We currently generate two completely separate API references for the
libvirt public API. One at 'docs/html/' and one at 'docs/devhelp/'.
Both are published on the website, but we only link to content in
the 'docs/html/' pages.

Both are installed in the libvirt-docs sub-RPM, with a full copy
of the website including 'docs/html/' in /usr/share/docs/libvirt-docs,
while the 'docs/devhelp/' content goes to /usr/share/gtk-doc/. The
latter was broken for years until:

  commit ca6f6025
  Author: Andrea Bolognani <abologna@redhat.com>
  Date:   Fri May 10 14:54:52 2019 +0200

    docs: Introduce $(devhelphtml_generated)

    Our XSLT magic generates one Devhelp-compatible HTML file
    per documentation module, but so far we have only shipped
    and installed documentation for virterror.

    Now that we have $(modules), however, we can generate the
    list of files the same way we do for regular documentation
    and make sure we always ship and install everything.

That this bug went unnoticed for so long is a sign of how few
people are using the devhelp docs. The only commits to the devhelp
code since it was first introduced have been fixing various build
problems that hit.

The only obvious difference between the two sets of docs is the CSS
styling in use. Overall devhelp does not look compelling enough to
justify having two duplicated sets of API docs. Eliminating it will
reduce the amount of XSL code we are carrying in the tree which is
an attractive benefit.
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time.  We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.

Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint.  This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints).  We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.

The following map shows the API relations to snapshots, with new APIs
on the right:

Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML          virDomainCheckpointCreateXML

Operate on a child object for lifetime management:
virDomainSnapshotDelete             virDomainCheckpointDelete
virDomainSnapshotFree               virDomainCheckpointFree
virDomainSnapshotRef                virDomainCheckpointRef

Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc         virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect         virDomainCheckpointGetConnect
virDomainSnapshotGetDomain          virDomainCheckpointGetDomain
virDomainSnapshotGetName            virDomainCheckpiontGetName
virDomainSnapshotGetParent          virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata        (deferred for later)
virDomainSnapshotIsCurrent          (no counterpart, see note above)

Operate on a domain object to list all children:
virDomainSnapshotNum                (no counterparts, these are the old
virDomainSnapshotListNames           racy interfaces)
virDomainSnapshotListAllSnapshots   virDomainListAllCheckpoints

Operate on a child object to list descendents:
virDomainSnapshotNumChildren        (no counterparts, these are the old
virDomainSnapshotListChildrenNames   racy interfaces)
virDomainSnapshotListAllChildren    virDomainCheckpointListAllChildren

Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName       virDomainCheckpointLookupByName
virDomainSnapshotCurrent            (no counterpart, see note above)
virDomainHasCurrentSnapshot         (no counterpart, old racy interface)

Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert             (no counterpart, instead checkpoints
                                     are used in incremental backups via
				     XML to virDomainBackupBegin)
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Set a default namespace in the stylesheet instead.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The previously added AMD SEV doc was not linked from anywhere on the
website. Address this by introducing a new "Knowledge base" section
that can hold task oriented guide to various features. Moving the SEV,
disk locking and secure usage guides under this section.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

At the moment we allow the user to specify exactly where
they want the HTML documentation to be installed with an
extreme level of precision through the --with-html-dir and
--with-html-subdir configure options.

Most of the time, of course, the user will stick with the
default, that is $(datadir)/doc/$(PACKAGE)-$(VERSION)/html.

So close to $(docdir)! Including the version number in
the path, specifically, seems entirely unnecessary since
different releases of libvirt are not going to be able to
coexist on the same system anyway.

Drop all these custom flexibilty for flexibilty's sake
shenaningans in favor of the standard, well understood
$(docdir).
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.

Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

This variable contains a lists of documentation modules,
in a neutral format.

Right now is only used to define $(apihtml_generated), but
later on we're gonna reuse it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of duplicating javascript in every single page, put it in a
standalone file which can be cached by the browser.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

libvirt.org/search.php drops into some kind of screen which I guess
is supposed to show a search bar with options, but presently for me
renders as nothing but the following text:

Search the documentation on Libvirt.org

The search service indexes the libvirt APIs and documentation as well as the libvir-list@redhat.com mailing-list archives. To use it simply provide a set of keywords:

The main page search bar now redirects to google, this page is broken,
I say we just remove it and move on.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Now that they are not linked any more remove them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The website does not look good in a mobile device as the text is
far too small and the layout assumes a wide screen.

