Modify _virDomainBlockIoTuneInfo and rng schema to support the _length
options for bps/iops throttling values. Document the new values.

Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.

The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.

That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the union has only one member so remove that union.  If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Rather than VIR_ALLOC() the data, use virDomainChrSourceDefNew in order
to get the private data if necessary.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '5f2a1327' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel.  The data in the private structure
will be necessary in order to provide the secret properly.

This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's

Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.

This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than VIR_ALLOC of the virDomainChrDefPtr

Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Without them we're keeping <alias/> even for inactive XML.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are couple of formatting issues. No functional change
though.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address.  Also fix the indentation.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.

Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290

Use much simpler logic to determine parts of the code to print.

Rather than copy-paste - use a macro

Unfortunately due to how the RNG schema was written keeping the 'value'
and 'value'_max next to each other in the XML causes a schema failure,
so the FORMAT has to write out singly rather than optimizing to write
out both values at once
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit 581b7756.

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit c0f90799.

Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.

All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357

So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseString.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Return whether the live or persistent definition was returned. Sometimes
it's necessary to base the decisions on this.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This way we'll be able to hotplug with both --live and --config in one
API call.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366989

QEMU added another virtio-net tunable [1]. It basically allows
users to set the size of RX virtio ring. But because virtio-net
uses two separate ring buffers to pass data from/to guest they
named it explicitly rx_queue_size. We should expose it in our XML
too.

1: http://lists.nongnu.org/archive/html/qemu-devel/2016-08/msg02029.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>