This way both Domain and Device PostParse functions can act based on the
flags.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We weren't checking for failure of qemuCaps lookup

Rather than open coding calls. I can't see any reason not to

Rather than open coding calls. I can't see any reason not to

Should be a no-op

memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It was added by mistake before the 'If' by commit 71408079.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML.  Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start.  So let's forget about old generated paths
and also stop putting them into the persistent definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1278068Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

MemLock is already used in other modules and, while still an
abbreviation, is not ambiguous.

When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.

When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.

This function detects whether a domain needs RLIMIT_MEMLOCK
to be set, and if so, uses an appropriate value.

Instead of directly accessing the array add a helper to do this.

Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.

We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d82
and 65686e5a this was removed.

As in commit 88dc7e0c, the helper can be used in cases where the
function actually does not access anyting in the private data besides
the agent.

The current virtlogd RPC protocol provides the ability to
handle log files associated with QEMU stdout/err. The log
protocol messages take the virt driver, domain name and
use that to form a log file path. This is quite restrictive
as it prevents us re-using the same RPC protocol messages
for logging to char device backends where the filename
can be arbitrarily user specified. It is also bad because
it means we have 2 separate locations which have to decide
on logfile name.

This change alters the RPC protocol so that we pass the
desired log file path along when opening the log file
initially. Now the virt driver is exclusively in charge
of deciding the log filename
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemuDomainLogContextNew method leaks the "logfile" path
on the non-virtlogd code path.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576

Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.

This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the QEMU monitor is given an FD to the logfile. This
won't work in the future with virtlogd, so it needs to use the
qemuDomainLogContextPtr instead, but it shouldn't directly
access that object either. So define a callback that the
monitor can use for reporting errors from the log file.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemuDomainTaint APIs currently expect to be passed a log file
descriptor. Change them to instead use a qemuDomainLogContextPtr
to hide the implementation details.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the places which create/open log files to use the new
qemuDomainLogContextPtr object instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a qemuDomainLogContext object to encapsulate
handling of I/O to/from the domain log file. This will
hide details of the log file implementation from the
rest of the driver, making it easier to introduce
support for virtlogd later.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are two pretty similar functions qemuProcessReadLog and
qemuProcessReadChildErrors. Both read from the QEMU log file
and try to strip out libvirt messages. The latter then reports
an error, while the former lets the callers report an error.

Re-write qemuProcessReadLog so that it uses a single read
into a dynamically allocated buffer. Then introduce a new
qemuProcessReportLogError that calls qemuProcessReadLog
and reports an error.

Convert all callers to use qemuProcessReportLogError.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.

Panic device type used depends on 'model' attribute.

If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.

XML:
<devices>
  <panic model='hyperv'/>
</devices>

QEMU command line:
qemu -cpu <cpu_model>,hv_crash

like I440FX by moving the condition into qemuDomainMachineHasBuiltinIDE
and adding more machines.

Reference: http://bugs.debian.org/805189

Unlike other architectures, ppc64 domains need to lock memory
even when VFIO is not used.

Change qemuDomainRequiresMlock() to reflect this fact.

The amount of memory a ppc64 domain might need to lock is different
than that of a equally-sized x86 domain, so we need to check the
domain's architecture and act accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273480

We only started an async job for incoming migration from another host.
When we were starting a domain from scratch or restoring from a saved
state (migration from file) we didn't set any async job. Let's introduce
a new QEMU_ASYNC_JOB_START for these cases.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

ppc64 guests don't require adding a NUMA node for hotplug memory to
work. Lift the requirement and add test cases.

Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.

Aggregate the checks of the dimm device into the verification function
rather than having them in the formatter.

Add a function that will aggregate various checks related to memory
hotplug so that they aren't scattered accross various parts of the
code.

Based on Alex's explanation [1] in the recent discussion let's update
the comment explaining the memory lock limit calculation.

[1]
http://www.redhat.com/archives/libvir-list/2015-November/msg00329.html

Break early when hard limit is set so that it's not intermixed by other
logic for determining the limit.

Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If mlock is required either due to use of VFIO hostdevs or due to the
fact that it's enabled it needs to be tweaked prior to adding new memory
or after removing a module. Add a helper to determine when it's
necessary and reuse it both on hotplug and hotunplug.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491

New function qemuDomainGetMlockLimitBytes will now handle the
calculation so that it unifies the logic to one place and allows later
reuse.

We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: NIshmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>