Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit ff5f30b6)

CVE-2013-6458

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit f93d2caa)

CVE-2013-6458

Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.

(cherry picked from commit b7992595)

CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069

When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.

That said, every API that is going to begin a job should do that before
fetching data from vm->def.

(cherry picked from commit db86da5c)

by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:

 # ./daemon/libvirtd -v
 *** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
 ======= Backtrace: =========
 /lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
 /lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
 /home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
 /home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
 /lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
 /lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: NDario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
(cherry picked from commit f9ee91d3)

Conflicts:
	src/libxl/libxl_driver.c

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain> --hard-limit 133T'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
 #1  0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
     at util/vircgroup.c:669
 #2  0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
 #3  0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
 #4  0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
     at util/vircgroup.c:1944
 #5  0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
 #6  0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
 #7  0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
     at remote_dispatch.h:7621
 #8  0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
     ret=0x7fffe40b84f0) at remote_dispatch.h:7591
 #9  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:435
 #10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:305
 #11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
     prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
 #12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 9faf3f29)

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain>'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
 #1  0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
 #2  0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
 #3  0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
     at util/vircgroup.c:1962
 #4  0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
 #5  0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
 #6  0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote.c:1895
 #7  0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote_dispatch.h:4050
 #8  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:435
 #9  0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:305
 #10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
     prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
 #11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit f8c1cb90)

Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.

==11192== Invalid write of size 4
==11192==    at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192==    by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192==    by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192==    by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192==    by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192==    by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192==    by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192==    by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192==    by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192==    by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192==    by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192==    by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192==  Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192==    at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192==    by 0x5079A2F: virFree (viralloc.c:580)
==11192==    by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192==    by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192==    by 0x50C2991: virObjectUnref (virobject.c:262)
==11192==    by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192==    by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192==    by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192==    by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192==    by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192==    by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192==    by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 1f2f879e)

When opening a new connection to the driver, nwfilterOpen
only succeeds if the driverState has been allocated.

Move the privilege check in driver initialization before
the state allocation to disable the driver.

This changes the nwfilter-define error from:
error: cannot create config directory (null): Bad address
To:
this function is not supported by the connection driver:
virNWFilterDefineXML

https://bugzilla.redhat.com/show_bug.cgi?id=1029266
(cherry picked from commit b7829f95)

Avoid people introducing security flaws in their apps by
forbidding the use of libvirt.so in setuid programs, with
a check in virInitialize.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9cd6a57d)

Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9b0af092)

We already have stubs for getuid, geteuid, getgid but
not for getegid. Something in gnulib already does a
check for it during configure, so we already have the
HAVE_GETEGID macro defined.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c566fa1a)

We don't want setuid programs automatically spawning libvirtd,
so disable any use of autostart when setuid.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 171bb129)

We don't know enough about quality of external libraries used
for non-UNIX transports, nor do we want to spawn external
commands when setuid. Restrict to the bare minimum which is
UNIX transport for local usage. Users shouldn't need to be
running setuid if connecting to remote hypervisors in any
case.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e22b0232)

The use of getenv is typically insecure, and we want people
to use our wrappers, to force them to think about setuid
needs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 71b21f12)

Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 1e4a02bd)

When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering

  virCommandAddEnvPassAllowSUID
  virCommandAddEnvPassBlockSUID

And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9b8f307c)

Conflicts:
	src/qemu/qemu_command.c

In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace

 #0  0x00007f0cddb653ec in free () from /lib64/libc.so.6
 #1  0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
 #2  0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
 #3  0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
 #4  0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
 #5  0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352

Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.

I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.

In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 97973ebb)

The log message regex has been

[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :

The precedence of '|' is high though, so this is equivalent to matching

   [0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug

Or

   info

Or

   warning

Or

   error :

Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.

A test case is also added to validate correctness.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 5787f0b9)

Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 8adc9269)

'make rpm' failed if ~/.rpmmacros contains '%_without_lxc 1',
which simulates the case of not having lxc available.

RPM build errors:
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/etc/libvirt/virt-login-shell.conf
    File not found by glob: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/share/man/man1/virt-login-shell.1*
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/bin/virt-login-shell
make: *** [rpm] Error 1

Reported by Dan Berrange.

* libvirt.spec.in: Mark virt-login-shell as conditional on lxc.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit d42906fd)

The virt-login-shell binary shouldn't need to execute programs
relying on $PATH, but just in case set a fixed $PATH value
of /bin:/usr/bin
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit d665003d)

Commit d76227be added functions virDomainCreateWithFiles and
virDomainCreateXMLWithFiles, but there was a little piece missing in
python bindings.  This patch fixes proper passing of file descriptors
in the overwrites of these functions.

