Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit 0e0149ce.

That commit was added to comply with systemd rules that were changed in
the meantime, so this patch is pointless.

Do not store the return value of virDomainParseScaledValue,
it was overwritten anyway.

Delete the cleanup label, there is nothing to clean up.

Free the old vcpupids array in case when this function is called again
during the run of the VM. It will be later reused in the vCPU hotplug
code. The function now returns the number of detected VCPUs.

Future patches will tweak and reuse the function in different places so
move it separately first.

Avoid using virDomainDefSetVcpus when we can set it directly in the
structure.

In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.

Use 'ret' for return variable name, clarify use of 'param_idx' and avoid
unnecessary 'success' label. No functional changes. Also document the
function.

Since commit 71408079 we are generating
socket path later than before -- when starting a domain.  That makes one
particular inconsistent state of a chardev, which was not possible
before, currently valid.  However, SELinux security driver forgot to
guard the main restoring function by a check for NULL-paths.  So make it
no-op for NULL paths, as in the DAC driver.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300532Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.

Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)

Let's use different variable to hold restore result.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Rather than a loop reallocating space to build the regex, just allocate
it once up front, then if there's more than 1 nextent, append a comma and
another regex_unit string.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The 'stripes' value is described as the "Number of stripes or mirrors in
a logical volume". So add "mirror" and anything that starts with "raid"
to the list of segtypes that can have an 'nextents' value greater than one.
Use of raid segtypes (raid1, raid4, raid5*, raid6*, and raid10) is favored
over mirror in more recent lvm code.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Some lines in this file are misaligned which fires up my OCD.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.

This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.

A future patch would then be able to avoid the code more cleanly
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.

Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.

This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.

It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.

rbd_open_read_only() is available in all librbd versions which
also support rbd_open().
Signed-off-by: NWido den Hollander <wido@widodh.nl>

RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.

The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.

If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.

rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.

It will use the same features, strip size and stripe count as the parent image.

This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.

During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().

The latter is faster, but only available on Ceph versions after 0.94 (Hammer).

Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.

If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()

Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.

Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.

rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.

This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.

It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).

Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.

Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.

This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The affected functions are:

  virPCIDeviceGetManaged()
  virPCIDeviceGetUnbindFromStub()
  virPCIDeviceGetRemoveSlot()
  virPCIDeviceGetReprobe()

Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.
Suggested-by: NJohn Ferlan <jferlan@redhat.com>

In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Unbinding a PCI device from the stub driver can require several steps,
and it can be useful for debugging to be able to trace which of these
steps are performed and which are skipped for each device.

The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.

This should be the last offender.

It's disallowed in the API.

They are disallowed in the pinning API and as default cpuset.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1293241

Iterate over all cpus skipping inactive ones.

Commit 871e10fc fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.
Suggested-by: NMichal Privoznik <mprivozn@redhat.com>

In 370608b4 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted.  To reproduce:

ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system

Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***

The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.

The fix: Only overwrite the newline if the string is not empty.
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>

This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.

When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.

Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.

In the following cases nl_recv() was returning the error "No buffer
space available":

* When switching CPUs to offline/online in a system more than 128 cpus
* When using virsh to destroy domain in a system with many interfaces

This patch sets the buffer size for all netlink sockets created by
libnl to 128K and turns on message peeking for nl_recv(). This
eliminates the "No buffer space available" errors seen in the cases
above, and also preempts other future errors the smaller buffers could
have caused.
Signed-off-by: NLeno Hou <houqy@linux.vnet.ibm.com>
Signed-off-by: NLaine Stump <laine@laine.org>

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>