We have to use VIR_WARNINGS_NO_CAST_ALIGN to avoid clang warning
about increased required alignment caused by some netlink macros.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Set the eventID for remoteRelayDomainQemuMonitorEvent explicitly to an
invalid value. Although the value is not used by
remoteRelayDomainQemuMonitorEvent, but it might be less prone to
errors for further refactorings.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Use stream->prog instead of a hard-coded "remoteProgram" since at
stream creation in daemonCreateClientStream "remoteProgram" is used
so we should use that especially since these functions are intended
as generic helpers for streams.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Remove unneeded global variables and convert them into local variables
where they're needed.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

In case of an error do the cleanup of the private data of the
connection.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Refactor testConnectClose as it's then obvious that conn->privateData
is set to NULL in all cases. In addition, 'testConnectCloseInternal'
can be better reused.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Rename the variable @defaultConn to @defaultPrivconn as it doesn't
point to a default connection but to the private data used for the
shared default connection of the test driver.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Set privateData to NULL also for a connection that uses @defaultConn
as privateData regardless of whether @defaultConn was freed or
not. @defaultConn is shared between multiple connections and it's
ensured that there will be no memory leak by counting references.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The two code paths have some cleanup in common so lets refactor it.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add typedef for the anonymous enum used for the driver features. This
allows the usage of the type in a switch statement and taking
advantage of the compilers feature to detect uncovered cases.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Make the output more readable.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '477502de' altered the entry to add one too many closing
parenthesis ')' and that propagated into commit id '9176b42b'.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This deals with cls.version possibly being None.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

We use text operations on the contents after reading them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The keys() method no longer returns a list, so converting the
return value would be necessary before calling sort() on it;
alternatively, we can just call sorted(), which returns a
sorted list.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

For list concatenation to work, the value returned by the
keys() method must be converted to a list first.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

All of these have been replaced with methods.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This replaces uses of the has_key() method.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This replaces the `` built-in.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

It has replaced the 'print' statement.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

It's already being dragged in by Python.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Commit ce7ae55e introduced a typo in virtlockd-admin socket file

/usr/lib/systemd/system/virtlockd-admin.socket:7: Unknown lvalue
'Server' in section 'Socket'

Change 'Server' to 'Service'.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The 'brew upgrade' command is pulling in the python2 package which
promptly fails due to clashing symlinks installed by the new python
package (which is python3 based):

==> Pouring python@2-2.7.14_3.sierra.bottle.tar.gz
Error: The `brew link` step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink bin/2to3-2
Target /usr/local/bin/2to3-2
is a symlink belonging to python. You can unlink it:
  brew unlink python
To force the link and overwrite all conflicting files:
  brew link --overwrite python@2
To list all files that would be deleted:
  brew link --overwrite --dry-run python@2

By running 'brew unlink python' we can get rid of the python3 links that
we didn't want in the first place and avoid this error.

This is the working fix for what we previously attempted todo in:

  commit c9c9fc90
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Mon Mar 5 10:13:12 2018 +0000

    travis: force install of python2 into $PATH on macOS
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The list of commands we're running for the before_install task
is rather large. We have it all on one line because we're
wrapping it all in a test against TRAVIS_OS_NAME env variable.

By moving it into the osx matrix entry we can remove the need
for the conditional shell test. This lets us put each command
on a separate line making the steps clear to understand.

Fortunately the 'before_install' task does not have the crazy
behaviour whereby travis ignores errors and runs all commands
regardless, like the 'script' task does. The first command
failing will cause an immediate stop with error status.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

And at the same time, do that from .c rather than .h file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: Chen Hanxiao<chenhanxiao@gmail.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The setuid-rpc-client.la is intended to be small and contain only
bare minimum of source files. virarptable.c is not one of them.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: Chen Hanxiao<chenhanxiao@gmail.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

As of 2499d1a0 we don't link against libpolkit anymore, so
we only need the polkit package to be available during build.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>