Qemu reports physical size 0 for block devices. As 15fa84ac
changed the behavior of qemuDomainGetBlockInfo to just query the monitor
this created a regression since we didn't report the size correctly any
more.

This patch adds code to refresh the physical size of a block device by
opening it and seeking to the end and uses it both in
qemuDomainGetBlockInfo and also in qemuDomainGetStatsOneBlock that was
broken since it was introduced in this respect.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250982

The commit 7e72de49 didn't consider the hotplug scenarios. The patch addresses
the hotplug case whereby if atleast one of the pci function is owned by a
guest, the hotplug of other functions/devices in the same iommu group to the
same guest goes through successfully.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

While reviewing e8d55172 I've noticed a few unaligned lines.
Fix this.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We've split the python bindings a long time ago. However,
we are still requiring python-config (as an obfuscation to
python-devel). This does not make any sense. The only thing
we need is python, not python-devel.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virtio-net-pci adapter is capable to use irqfd with vhost-net only in MSI-X
mode, which appears to be available only on PCIe bus, at least on ARM
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Legacy -net option works correctly only with embedded device models, which
do not require any bus specification. Therefore, we should use -device for
PCI hardware
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Here we assume that if qemu supports generic PCI host controller,
it is a part of virt machine and can be used for adding PCI devices.

In qemu this is actually a PCIe bus, so we also declare multibus
capability so that 0'th bus is specified to qemu correctly as 'pcie.0'
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This capability specifies that qemu can implement generic PCI host
controller. It is often used for virtual environments, including ARM.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Libvirt doesn't reliably know the location of the backing chain when
pre-creating images for non-shared migration. This isn't a problem for
full copy, but incremental copy requires the information.

Forbid pre-creating the image in cases where incremental migration is
required. This limitation can perhaps be lifted once libvirt will fully
support loading of backing chain information from the XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249587

Update the names of the symbols used internally by the driver.

No functional changes.

Only the symbols exported by the driver have been updated;
the driver implementation itself still uses the old names
internally.

No functional changes.

The driver only supports VIR_ARCH_PPC64 and VIR_ARCH_PPC64LE.

Just shuffling files around and updating the build system
accordingly. No functional changes.

The recent changes to perform SCSI device address checks during the
post parse callbacks ran afoul of the Coverity checker since the changes
assumed that the 'xmlopt' parameter to virDomainDeviceDefPostParse
would be non NULL (commit id 'ca2cf74e'); however, what was missed
is there was an "if (xmlopt &&" check being made, so Coverity believed
that it could be possible for a NULL 'xmlopt'.

Checking the various calling paths seemingly disproves that. If called
from virDomainDeviceDefParse, there were two other possible calls that
would end up dereffing, so that path could not be NULL. If called via
virDomainDefPostParseDeviceIterator via virDomainDefPostParse there
are two callers (virDomainDefParseXML and qemuParseCommandLine)
which deref xmlopt either directly or through another call.

So I'm removing the check for non-NULL xmlopt.

https://bugzilla.redhat.com/show_bug.cgi?id=1250287

When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

In gnutls 3.4.3 there is a regression in the loading of private
keys via gnutls_x509_privkey_import. We already have a workaround
to deal with failures on older gnutls, but the error code that
the new gnutls returns is different. Extend the workaround so that
is checks for GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE too.

See also gnutls https://bugzilla.redhat.com/show_bug.cgi?id=1250020Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rather than provide a somewhat generic error message when the API
returns false, allow the caller to supply a "report = true" option
in order to cause virReportError's to describe which of the 3 paths
that can cause failure.

Some callers don't care about what caused the failure, they just want
to have a true/false - for those, calling with report = false should
be sufficient.

"Further" clarification (and testing) shows that using a SCSI Fibre
Channel NPIV device/lun from a storage pool as a <disk type='volume'
device'lun'> will work. So just add that to the allowable options

Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1230179

PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1180486Signed-off-by: NJán Tomko <jtomko@redhat.com>

PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from adding floppy disk for a PowerPC pseries VM.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Rather than calling virDomainDiskDefAssignAddress during the parsing of
the XML, moving the setting of disk addresses into the domain/device post
processing.

Commit id '37588b25' which introduced VIR_DOMAIN_DEF_PARSE_DISK_SOURCE
in order to avoid generating the address which wasn't required will not
be affected by this as all it cared about was processing the source XML.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove unused xmlopt param
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than calling virDomainHostdevAssignAddress during the parsing
of the XML, move the setting of a default hostdev address to domain/
device post processing.

