When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.

POSIX states that 'a=1; a=2 b=$a command' has unspecified results
for the value of $b visible within command.  In particular, on
BSD, this resulted in PATH not picking up the in-test ssh.

* tests/Makefile.am (lv_abs_top_builddir): New macro.
(path_add, TESTS_ENVIRONMENT): Use it to avoid referring to an
environment variable set previously within the same command line.
Reported by Matthias Bolte.

Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: NEric Blake <eblake@redhat.com>

I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.

Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed.  Skip the test rather than failing
compilation in that case.

With newer gcc, the test consumed too much stack space.  Move
things to static storage to fix that.

* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.

This test case checks certification validation rules for

 - Basic constraints
 - Key purpose
 - Key usage
 - Start/expiry times

It checks initial context creation sanity checks, and live
session validation

The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:

networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.

networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.

networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.

bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.

qemu_(command|driver|hotplug|process).c - add calls to the above APIs
    in the appropriate places.

tests/Makefile.am - we need to include libvirt_driver_network.la
    whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
    symbols (in functions that are never called by the test
    programs...)

Don't print OK/FAIL for tests that decide to be skipped after
calling virtTestMain. Delay printing of the indentation before
the first test until we know that the test didn't decide to be
skipped.

Also make the reconnect test use VIRT_TEST_MAIN.

Currently, the xen statstest and reconnect tests are only compiled
if xend is running.  Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.

This is in response to Eric's suggestion here

https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html

Reported by Ruben Kerkhof.

Move non-esx specific tests from esxutilstest there and add a
test for virParseVersionString.

According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process.  Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.

* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.

* tests/Makefile.am: Remove jsondata.h

While investigating some memory leaks it was unclear whether the
JSON code correctly free'd all memory during parsing. Add a test
case which can be run under valgrind to clearly demonstrate that
the parser is leak free.

* tests/Makefile.am: Add 'jsontest'
* tests/jsontest.c: A few simple JSON parsing tests

The regression testing done by comparison of command-line
generated from the network XML file and the expected
command-line arguments (read from file).
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.

It can listen for UNIX and TCP stream sockets.

It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
  sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests

This provides a new struct that contains a buffer for the RPC
message header+payload, as well as a decoded copy of the message
header. There is an API for applying a XDR encoding & decoding
of the message headers and payloads. There are also APIs for
maintaining a simple FIFO queue of message instances.

Expected usage scenarios are:

To send a message

   msg = virNetMessageNew()

   ...fill in msg->header fields..
   virNetMessageEncodeHeader(msg)
   ...loook at msg->header fields to determine payload filter
   virNetMessageEncodePayload(msg, xdrfilter, data)
   ...send msg->bufferLength worth of data from buffer

To receive a message

   msg = virNetMessageNew()
   ...read VIR_NET_MESSAGE_LEN_MAX of data into buffer
   virNetMessageDecodeLength(msg)
   ...read msg->bufferLength-msg->bufferOffset of data into buffer
   virNetMessageDecodeHeader(msg)
   ...look at msg->header fields to determine payload filter
   virNetMessageDecodePayload(msg, xdrfilter, data)
   ...run payload processor

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal
  message handling API.
* testutils.c, testutils.h: Helper for printing binary differences
* virnetmessagetest.c: Validate all XDR encoding/decoding

This testcase passes before the regression is added in f0443765, fails
after that commit and passes again after the regression was fixed.

Steps to reproduce this problem:
1. # ./autogen.sh --without-libvirtd
2. # make dist
3. # rpmbuild --nodeps --define "_sourcedir `pwd`" -ba libvirt.spec
   ...
   make  check-TESTS
   make[1]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests'
   make[1]: *** No rule to make target `test_conf.sh', needed by `check-TESTS'.  Stop.
   make[1]: Leaving directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests'
   make: *** [check-am] Error 2
   error: Bad exit status from /var/tmp/rpm-tmp.7Rb9PV (%check)

This is a basic set of tests for testing removals of hash entries during
iteration.

* tests/virsh-optparse: New file.
* tests/Makefile.am (test_scripts): Use it.

The event loop implementation is used by more than just the
daemon, so move it into the shared area.

* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
  to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
  to use new virEventPoll APIs

Before the security driver was refactored in d6623003 seclabeltest and
secaatest were basically the same. seclabeltest was meant for SELinux
and secaatest for AppArmor. Both tests exited early when the specific
security driver backend wasn't enabled.

With the new security manager trying to initialize a disabled security
driver backend is an error that can't be distinguished from other errors
anymore. Therefore, the updated seclabeltest just asks for the first
available backend as this will always work even with SELinux and AppArmor
backend being disabled due to the new Nop backend.

Remove the obsolete secaatest and compile and run the seclabeltest
unconditional.

This fixes make check on systems that support AppArmor.

Commit 870dba07 (Mar 2008) added builddir/src to PATH to pick
up virsh.  Later, virsh was moved to tools; commit db68d6b1
(Oct 2009) noticed this, but only added the new location rather
than deleting the old location.

* tests/Makefile.am (path_add): Drop now-useless directory.
Suggested by Daniel P. Berrange.

Now the VMware driver doesn't depend on the ESX driver anymore.

Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE.
Also add a libvirt_vmx.syms file.

Move some escaping functions from esx_util.c to vmx.c.

Adapt the test suite, ESX and VMware driver to the new code layout.