On systems where gnutls uses libgcrypt, I'm seeing the following
build failure

libvirt.c:314: error: variable 'virTLSThreadImpl' has initializer but incomplete type
libvirt.c:319: error: 'GCRY_THREAD_OPTION_PTHREAD' undeclared here (not in a function)
...

Fix by undefining WITH_GNUTLS_GCRYPT in config-post.h

After commit 3e2f27e1, I've noticed build failures of virt-login-shell
when libapparmor-devel is installed on the build host

CCLD     virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o):
In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined
reference to `aa_change_profile'
collect2: error: ld returned 1 exit status

I was about to commit an easy fix under the build-breaker rule
(build-fix-1.patch), but thought to extend the notion of SECDRIVER_LIBS
to SECDRIVER_CFLAGS, and use both throughout src/Makefile.am where it
makes sense (build-fix-2.patch).

Should I just stick with the simple fix, or is something along the lines
of patch 2 preferred?

Regards,
Jim

>From a0f35945f3127ab70d051101037e821b1759b4bb Mon Sep 17 00:00:00 2001
From: Jim Fehlig <jfehlig@suse.com>
Date: Mon, 21 Oct 2013 15:30:02 -0600
Subject: [PATCH] build: fix virt-login-shell build with apparmor

With libapparmor-devel installed, virt-login-shell fails to link

CCLD     virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o): In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined reference to `aa_change_profile'
collect2: error: ld returned 1 exit status

Fix by linking libvirt_setuid_rpc_client with previously determined
SECDRIVER_LIBS in src/Makefile.am.  While at it, introduce SECDRIVER_CFLAGS
and use both throughout src/Makefile.am where it makes sense.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Conflicts:
	src/Makefile.am: Context

The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.

The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.

Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 3e2f27e1)

We don't want to inherit any FDs in the new namespace
except for the stdio FDs. Explicitly close them all,
just in case some do not have the close-on-exec flag
set.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit b7fcc799)

We must not allow file/syslog/journald log outputs when running
setuid since they can be abused to do bad things. In particular
the 'file' output can be used to overwrite files.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 8c3586ea)

Care must be taken accessing env variables when running
setuid. Introduce a virGetEnvAllowSUID for env vars which
are safe to use in a setuid environment, and another
virGetEnvBlockSUID for vars which are not safe. Also add
a virIsSUID helper method for any other non-env var code
to use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit ae53e5d1)

The virConnectDomainXMLToNative API should require 'connect:write'
not 'connect:read', since it will trigger execution of the QEMU
binaries listed in the XML.

Also make virConnectDomainXMLFromNative API require a full
read-write connection and 'connect:write' permission. Although the
current impl doesn't trigger execution of QEMU, we should not
rely on that impl detail from an API permissioning POV.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 57687fd6)

Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 9712c251)

Introduced by commit 3f029fb5 the RPM build
was broken due to a missing LXC textcase.
Signed-off-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
(cherry picked from commit 6285c17f)

Introduced by 1fa7946f.

https://bugzilla.redhat.com/show_bug.cgi?id=1019023
(cherry picked from commit 15fac93b)

Since 76b644c3 when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>

This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.

The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.

This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.

Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.

Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
(cherry picked from commit 3f029fb5)

After successful @cmd construction the memory where @keys points to is
part of @cmd. Avoid double freeing it.
(cherry picked from commit 3e8343e1)

After freeing the bitmap pointer, it must set the pointer to NULL.
This will avoid any other use of the freed memory of the bitmap pointer.

https://bugzilla.redhat.com/show_bug.cgi?id=1006710Signed-off-by: NLiuji (Jeremy) <jeremy.liu@huawei.com>
(cherry picked from commit ef5d51d4)

https://bugzilla.redhat.com/show_bug.cgi?id=1008619

1,003 bytes in 1 blocks are definitely lost in loss record 599 of 635
==404== by 0x50728A7: virBufferAddChar (virbuffer.c:185)
==404== by 0x50BC466: virSystemdEscapeName (virsystemd.c:67)
==404== by 0x50BC6B2: virSystemdMakeSliceName (virsystemd.c:108)
==404== by 0x50BC870: virSystemdCreateMachine (virsystemd.c:169)
==404== by 0x5078267: virCgroupNewMachine (vircgroup.c:1498)
(cherry picked from commit 09b48562)

https://bugzilla.redhat.com/show_bug.cgi?id=1006864

Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.
(cherry picked from commit f084caae)

Commit 27e81517 set the payload size to 256 KB, which is
actually the max packet size, including the size of the header.

Reduce this by VIR_NET_MESSAGE_HEADER_MAX (24) and set
VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX to 262120, which was the original
value before increasing the limit in commit eb635de1.

(cherry picked from commit 609eb987)

The libvirtd server pushes data out to clients. It does not
know what protocol version the client might have, so must be
conservative and use the old payload limits. ie send no more
than 256kb of data per packet.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 27e81517)