- 25 4月, 2016 8 次提交
-
-
由 Andrea Bolognani 提交于
No file should be created inside $(srcdir) during build.
-
由 Andrea Bolognani 提交于
Instead of embedding the pod information inside the respective source files, store them in separate files. This allows us to reduce the number of custom build rules as most of the information can be inferred for the file name; moreover, text editors are more likely to use proper syntax highlighting for standalone pod files.
-
由 Andrea Bolognani 提交于
This is the source file for the virt-admin(1) manual page, so it should be shipped.
-
由 Peter Krempa 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329819
-
由 Martin Kletzander 提交于
QEMU_BLOCK_IOTUNE_MAX is the maximum inclusively, so let's modify the message so it makes sense. https://bugzilla.redhat.com/show_bug.cgi?id=1329041Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Andrea Bolognani 提交于
When describing attributes and elements, we mostly stick to a certain pattern; however, there are a few cases when the information is not presented in the usual way. Since there doesn't seem to be any reason not to follow the tried and true formula, rework those bits to fit the rest of the documentation.
-
由 Andrea Bolognani 提交于
Commit 61b070cf cleaned up a number of cases where the <dt> element was used to document symbols, but the symbol itself was not inside a <code> element. To make sure we don't end up having to clean up again a few months from now, introduce a syntax-check rule that can spot such mistakes. All existing exceptions are marked as such, with either file or line granularity depending on the case.
-
由 Peter Krempa 提交于
libvirt-common.h is generated into builddir/include/libvirt. apibuild.py only operated on srcdir/inlcude/libvirt. With VPATH build srcdir/docs/libvirt-libvirt-common.html would not get generated and make RPM failed.
-
- 24 4月, 2016 3 次提交
-
-
由 Cole Robinson 提交于
This unifies the test scripts to all use the similar pattern added for schematests in ace4aecd. This gives the following - Enables running all tests from outside of tests/ dir - Drops redundant abs_* definitions, which are set by test-lib.sh - Drops unnecessary srcdir variable which was only used for sourcing test-lib.sh Behavior changes: - srcdir can no longer be overwritten, but I don't know why anyone would really need to... - Script VERBOSE setting no longer prints commands executed by test-lib.sh. if anyone cares I suggest handling this in test-lib.sh which already has other verbose style handling
-
由 Cole Robinson 提交于
We presently don't give any indication if the VirtualBox version isn't in our support whitelist.
-
由 Cole Robinson 提交于
These old tests expect to run against a real xen connection via xend running on the host. Our intentions for the test suite are that it doesn't require interacting with any specific host resources, so these don't really belong here.
-
- 23 4月, 2016 1 次提交
-
-
由 Laine Stump 提交于
This finishes the job started by commit 81f3839f - removing the erroneous reference to nonexistent "igmp-ipv6" protocol.
-
- 22 4月, 2016 10 次提交
-
-
由 John Ferlan 提交于
Add bolding for <dt><code> elements to make them "stick out" on the page rather that just a stream of text where the elements only differ by slightly different font style.
-
由 Andrea Bolognani 提交于
Most of the time, the <dt> tag is used when providing documentation for a symbol; enclose symbols in <code> tags to style them appropriately.
-
由 Peter Krempa 提交于
Ancient python didn't like the new list added in 99283874. Convert it to a dict.
-
由 Martin Kletzander 提交于
The values are currently limited to LLONG_MAX which causes some problems. QEMU conveniently changed their maximum to 1e15 (1 PB) which is enough for some time and we need to adapt to that so that we don't throw "Unknown error" messages. Strictly limiting these values actually fixes some corner case values (off-by-one checks in QEMU probably). Since values out of the new specified range do not overflow anything, change the type of error as well. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Cole Robinson 提交于
And confdata to virconfdata, since 'conf' can mean a few different things in libvirt
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
Store the test list in libvirtd_test_scripts, and use it where appropriate. This also fixes the fact that we didn't ship virsh-uriprecedence when libvirtd build is disabled.
-
由 Cole Robinson 提交于
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf $ libvirtd --timeout=10 2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org) 2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf Rather than try to fix this in the depths of the parser, just catch the case when a config file doesn't end in a newline, and manually append a newline to the content before parsing https://bugzilla.redhat.com/show_bug.cgi?id=1151409
-
由 Laine Stump 提交于
IGMP is used on IPv4 networks tp setup multicast group memberships. On IPv6, this job is done by Multicast Listener Discovery (MLD), which uses ICMPv6 packets rather than its own IP protocol number like IGMP. The nwfilter documentation lists "igmp-ipv6" as one of the possible protocols, but this is ignored (and stripped from the xml). This patch removes that erroneous reference. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1038888
-
由 Laine Stump 提交于
According to the dnsmasq manpage, the netmask for IPv4 address ranges will be auto-deteremined from the interface dnsmasq is listening on, but it can't do this for IPv6 for some reason - it instead assumes a network prefix of 64 for all IPv6 address ranges. If this is incorrect, dnsmasq will refuse to give out an address to clients, instead logging this message: dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0 The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range arguments when building the dnsmasq.conf file. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
-
- 21 4月, 2016 18 次提交
-
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Additionally avoid initializing it after being calloced.
-
由 Peter Krempa 提交于
Additionally switch to using a common temp variable for the xml elements.
-
由 Peter Krempa 提交于
Use a single temporary variable instead shortening the code.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Rather than checking individual fields in dubious places extract them to a central point.
-
由 Andrea Bolognani 提交于
FreeBSD's sed(1) doesn't support using "\n" to insert a newline, so the installed default.xml file ends up containing a literal "n" between tags; to work around this problem, add a tr(1) invocation as suggested by the sed FAQ[1]. [1] http://sed.sourceforge.net/sedfaq4.html (4.1 c)
-
由 Michal Privoznik 提交于
Usually, we have this 'if() goto cleanup;' pattern in our new code. It is going to be useful here too. Thing is, there was a memleak. If there has been an error in virNetServerProgramSendStreamError() or virNetServerProgramSendStreamData() created message was never freed. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
After 434de30d the status values are prefixed VIR_NET_ rather than REMOTE_. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
This structure item is used as pure boolean. There's no need to hold whole integer for it. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-