* tests/Makefile.am (TESTS_ENVIRONMENT, commandtest_CFLAGS)
(commandhelper_CFLAGS): Avoid $(builddir) and $(abs_builddir) in
automake 1.9.6; fixes spurious failures of commandtest.

* tests/Makefile.am (EXTRA_DIST): Sort, and add directories.
(SUBDIRS): Drop automake recursion into subdirs.
* tests/commanddata/Makefile.am: Delete.
* tests/confdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am: Likewise.
* tests/xencapsdata/Makefile.am: Likewise.
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.

* tests/Makefile.am (SUBDIRS): Add commanddata.
* tests/commandtest.c (checkoutput): Delete correct file.
(test4): Delete pid file.
(mymain): Delete unused variable.
* tests/commanddata/Makefile.am: New file.
* configure.ac (AC_OUTPUT): Build new makefile.
Reported by Dominik Klein.

This introduces a new set of APIs in src/util/command.h
to use for invoking commands. This is intended to replace
all current usage of virRun and virExec variants, with a
more flexible and less error prone API.

* src/util/command.c: New file.
* src/util/command.h: New header.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms: Export symbols internally.
* tests/commandtest.c: New test.
* tests/Makefile.am (check_PROGRAMS): Run it.
* tests/commandhelper.c: Auxiliary program.
* tests/commanddata/test2.log - test15.log: New expected outputs.
* cfg.mk (useless_free_options): Add virCommandFree.
(msg_gen_function): Add virCommandError.
* po/POTFILES.in: New translation.
* .x-sc_avoid_write: Add exemption.
* tests/.gitignore: Ignore new built file.

* bootstrap.conf (gnulib_modules): Add configmake.
* daemon/Makefile.am (libvirtd_CFLAGS): Drop defines provided by
gnulib.
* src/Makefile.am (INCLUDES): Likewise.
* tests/Makefile.am (INCLUDES): Likewise.
* tools/Makefile.am (virsh_CFLAGS): Likewise.
* daemon/libvirtd.c (qemudInitPaths, usage, main): Update
clients.
* src/cpu/cpu_map.c (CPUMAPFILE): Likewise.
* src/driver.c (DEFAULT_DRIVER_DIR): Likewise.
* src/internal.h (_): Likewise.
* src/libvirt.c (virInitialize): Likewise.
* src/lxc/lxc_conf.h (LXC_CONFIG_DIR, LXC_STATE_DIR, LXC_LOG_DIR):
Likewise.
* src/lxc/lxc_conf.c (lxcCapsInit, lxcLoadDriverConfig):
Likewise.
* src/network/bridge_driver.c (NETWORK_PID_DIR)
(NETWORK_STATE_DIR, DNSMASQ_STATE_DIR, networkStartup): Likewise.
* src/nwfilter/nwfilter_driver.c (nwfilterDriverStartup):
Likewise.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Likewise.
* src/qemu/qemu_driver.c (qemudStartup): Likewise.
* src/remote/remote_driver.h (LIBVIRTD_PRIV_UNIX_SOCKET)
(LIBVIRTD_PRIV_UNIX_SOCKET_RO, LIBVIRTD_CONFIGURATION_FILE)
(LIBVIRT_PKI_DIR): Likewise.
* src/secret/secret_driver.c (secretDriverStartup): Likewise.
* src/security/security_apparmor.c (VIRT_AA_HELPER): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/storage_backend_disk.c (PARTHELPER): Likewise.
* src/storage/storage_driver.c (storageDriverStartup): Likewise.
* src/uml/uml_driver.c (TEMPDIR, umlStartup): Likewise.
* src/util/hooks.c (LIBVIRT_HOOK_DIR): Likewise.
* tools/virsh.c (main): Likewise.
* docs/hooks.html.in: Likewise.

Only build statstest and reconnect if they should be used, so add them
behind the ENABLE_XEN_TESTS conditional.

Add a test suite for check parsing, formatting, range calculation
and netmask checking APIs in virSocketAddr.

* tests/sockettest.c, tests/Makefile.am: Add new test case

The statstest is xen specific. Instead of filling the code with
a huge number of #ifdef WITH_XEN, just make its entire compilation
conditional in the Makefile.am. Also ensure it links to the Xen
driver so that it builds when driver modules are enabled

* tests/Makefile.am: Make statstest xen conditional. Link to
  xen driver
* tests/Makefile.am: Remove all conditionals

The current code will go into an infinite loop if the printf generated
string is >= 1000, AND exactly 1 character smaller than the amount of free
space in the buffer. When this happens, we are dropped into the loop body,
but nothing will actually change, because count == (buf->size - buf->use - 1),
and virBufferGrow returns unchanged if count < (buf->size - buf->use)

Fix this by removing the '- 1' bit from 'size'. The *nprintf functions handle
the NULL byte for us anyways, so we shouldn't need to manually accommodate
for it.

Here's a bug where we are actually hitting this issue:
https://bugzilla.redhat.com/show_bug.cgi?id=602772

v2: Eric's improvements: while -> if (), remove extra va_list variable,
    make sure we report buffer error if snprintf fails

v3: Add tests/virbuftest which reproduces the infinite loop before this
    patch, works correctly after

This avoids building the tests when testing libvirt is not the aim.

Add tests for auto memballon, implicit IDE, SCSI, virtio channel
controllers, and console/serial back compat.

Additionally, an explicit qemuxml2argvtest for scsi disks is added.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Instead of distributing the individual files.

Now it's less error prone and consistent with the rest of
the data directories in the tests directory.