* src/openvz/openvz_driver.c (openvzDomainReboot, openvzOpen):
Reject unknown flags.

* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.

* src/libxl/libxl_driver.c (libxlOpen, libxlDomainReboot)
(libxlDomainXMLFromNative, libxlDomainXMLToNative)
(libxlDomainCreateWithFlags): Reject unknown flags.

Make the command 'virsh snapshot-delete' has the appropriate prompt
message when executing sucessful or failed.

While compiling on F15 build crashed (probably because of new GCC).

* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateQemuImg)
(virStorageBackendCreateQcowCreate): Reject unknown flags.
* src/storage/storage_backend_disk.c (virStorageBackendDiskBuildPool)
(virStorageBackendDiskDeleteVol): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSources)
(virStorageBackendFileSystemBuild)
(virStorageBackendFileSystemDelete, createFileDir)
(virStorageBackendFileSystemVolBuildFrom)
(virStorageBackendFileSystemVolDelete): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources)
(virStorageBackendLogicalBuildPool)
(virStorageBackendLogicalDeletePool)
(virStorageBackendLogicalDeleteVol): Likewise.
* src/storage/storage_driver.c (storageOpen, storagePoolCreate)
(storagePoolDefine, storagePoolRefresh, storagePoolGetXMLDesc)
(storageVolumeCreateXML, storageVolumeCreateXMLFrom)
(storageVolumeGetXMLDesc): Likewise.

* src/node_device/node_device_driver.c (nodeNumOfDevices)
(nodeListDevices, nodeDeviceGetXMLDesc, nodeDeviceCreateXML):
Reject unknown flags.
* src/node_device/node_device_hal.c (halNodeDrvOpen): Likewise.
* src/node_device/node_device_udev.c (udevNodeDrvOpen): Likewise.

Silently ignored flags get in the way of new features that
use those flags.  Also, an upcoming syntax check will favor
unsigned flags.

* src/nodeinfo.h (nodeGetCPUStats, nodeGetMemoryStats): Drop
unused attribute.
* src/interface/netcf_driver.c (interfaceOpenInterface)
(interfaceDefineXML, interfaceCreate, interfaceDestroy): Reject
unknown flags.
* src/network/bridge_driver.c (networkOpenNetwork)
(networkGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_driver.c (nwfilterOpen): Likewise.
* src/secret/secret_driver.c (secretOpen, secretDefineXML)
(secretGetXMLDesc, secretSetValue): Likewise.
* src/util/logging.c (virLogDefineFilter, virLogDefineOutput)
(virLogMessage): Likewise; also use unsigned flags.
* src/util/logging.h (virLogDefineFilter, virLogDefineOutput)
(virLogMessage): Change signature.
* src/util/command.c (virExecWithHook): Likewise.

Like commit 1740c381, but for libvirt-qemu.

* src/remote/qemu_protocol.x (qemu_monitor_command_args): Adjust
type to match API.
* src/qemu_protocol-structs: Update accordingly.

Continuation of commit 313ac7fd, and enforce things with a syntax
check.

Technically, virNetServerClientCalculateHandleMode is not printing
a mode_t, but rather a collection of VIR_EVENT_HANDLE_* bits;
however, these bits are < 8, so there is no different in the
output, and that was the easiest way to silence the new syntax check.

* cfg.mk (sc_flags_debug): New syntax check.
(exclude_file_name_regexp--sc_flags_debug): Add exemptions.
* src/fdstream.c (virFDStreamOpenFileInternal): Print flags in
hex, mode_t in octal.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopInit): Likewise.
* src/locking/lock_driver_sanlock.c (virLockManagerSanlockInit):
Likewise.
* src/locking/lock_manager.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
* src/rpc/virnetserverclient.c
(virNetServerClientCalculateHandleMode): Print mode with %o.

* cfg.mk (VC_LIST_ALWAYS_EXCLUDE_REGEX): Exempt
docs/api_extension/*.patch.
(exclude_file_name_regexp--sc_prohibit_always_true_header_tests)
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF)
(exclude_file_name_regexp--sc_prohibit_fork_wrappers)
(exclude_file_name_regexp--sc_trailing_blank): Simplify.
(exclude_file_name_regexp--sc_prohibit_gettext_noop): Delete.
(exclude_file_name_regexp--sc_prohibit_close)
(exclude_file_name_regexp--sc_prohibit_nonreentrant)
(exclude_file_name_regexp--sc_prohibit_sprintf): Tighten.