Make the style dynamically adapt based on viewport size, so a
mobile device gets a layout more suited to its dimensions,
also changing "Learn" to "Docs"
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit id '94d2d642' caused a syntax-error check to fail:

docs/Makefile.am:276:	$(AM_V_GEN)sed -e '/<span id="php_placeholder"><\/span>/r '"$(srcdir)/$@.code.in" \
maint.mk: Wrap long lines in Makefiles
cfg.mk:721: recipe for target 'sc_prohibit_long_lines' failed
make: *** [sc_prohibit_long_lines] Error 1
make: *** Waiting for unfinished jobs....

Altered the line to put another line wrap between sed and -e

We already require libxml to be installed, so it is not unreasonable
to require xmllint and xsltproc to be installed too - any platform
with the former will have the latter too.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.

There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

I just forgot '-u' in a54c9622.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In order not to make the build even less reproducible, honour
SOURCE_DATE_EPOCH environment variable as specified:

  https://reproducible-builds.org/specs/source-date-epoch/Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Despite being a generated file, HACKING has been tracked in
the git repository along with actual source files. As far as
I'm aware, it's the only generated file for which that happens.

Times and times again, people[1] have committed changes to
the source file without refreshing the generated copy at the
same time.

The rationale for tracking the generated file is to help out
people who just cloned the git repository looking to contribue;
however, README-hacking already contains enough information to
get perspective contributors to a place where they can simply
look at docs/hacking.html instead.

[1] Mostly me, to be honest
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Currently, building the NEWS file involves using a XSLT stylesheet
to extract information from the same HTML file that's used on the
libvirt website.

The process works, but it's quite fiddly in that it requires the
source HTML to be formatted in a very precise way, and a single
missing newline can mess up the resulting plain text considerably.

Moreover, the XSLT stylesheet itself encodes a lot of the details
of converting to plain text in a way that's not necessarily easy
to understand, tweak or fix.

To improve the process, move all existing entries to a new XML
file that contains exactly the information we care about in a
simple structured format, and start generating both the HTML and
plain text versions of the release notes using XSLT stylesheets
that can now afford to be almost trivial.

When changing one of the src/libvirt-*.c files to alter the docs, the
adjusted files weren't being built.  Added them into APIBUILD_STAMP and
then added that to the html/index.html rule which is used for the
$(apihtml_generated) generated rule.

Also, for clean we can remove the html/*.html files

Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The todo page used to be auto-generated from bugzilla but is
no longer used.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the old "Made with libvirt" logo with links to the
new "Libvirt powered" logos, providing various sizes.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a large logo banner across the front page. Tile the
three lists of links into three panels
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a dark banner whose color matches the dark green used in
the logo. Introduce a newly rendered version of the header
logo derived from new SVG file, instead of old one from
(now lost) Adobe Illustrator file.

The top banner logo now links to the front page as is common
practice for most websites.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add the SVG files for the libvirt logo, along with corresponding
pre-rendered PNG bitmaps at key sizes. Also add a README file
describing how to modify the logos and their intended usages.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This file requires three steps instead of two.
Move it earlier in the list of targets to avoid waiting for it.

Remove DOC_SOURCE_DIR, introduced by and
unused since commit b325d741.

PERL is already detected in configure.ac.

So, I've ran into very interesting problem lately. When doing the
following, I've encountered an error:

  libvirt.git $ make dist && tar -xJf libvirt-2.2.0.tar.xz && \
                cd libvirt-2.2.0 && ./configure && \
                rm docs/formatdomain.html && make -C docs

  make: Entering directory 'docs'
  make: *** No rule to make target 'formatdomain.html', needed by 'web'.  Stop.
  make: Leaving directory 'docs'

I had no idea what was going on, so I've nailed down the commit
that "broke it" via running git-bisect. It was this one:
7659bd92. But that shed no more light until I realized
that the commit might actually just exposed a problem we had. And
guess what - I've nailed it down. Of course we are not
distributing subsite.xsl that's why make prints error message.
Very misleading one I must say.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since commit d195cffa, both $(srcdir) and $(abs_builddir)
are passed to the apibuild.py script; however, since the
former is a relative path and the latter an absolute one, the
script might not be able to detect whether they point to the
same location.

Pass both as relative paths to avoid the issue.

libvirt-common.h is generated into builddir/include/libvirt. apibuild.py
only operated on srcdir/inlcude/libvirt. With VPATH build
srcdir/docs/libvirt-libvirt-common.html would not get generated and make
RPM failed.

Since commit f5d9c5d0 moved the virTypedParam stuff into
libvirt-common we did not generate any docs for them and neither did we
populate them into libvirt-api.xml. This broke the sanity check in
libvirt python. Fix it by generating docs for libvirt-common.h too.

Our uninstall script is not exact counterpart of install one.
Therefore we are leaving couple of files behind. This should not
happen.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While we could leave it behind as an indelible sign that libvirt
has been running on host, other users might not be that fond of
it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>