Add a simple virsh command handler which makes use of the new API.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Add a simple virsh command handler which makes use of the new API.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Add a simple virsh command handler which makes use of the new API.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

This commit adds qemu driver implementation to edit xml
configuration of managed save state file of a domain.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

This commit adds qemu driver implementation to get xml description
for managed save state domain.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1476866

For some reason, we completely ignore <on_reboot/> setting for
domains. The implementation is simply not there. It never was.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This API is definitely modifying state of @vm. Therefore it
should grab a job.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We can now check for the error and not care about the return value as
it will be properly handled in virBufferContentAndReset() anyway.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The function is useful even without using the return value.  And if
needed, the return value can be obtained by other calls as well.  The
potential for clean-up can be seen in the following patch.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Otherwise longer domain names might generate paths that are too long
to be created.  This follows what other parts of the code do as well.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453194Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We always truncated the name at 20 bytes instead of characters.  In
case 20 bytes were in the middle of a multi-byte character, then the
string became invalid and various parts of the code would error
out (e.g. XML parsing of that string).  Let's instead properly
truncate it after 20 characters instead.

We cannot test this in our test suite because we would need to know
what locales are installed on the system where the tests are ran and
if there is supported one (most probably there will be, but we cannot
be 100% sure), we could initialize gettext in qemuxml2argvtest, but
there would still be a chance of getting two different (both valid,
though) results.

In order to test this it is enough to start a machine with a name for
which trimming it after 20 bytes would create invalid sequence (e.g.
1234567890123456789č where č is any multi-byte character).  Then start
the domain and restart libvirtd.  The domain would disappear because
such illegal sequence will not go through the XML parser.  And that's
not a bug of the parser, it should not be in the XML in the first
place, but since we don't use any sophisticated formatter, just
mash some strings together, the formatting succeeds.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1448766Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436042Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449712Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The reconnect attribute for chardev devices in QEMU is used to
configure the reconnect timeout in seconds.  Setting '0' value disables
the reconnect functionality thus we don't allow to set '0' for QEMU.
To disable the reconnect user should use <reconnect enabled='no'/>.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1254971Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Rather than an int, it returns a bool - so let's define it that way
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit 92840eb3.

More recent reviews/changes don't have the vir*ObjNew APIs
consuming the @def, so remove from Interface as well. Changes
needed to also deal with conflicts from commit id '46f5eca4'.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

3 out of 4 uses of gl_WARN_ADD() were incorrectly adding "" around
the argument, which in turn resulted in the argument being used
unquoted (configure had gl_positive=""-fstack-protector-all"",
rather than the intended gl_positive="-fstack-protector-all").
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Commit 94c465d0 refactored the logging setup phase but introduced an
issue, where the daemon ignores verbose mode when there are no outputs
defined and the default must be used. The problem is that the default
output was determined too early, thus ignoring the potential '--verbose'
option taking effect. This patch postpones the creation of the default
output to the very last moment when nothing else can change. Since the
default output is only created during the init phase, it's safe to leave
the pointer as NULL for a while, but it will be set eventually, thus not
affecting runtime.
Patch also adjusts both the other daemons.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442947Signed-off-by: NErik Skultety <eskultet@redhat.com>

We can't retrieve the isolation group of a device that's not present
in the system. However, it's very common for VFs to be created late
in the boot, so they might not be present yet when libvirtd starts,
which would cause the guests using them to disappear.

Moreover, for other architectures and even ppc64 before isolation
groups were introduced, it's considered perfectly fine to configure a
guest to use a device that's not yet (or no longer) available to the
host, with the obvious caveat that such a guest won't be able to
start before the device is available.

In order to be consistent, when a device's isolation group can't be
determined fall back to not isolating it rather than erroring out or,
worse, making the guest disappear.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1484254Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element.  This is not extendable.

Use the new virXMLFormatElement() to properly format the source
element with possible child elements.

As a side effect it fixes a bug in disk source formatting.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This helper allows you to better structurize the code if some element
may or may not contains attributes and/or child elements.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This pulls in, among other new things, vc-list-files fix to make
syntax-check work with git worktrees.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

And into DeviceDefValidate which is the expected place
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The ram/vram = 0 bits aren't needed, and PostParse will fill in the
needed QXL default
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Both of these are dead code: qemu_command.c explicitly rejects
VIRT_XEN earlier in the call chain, and qemu_parse_command.c
will never set VIRT_XEN anymore
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>