Libvirt only manages one PR daemon. This means that we don't need to
pass the 'disk' object and also rename the functions dealing with this
so that it's obvious we only deal with the managed PR daemon.

Signed-off-by: Peter Krempa <pkrempa@redhat st.com>

Rather than always checking which path to use pre-assign it when
preparing storage source.

This reduces the need to pass 'vm' around too much. For later use the
path can be retrieved from the status XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

To allow storing status information in the XML move the validation that
the 'path' is not valid for managed PR daemon case into
qemuDomainValidateStorageSource and allow parsing of the data even in
case when managed='yes'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The function now does not do anything useful. Replace it by the pointer
check.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.

Drop the attribute and adjust the code accordingly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Disk source definition should be validated in
qemuDomainValidateStorageSource rather than in individual generators of
command line arguments.

Change to the XML2XML test is required since now the definition is
actually validated at define time.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The comment did not accurately describe the arguments.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

For use with blockdev the PR manager will be bound to a virStorageSource
rather than a virDomainDiskDef, so we will need to use the correct
alias.

Allow passing a string rather than the whole disk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Extract out command line setup and run from storageBackendCreateQemuImg
as we'll need to run it twice soon.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Split up virStorageBackendCreateQemuImgCmdFromVol into two parts.
It's too long anyway and virStorageBackendCreateQemuImgCmdFromVol
should just handle the command line processing.

NB: Requires changing info.* into info->* references.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We're about to split up the code a bit more, so we'll need this
to be in the local struct.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The only way preallocate could be set is if the info->format was
not RAW (see storageBackendCreateQemuImgSetBacking), so let's just
extract it from the if/else surrounding the application of the
encryption options.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The only way backing_fmts could be set is if the info->format was
not RAW (see storageBackendCreateQemuImgSetBacking), so let's just
extract it from the if/else surrounding the application of the
encryption options.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove the "luks" distinction as the code is about to become more
generic and be able to support qcow encryption as well.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move generation of secretPath to storageBackendGenerateSecretData
and simplify a bit since we know vol->target.encryption is set plus
we have a local @enc.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than having storageBackendCreateQemuImgCheckEncryption
perform the virStorageGenerateQcowEncryption, let's just do that
earlier during storageBackendCreateQemuImg so that the check
helper is just a check helper rather doing something different
based on whether the format is qcow[2] or raw based encryption.

This fixes an issue in the storageBackendResizeQemuImg processing
for qcow encryption where if a secret was not available for a
volume, a new secret will not be generated and instead an error
message will be generated.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename to storageBackendCreateQemuImgOpts - which is what it's doing.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id 'a48c7141' altered the logic a bit and didn't
remove an unnecessary check as info.encryption is true when
vol->target.encryption != NULL, so if we enter the if segment
with info.format == VIR_STORAGE_FILE_RAW && vol->target.encryption
!= NULL, then there's no way info.encryption could be false.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove the != NULL checks, use !! for setting info.encryption.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Perform some code cleanup in areas that are about to be altered.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>

Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.

NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Create a function called `qemuBuildGraphicsSDLCommandLine` which is
called from qemuBuildGraphicsCommandLine.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It only accepts a virObjecLockable, not a virObjecRWLockable
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

libxlDoDomainSave() is used in both the save and managedsave code
paths but was unconditionally setting hasManagedSave to true on
success. As a result, undefine would fail after a non-managed
save/restore operation. E.g.

virsh define; virsh start
virsh save; virsh restore
virsh shutdown
virsh undefine
error: Refusing to undefine while domain managed save image exists

Modify libxlDoDomainSave() to take an additional parameter to
specify managed vs non-managed save, and change callers to use it.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

In a lot of our mocks (if not all of them) we use our internal
APIs (e.g. VIR_ALLOC). So far, we're relying on test binary that
links with the mock to drag in libvirt.so. Well, this works only
partially. Firstly, whatever binary we execute from tests will
fail (e.g. as Martin reported on the list ./qemucapsprobe fails
to execute qemu). Secondly, if there's a program that tries to
validate linking (like valgrind is doing) it fails because of
unresolved symbols.

Because of that we have to link our mocks with libvirt.so.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Parser assumed extra was always present when root was specified.
Fixed by handling root and extra separately.
Signed-off-by: NFilip Alac <filipalac@gmail.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Generates the QEMU command line for the vfio-ccw device.

Adds various functionality testing for vfio-ccw in libvirt:

1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.

Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add the function virHostdevIsMdevDevice() which detects whether a
hostdev is a mediated device or not. Also, replace all existing
conditionals.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.

Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.

Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.

The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.

Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Ditch the use of gnulib's digest functions in favor of GnuTLS,
which might be more likely to get FIPS-certified.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Do not rely on gnulib's MD5_DIGEST_SIZE from md5.h.

Include vircrypto.h and use VIR_CRYPTO_HASH_SIZE_MD5.
Signed-off-by: NJán Tomko <jtomko@redhat.com>