I got bit in a debugging session on an uninstalled libvirtd; the
code tried to call out to the installed $LIBEXECDIR/libvirt_iohelper
instead of my just-built version.  So I set a breakpoint and altered
the binary name to be "./src/libvirt_iohelper", and it still failed
because I don't have "." on my PATH.

According to POSIX, execvp only searches PATH if the name does
not contain a slash.  Since we are trying to mimic that behavior,
an anchored name should be relative to the current working dir.

This tightens existing behavior, but most callers already pass
an absolute name or a name with no slashes, so it probably won't
be noticeable.

* src/util/util.c (virFindFileInPath): Anchored relative names do
not invoke a PATH search.

When replacing the default SEGV/ABORT/BUS signal handlers you
can't rely on the process being terminated after your custom
handler runs. It is neccessary to manually restore the default
handler and then re-raise the signal

* src/rpc/virnetserver.c: Restore default handler and raise
  signal

* src/rpc/virnetserverprogram.h: Remove unused typedef for
  virNetServerProgramErrorHander function callback
* daemon/remote.h: Remove decl for non-existant variables

When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.

Most of the code in these two functions is supposed to be identical but
currently it isn't (which is natural since the code is duplicated).
Let's move common parts of these functions into qemuMigrationPrepareAny.

This also fixes qemuMigrationPrepareTunnel which didn't store received
lockState in the domain object.

Asynchronous jobs may take long time to finish and may consist of
several phases which we need to now about to help with recovery/rollback
after libvirtd restarts.

Detect and react on situations when libvirtd was restarted or killed
when a job was active.

If libvirtd is restarted when a job is running, the new libvirtd process
needs to know about that to be able to recover and rollback the
operation.

Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.

The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.

The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).

Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.

Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.

EnterMonitor and ExitMonitor methods are very similar to their
*WithDriver variants; consolidate them into EnterMonitorInternal and
ExitMonitorInternal to avoid (mainly future) code duplication.

This avoids code duplication and also avoids relying on good luck that
ignore_value(virDomainObjUnref(obj)) doesn't set errno.

Incrementally running 'make syntax-check' on a tree previously
built after commit 62dee6fa but before 44036460 fails sc_po_check
(because the generated qemu_dispatch.h gained translatable strings).
This is a followup to commit addaa537 for that scenario.

* cfg.mk (sc_po_check): Add another prereq.
($(srcdir)/daemon/qemu_dispatch.h): Add rule.

* docs/todo.pl: Skip closed bugs

The UML inotify handler would kill off guests when certain
conditions arise, but it forgot to remove transient guests
from the list of domains

* src/uml/uml_driver.c: Cleanup transient guests

* src/uml/uml_driver.c: Add audit hooks

* src/lxc/lxc_driver.c: Add auditing hooks

Since a host can run several different virtualization types at
the same time, audit messages should allow domains to be identified.
Add a 'virt={qemu,kvm,uml,lxc,...}' key to domain audit messages

* src/conf/domain_audit.c: Identify virt type of guest

When passing through filesystems from the host to a guest, the
host filesystem passed must be audited

* src/conf/domain_audit.{c,h}: Add virDomainAuditFS

The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}

* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
  src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c: Update for changed audit API names

To avoid using or freeing uninitialized memory or pointers.

connectDBus is only used if HAVE_DBUS is set. Therefore mark
it as potentially unused.

V2: Remove policy kit references from virNetServer and use DBus APIs
    directly, if available.

Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.

/proc/$PID/exe is resolved to identify the full command
binary path

After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.

* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
  qemuProcessAttach to connect to the monitor of an
  existing QEMU process

When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API for checking if KVM is enabled

To enable attaching to externally launched QEMU, we need
to be able to reverse engineer a guest XML config based
on the argv for a PID in /proc

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Add
  qemuParseCommandLinePid which extracts QEMU config from
  argv in /proc, given a PID number

When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
  pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
  params when calling qemuParseCommandLineString

Avoid re-formatting the pidfile path everytime we need it. Create
it once when starting the guest, and preserve it until the guest
is shutdown.

* src/libvirt_private.syms, src/util/util.c,
  src/util/util.h: Add virFileReadPidPath
* src/qemu/qemu_domain.h: Add pidfile field
* src/qemu/qemu_process.c: Store pidfile path in qemuDomainObjPrivate

This command allows libvirt to attach to an existing QEMU
instance.

 $ qemu-kvm -cdrom ~/demo.iso \
     -monitor unix:/tmp/demo,server,nowait \
     -name foo \
     -uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea  &
 $ QEMUPID=$!
 $ virsh qemu-attach $QEMUPID