Since the parse code no longer generates an address, we can remove
the virDomainDefMaybeAddHostdevSCSIcontroller since the call to
virDomainHostdevAssignAddress will attempt to add the controllers
that were not already defined in the XML.

This patch will also enforce that the address type is type 'drive'
when a SCSI subsystem <hostdev> element is provided with an <address>.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If virDomainControllerSCSINextUnit failed to find a slot on the current
VIR_DOMAIN_CONTROLLER_TYPE_SCSI controller(s), try to add a new controller;
otherwise, there may be multiple unit=0 entries for the same "next"
controller.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

While searching the hostdevs the drive type can be either *_TYPE_DRIVE
or *_TYPE_NONE.  If the type is _TYPE_NONE on the first scsi_host, then
there is an erroneous "match" that the address already exists.

Although this works by chance currently because hostdev's are added one
at a time and 'nhostdevs' would be zero, thus returning false for the
first hostdev added, a future patch will move the hostdev address
assignment into post processing resulting in the bad match.

This code is only called by path's expecting either drive or none.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add the xmlopt parameter that was saved during virDomainDefPostParse
to the parameters. A future patch will use it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move the functions above the post processing for upcoming patch
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modify virDomainDriveAddressIsUsedBy{Disk|Hostdev} and
virDomainSCSIDriveAddressIsUsed to take 'bus' and 'target'
parameters.  Will be used by future patches for more complete
address conflict checks
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since the only way virDomainHostdevAssignAddress can be called is from
within virDomainHostdevDefParseXML when hostdev->source.subsys.type is
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI, thus there's no need for redundancy.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Compiler error:

  ../../src/nodeinfo.c: In function 'nodeGetThreadsPerSubcore':
  ../../src/nodeinfo.c:2393: error: label 'out' defined but not used [-Wunused-label]
  ../../src/nodeinfo.c:2352: error: unused parameter 'arch' [-Wunused-parameter]

The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code.  And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed.  So
instead, lock it right back for qemu for now.  All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().

The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards.  Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This makes sure the subcore-unaware CPU counting logic is used
whenever the configuration is invalid.

This makes sure CPUs are counted correctly when some of the cores are
completely offline.

This makes sure CPUs are counted correctly when using the default
configuration, that is, all primary threads are online and all
secondary threads are offline.

The nodeGetThreadsPerSubcore() function is mocked to return 8 for
ppc64 tests, which corresponds to the default subcore mode.

Update the expected output for the deconfigured-cpus nodeinfo
test to account for this change.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The nodeinfo is reporting incorrect number of cpus and incorrect host
topology on PPC64 KVM hosts. The KVM hypervisor on PPC64 needs only
the primary thread in a core to be online, and the secondaries offlined.
While scheduling a guest in, the kvm scheduler wakes up the secondaries to
run in guest context.

The host scheduling of the guests happen at the core level(as only primary
thread is online). The kvm scheduler exploits as many threads of the core
as needed by guest. Further, starting POWER8, the processor allows splitting
a physical core into multiple subcores with 2 or 4 threads each. Again, only
the primary thread in a subcore is online in the host. The KVM-PPC
scheduler allows guests to exploit all the offline threads in the subcore,
by bringing them online when needed.
(Kernel patches on split-core http://www.spinics.net/lists/kvm-ppc/msg09121.html)

Recently with dynamic micro-threading changes in ppc-kvm, makes sure
to utilize all the offline cpus across guests, and across guests with
different cpu topologies.
(https://www.mail-archive.com/kvm@vger.kernel.org/msg115978.html)

Since the offline cpus are brought online in the guest context, it is safe
to count them as online. Nodeinfo today discounts these offline cpus from
cpu count/topology calclulation, and the nodeinfo output is not of any help
and the host appears overcommited when it is actually not.

The patch carefully counts those offline threads whose primary threads are
online. The host topology displayed by the nodeinfo is also fixed when the
host is in valid kvm state.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Use I/O vector (iovec) instead of one huge memory buffer as suggested
in https://bugzilla.redhat.com/show_bug.cgi?id=1026137#c7. This avoids
doing memmove() to big buffers and performance doesn't degrade if
source (virNetClientStreamQueuePacket()) is faster than sink
(virNetClientStreamRecvPacket()).

Resolves: http://bugzilla.redhat.com/1026137Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

s/virDomainFindBy/virDomainObjListFindBy/
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>

If cpuset is disabled or not available, it libvirt must not use it.
Mainly for actions that do not need it and can use sched_setaffinity()
or numa_membind() instead, because they will fail without good reason.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1244664Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>