To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.

* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
  Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

Ad pointed out by Dan Berrange:
So if some thread in libvirtd is currently executing a logging call,
while another thread calls virExec(), that other thread no longer
exists in the child, but its lock is never released. So when the
child then does virLogReset() it deadlocks.

The only way I see to address this, is for the parent process to call
virLogLock(), immediately before fork(), and then virLogUnlock()
afterwards in both parent & child. This will ensure that no other
thread
can be holding the lock across fork().

* src/util/logging.[ch] src/libvirt_private.syms: export virLogLock() and
  virLogUnlock()
* src/util/util.c: lock just before forking and unlock just after - in
  both parent and child.

* src/util/logging.c (virLogMessage): Include "ignore-value.h".
Use it to ignore the return value of safewrite.
Use STDERR_FILENO, rather than "2".
* bootstrap (modules): Add ignore-value.
* gnulib: Update to latest, for ignore-value that is now LGPLv2+.

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
  src/lxc/lxc_controller.c src/node_device/node_device_hal.c
  src/openvz/openvz_conf.c src/qemu/qemu_driver.c
  src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
  src/storage/storage_backend_disk.c src/storage/storage_driver.c
  src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
  src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
  review and those are the fixes correcting the problems

When configuring logging settings, keep more information about the
output destination. Add accessors to retrieve the filter and output
settings in the original string form; this to be used to set up
environment for a child process that also logs.

* src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs
  accessors and modify the internals (including virLogDefineOutput())
  to save the data needed for the accessors

* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags

* src/logging.c: Fix buffer offset in logging read

* src/logging.c src/logging.h src/libvirt_private.syms:
  define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
  unified functions

* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't
  convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS
  and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise
  they can override a valid setting from the config file. Send all
  settings through the parser functions for validation, so that the
  existence of a bad setting doesn't nullify a good setting that should
  have applied -- particularly the default output. Keep the order of
  precedence consistent for all variables between the environment and
  the config file.  Warn when an invalid log level, filter, or output
  is ignored.
* src/libvirt_private.syms: export internally a few convenience functions

* src/libvirt.c src/logging.c: Don't convert high priority levels to the
  debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
  when they're set to the empty string. Warn when the user specifies an
  invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings

by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.

* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c
  src/logging.[ch]: cleanup the logging code and docs to remove
  all references to log level 0, cleanup hardcoded values and add
  a default VIR_LOG_DEFAULT value, patch by Amy Griffis
daniel

* src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
  src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
  the debug configuration option and code by Amy Griffis
daniel

daniel

  with function name and line number
daniel

* src/logging.h src/logging.c: add the infrastructure and internal
  APIs for logging, some of those APIs should be made public later
* src/libvirt_sym.version.in: flag the internal APIs as such
daniel

* src/logging.c src/logging.h proxy/Makefile.am proxy/libvirt_proxy.c
  src/Makefile.am src/cgroup.c src/datatypes.c src/domain_event.c
  src/internal.h src/libvirt.c src/lxc_container.c src/lxc_controller.c
  src/lxc_driver.c src/proxy_internal.c src/qemu_driver.c
  src/remote_internal.c src/storage_backend_disk.c src/util.c
  src/veth.c src/xen_internal.c src/xen_unified.c src/xend_internal.c:
  add new logging module, and move existing definitions there
Daniel

Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'

	* src/console.c, src/console.h, src/virsh.c: Disable
	  text console on Windows.
	* src/libvirt.c: Use replacement getpass from Gnulib.
	* src/libvirt.c: Initialize Winsock before use.
	* src/remote_internal.c: Header file fixes for Windows.
	  Don't fail if AI_ADDRCONFIG isn't defined.  Disable
	  unsupported stuff under Windows.
	* src/uuid.c: ENODATA unavailable on Windows, use EIO instead.
	* src/virsh.c: No uid_t / getuid on Windows.
	* src/virsh.c: No O_SYNC on Windows.

  include/libvirt/virterror.h python/generator.py python/libvir.c
  python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
  src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
  src/xml.c src/xml.h: moved the includes from include/ to
  include/libvirt to reflect the installed include tree. This
  avoid using "" in the includes themselves.
Daniel