Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In previous commit:

  commit e6afacb0
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Wed Feb 12 12:26:11 2020 +0000

    qemu: start/stop an event loop thread for domains

A bogus comment was added claiming we didn't need to shutdown the
event thread in the qemuProcessStop method, because this would be
done in the monitor EOF callback. This was wrong because the EOF
callback only runs in the case of a QEMU crash or a guest initiated
clean shutdown & poweroff.  In the case where the libvirt admin
calls virDomainDestroy, the EOF callback never fires because we
have already unregistered the event callbacks. We must thus always
attempt to stop the event thread in qemuProcessStop.
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reported-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If the storage source has the query part set, format it in the output.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

http, https, ftp, ftps, and tftp were not mentioned in the
documentation. Note that 'ssh' is still omitted as it's used only
internally.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Since we are refreshing the relative paths when doing the blockjobs we
no longer need to load them upfront when doing the snapshot.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Preservation of the relative relationship requires us to load the
backing store strings from the disk images. With blockdev we stopped
detecting the backing chain if it's specified in the XML so the relative
links were not loaded at that point. To preserve the functionality from
the pre-blockdev without accessing the backing chain unnecessarily
during VM startup we must refresh the relative links when relative
block commit or block pull is requested.

https://bugzilla.redhat.com/show_bug.cgi?id=1818655Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Even with GLib it is still possible for virQEMUCapsNew() to
return NULL because it calls virQEMUCapsInitialize() which is a
wrapper over pthread_once() which may fail. At least, we still
check for its retval. If it so happens that the virQEMUCapsNew()
fails and returns NULL, we should not dereference it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The documentation could confuse people to expect that CPU models with
usable='no' attribute are not usable at all on the current host. But
they cannot be only used without explicitly disabling some features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This new template provides a standardized place where environment
variables which are not static, but rather depend on the output of
some shell command, can be defined for later use. This pattern is
already used in libosinfo's GitLab CI integration.

Defining $MAKEFLAGS there means we don't need to call getconf over
and over, and the actual build steps don't end up drowned in the
noise.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The aim was to break a long line, but it is not long anymore.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The last usage of plain fork() was removed in v0.9.7-rc1~50, but
we forgot to update the syntax-check exemption list accordingly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

If the DCO check is run on an empty branch (ie one which has no commits
different from master), it throws an error due to trying to interpret
the empty string as a git commit SHA.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.

https://bugzilla.redhat.com/show_bug.cgi?id=1804750Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The "only: branches" does not in fact exclude "master", so it must be
excluded explicitly.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Running the code style syntax-check as part of the build jobs leads to
all jobs failing in the same way. Have a prebuild job for validating
syntax-check to catch code style problems upfront and thus avoid needing
to run all the build jobs.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>a
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This introduces a CI job for validating DCO sign-off in every commit
message. The CI jobs are not provided any information on what the
baseline commit for the branch was. We can't compare against the forked
repo's master branch, as there's no guarantee the user is keeping master
up2date in their fork. Thus we add the master upstream repo as a git
remote and identify the common ancestor.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

For any given job there is a high likelihood that ccache will be able to
reuse previously built object files. This will result in faster build
pipelines in later updates.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Whenever there is a change to the translatable strings we need to push
a new libvirt.pot to weblate. This only needs to be done when code
merges into git master, so the job is restricted to that branch.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This patch adds x86_64 native CI jobs for all distros that we currently
build container images for. This is a superset of the Linux jobs run on
current Jenkins and Travis platforms.

The remaining missing platforms are FreeBSD and macOS, neither of which
can use the shared runner container based infrastructure.

We may add further native jobs in the future which are not x86_64 based,
if we get access to suitable hardware, thus the jobs all have an arch
prefix in their name, just like the cross-built jobs do.

As with the cross-arch builds, the native jobs are split into two
groups. One group is run in all situations, while the other group is
only run on the master branch, or branches with a name prefix
'ci-full-'. This avoids the build time getting too long when
developers are testing their code prior to submission, while keeping
full coverage of code that is merged.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This pulls in the mingw cross build jobs using Fedora 30 as a base,
matching what is done on Jenkins and Travis.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The pipeline UI will truncate the names of jobs after about 15
characters. As a result with the cross-builds, we truncate the
most important part of the job name. Putting the most important
part first is robust against truncation, and we can drop the
redundant "-cross" stub.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <skultety.erik@gmail.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently we have nine different cross build jobs, but as we introduce
more native jobs this is going to result in a very long CI execution
time. For developers testing their personal branches under development
it is generally sufficient to just look at a couple of interesting
scenarios, namely 32-bit and big endian.

This splits the cross build jobs so that by default only the armv7
and s390x archs are built. The remainining archs are setup so that they
are only built for code on the master branch, which will have the effect
of doing post-merge testing. Developers can opt-in to full testing of
their pre-merge code by pushing it to a branch with a name prefix of
"ci-full-".
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Run the bare minimum build that is possible to create the docs, avoiding
compiling code which other jobs will deal with.

The generated website is published as an artifact and thus is browsable
by developers on build completion and can be downloaded as a zip file.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

As we introduce more build jobs, it will be useful to have a grouping of
jobs to more easily visualize the results and potentially control build
ordering.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We don't need the full git history when running CI jobs. From a code POV
we only need the most recent commit, but we want to be able to run
checks on the commits too. In particular to validate the DCO signoff for
each commit.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

To facilitate future jobs that will use FreeBSD
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Commit 5540acb9 added a minimum size verification for the target
size of ppc64 NVDIMMs but forgot to remove a MAX() size check that
was being used in earlier reviews of that commit. The size
verification makes this check unneeded since we're making sure
that guestArea will always be at least equal to ppc64AlignSize.

Fixes: 5540acb9Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This is the only instance of g_autofree change applicable for
qemu_agent.c
Signed-off-by: NSeeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This fixes a FreeBSD build error from

  commit a11a0e6e
  Author: Rafael Fonseca <r4f4rfs@gmail.com>
  Date:   Tue Mar 24 17:14:30 2020 +0100

    bhyve: move video default logic to driver
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>