned 1 exit status

* src/util/virutil.c (virGetGroupList): Provide dummy implementation.
Signed-off-by: NEric Blake <eblake@redhat.com>

Our recent conversion to make VIR_ALLOC report oom wasn't
tested on mingw:

In file included from ../../src/util/virthread.c:29:0:
../../src/util/virthreadwin32.c: In function 'virCondWait':
../../src/util/virthreadwin32.c:166:81: error: 'VIR_FROM_THIS' undeclared (first use in this function)
     if (VIR_REALLOC_N(c->waiters, c->nwaiters + 1) < 0) {
                                                                                 ^

* src/util/virthreadwin32.c (VIR_FROM_THIS): Define.
Signed-off-by: NEric Blake <eblake@redhat.com>

Mingw headers pollute the namespace.

  CC       libvirt_util_la-virdbus.lo
../../src/util/virdbus.c:1102:35: error: expected ';', ',' or ')' before 'struct'
                       const char *interface,
                                   ^

* src/util/virdbus.c (virDBusCallMethod): Avoid 'interface'.
Signed-off-by: NEric Blake <eblake@redhat.com>

The previous patch was incomplete.

  CC       libvirt_util_la-vircgroup.lo
../../src/util/vircgroup.c:70:12: error: 'virCgroupPartitionEscape' declared 'static' but never defined [-Werror=unused-function]
 static int virCgroupPartitionEscape(char **path);
            ^

* src/util/vircgroup.c (virCgroupPartitionEscape): Move forward
declaration inside conditional.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virCgroupValidateMachineGroup method calls some functions
which are only conditionally compiled, thus it too must be
made conditional. This fixes the build on non-Linux hosts.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A VPATH build 'make check' was failing with:

  GEN      check-driverimpls
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.h: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.c: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
...
  GEN      check-aclrules
cannot read ../../src/../../src/remote/remote_protocol.x at ../../src/check-aclrules.pl line 128.

because $(srcdir) was being prepended to file names that already
included it.

* src/Makefile.am (check-driverimpls): Don't add srcdir twice.
Signed-off-by: NEric Blake <eblake@redhat.com>

File hasn't been really touched for 7 years. And with recent rawhide
changes it contributed to an RPM build failure. Let's drop it.

This also removes installation of a libvirt-python doc dir, so drop
handling of it from the RPM spec.

When the legacy Xen driver probes with a NULL URI, and
finds itself running on Xen, it will set conn->uri. A
little bit later though it checks to see if libxl support
exists, and if so declines the driver. This leaves the
conn->uri set to 'xen:///', so if libxl also declines
it, it prevents probing of the QEMU driver.

Once a driver has set the conn->uri, it must *never*
decline an open request. So we must move the libxl
check earlier
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

CPU data structure is refined, which causes one compile error for PPC.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025e introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch

Otherwise, with new enough gcc compiling at -O2, the build fails with:
../../src/conf/domain_conf.c: In function ‘virDomainDeviceDefPostParse’:
../../src/conf/domain_conf.c:2821:29: error: ‘cnt’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
             for (i = 0; i < *cnt; i++) {
                             ^
../../src/conf/domain_conf.c:2795:20: note: ‘cnt’ was declared here
         size_t i, *cnt;
                    ^
../../src/conf/domain_conf.c:2794:30: error: ‘arrPtr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         virDomainChrDefPtr **arrPtr;
                              ^

* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Always
assign into output parameters.
Signed-off-by: NEric Blake <eblake@redhat.com>

By setting the default partition in libvirt_lxc it is not
visible when querying the live XML. Move setting of the
default partition into libvirtd virLXCProcessStart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Adjust these drivers to handle their Autostart functionality after each
of the drivers has gone through their Initialization functions

Separation allows for dependent drivers to be make a connection during
the AutoStart phase of state initialization.

Ignore NULL pool in testSetVolumeType to silence Coverity,
even though we only call it with NULL pool when vol is also NULL.

(13) Event var_deref_model:	Passing null pointer "inputpool" to
function "testSetVolumeType(virStorageVolDefPtr, virStoragePoolDefPtr)",
which dereferences it. [details]
Also see events: [assign_zero]

95    testSetVolumeType(inputvol, inputpool);

ip has to be NULL at this point.

This fixes a crash if one of them is missing.

https://bugzilla.redhat.com/show_bug.cgi?id=988718

Decrementing it when it was already 0 causes an invalid free
in virNetworkDefUpdateDNSHost if virNetworkDNSHostDefParseXML
fails and virNetworkDNSHostDefClear gets called twice.

virNetworkForwardDefClear left the number untouched even if it
freed all the elements.

The outbound/@peak is ignored (since QoS was introduced). This is due to
kernel limitation of know allowing ingress filters to have peak just
average rate. However, we should document this limitation to not confuse
users.

Interestingly, we had <code>floor<code> ... </code>outbound</code> which
results in much larger block of text to be written in code style that
intended.

Signed-off-by: NAlex Jia <ajia@redhat.com>

Noticed that the expected "not supported" error is dropped when
invoking 'virsh snapshot-list dom' on a Xen installation running
the libxl driver

 virsh snapshot-list test
 error: Invalid snapshot: virDomainSnapshotFree

The error is overwritten by a call to virDomainSnapshotFree
in cleanup code within cmdSnapshotList.  Prevent overwritting
the real error by not calling virDomainSnapshotFree with a NULL
virDomainSnapshotPtr.

If the app has provided a whitelist of controllers to be used,
we skip detecting its mount point. We still, however, fill in
the placement info which later confuses the machine name
validation code. Skip detecting placement if the controller
mount point is not set
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When detecting cgroups we must honour any controllers
whitelist the driver may have.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When a VM has an 'emulator' child cgroup present, we must
strip off that suffix when detecting the cgroup for a
machine

Rename the virCgroupIsValidMachineGroup method to
virCgroupValidateMachineGroup to make a bit clearer
that this isn't simply a boolean check, it will make
changes to the object.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

since sizeof(int) != sizeof(long long) on 32bit archs.

This unbreaks virdbustest which otherwise fails like:

 (gdb) bt
 #0  __strlen_sse2_bsf () at ../sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S:50
 #1  0x405907d2 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
 #2  0x4057c140 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
 #3  0x4057e7ec in dbus_message_iter_append_basic () from /lib/i386-linux-gnu/libdbus-1.so.3
 #4  0x400742ec in virDBusMessageIterEncode (args=0xbfd4b8f0 "k\321\004\b.", types=0x804d260 "",
     rootiter=0xbfd4b844) at util/virdbus.c:560
 #5  virDBusMessageEncodeArgs (msg=msg@entry=0x893c278, types=types@entry=0x804d25c "sais",
     args=args@entry=0xbfd4b8d8 "r\320\004\b\003") at util/virdbus.c:921
 #6  0x40075917 in virDBusMessageEncode (msg=0x893c278, types=0x804d25c "sais") at util/virdbus.c:959
 #7  0x0804a4a1 in testMessageArray (args=0x0) at virdbustest.c:195
 #8  0x0804c404 in virtTestRun (title=title@entry=0x804cfcb "Test message array ",
     nloops=nloops@entry=1, body=body@entry=0x804a3f0 <testMessageArray>, data=data@entry=0x0)
     at testutils.c:168
 #9  0x08049346 in mymain () at virdbustest.c:384
 #10 0x0804cb2e in virtTestMain (argc=argc@entry=1, argv=argv@entry=0xbfd4bb24,
     func=func@entry=0x80492c0 <mymain>) at testutils.c:764
 #11 0x080491af in main (argc=1, argv=0xbfd4bb24) at virdbustest.c:393

This allows testing the command line for cloning file-based
volumes into logical volumes and vice versa.

Reuse the XML files in storagevolxml2xmlin.

(This requires changing a few backing files to /dev/null,
since virStorageBackendCreateQemuImgCmd checks for its
presence)

Reuse the pool definition from storagepoolxml2xmlin.

Reindent them to put the input volume on a separate line.