Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

All files with those extensions are generated, so we can have
three generic rules instead of explicitly ignoring every single
instance.

Starting from commit 5b479f3b, libvirtd.pod is a source file
rather than a generated file. Update ignore patterns accordingly.

Since commit 9b77ce63 we create a .in file while building all
man pages, including those in the tools/ directory; update the
ignore patterns to take this change into account.

The new ignore patterns are generic enough that we can get rid of
a few existing ones as well.

This reverts commit 1e9808d3.

We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.

We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]

Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:

[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136

This patch introduces virt-admin client which is based on virsh client,
but had to reimplement several methods to meet virt-admin specific needs
or remove unnecessary virsh specific logic.

As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.

Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In e755186c we tried to introduce an example demonstrating
new virDomainRename API. Unfortunately, in the .gitignore we had
a different binary listed. It's 'rename' binary which we want git
to ignore, not 'test'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

And in the middle it prints out its name to demonstrate changes in later
patch(es).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit a2c5d16a switched to generating
libvirt_admin.syms, but forgot to add the generated file into
.gitignore, hence causing tree pollution post-build.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit 4e7ccf87.

I mistakenly pushed it along with the Admin API series.

You had only one job.  That's what you can say about this example
binary.  In future, parts of virsh that are usable for this binary
should be split into separate shell-utils and virt-admin should gain all
the cool features of virsh without too much code addition.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

No online docs are build from it since it doesn't really fit into our
document structure and new page will need to be created for it, but this
is at least a heads-up commit for easier parsing in order to build some
documentation (or python bindings) later on.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

For now there are only CONNECT_OPEN and CONNECT_CLOSE procedures.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This removes some noise when you're working on the repository
and also have a bunch of source files open in Vim in another
terminal.

This means new libxl-lockd.conf and libxl-sanlock.conf
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This reverts commit 2c78051a.

Conflicts:
	src/Makefile.am
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Introduce a Xen xl parser

This parser allows for users to convert the new xl disk format and
spice graphics config to libvirt xml format and vice versa. Regarding
the spice graphics config, the code is pretty much straight forward.
For the disk {formating, parsing}, this parser takes care of the new
xl format which include positional parameters and key/value parameters.
In xl format disk config a <diskspec> consists of parameters separated by
commas. If the parameters do not contain an '=' they are automatically
assigned to certain options following the order below

   target, format, vdev, access

The above are the only mandatory parameters in the <diskspec> but there
are many more disk config options. These options can be specified as
key=value pairs. This takes care of the rest of the options such as

  devtype, backend, backendtype, script, direct-io-safe,

The positional paramters can also be specified in key/value form
for example

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume

are interpleted to one config.

In xm format, the above diskspec would be written as

phy:/dev/vg/guest-volume,hda,w

The disk parser is based on the same parser used successfully by
the Xen project for several years now.  Ian Jackson authored the
scanner, which is used by this commit with mimimal changes.  Only
the PREFIX option is changed, to produce function and file names
more consistent with libvirt's convention.
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Pushed as trivial and pre-ACK'd here:

https://www.redhat.com/archives/libvir-list/2014-November/msg00180.htmlSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>

When using git-status during configure phase, three additional files are
shown as untracked.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?

It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.

Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When testing language bindings it is useful to be able to build
them against an uninstalled libvirt source tree. Add a dummy
set of pkg-config files to allow for this. This can be used by
setting

  export PKG_CONFIG_PATH=/path/to/libvirt/git/src
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.
Signed-off-by: NSahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>

When ran, cil is throwing out some errors and warnings for obsolete
'or' unused variables and wrong module name (it should not contain a
hyphen; hence the rename).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is a forever growing list of test cases. It is just
not worth listing each one individually when a wildcard
can do the job.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Mock the /sys/bus/usb directory and test the finding
(and not finding) of some USB devices.

The cygwin compiler automatically creates a '*.exe.manifest'
companion file for any .exe file that contains a substring
that would otherwise cause newer Windows to pester users about
needing admin rights (such as "update", "instal", "setup"...).
This means that compilation on cygwin left behind
tests/networkxml2xmlupdatetest.exe.manifest.

* .gitignore: Ignore manifest files.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.

While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.

Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config

It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.

fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.

As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.

This test creates a Fake NUMA topology with non-sequential cell ids
to check if libvirt properly handles the same
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com>

Adding tests for new virKMod{Config|Load|Unload}() API's.

A test for virKModIsBlacklisted() would require some setup which cannot
be assumed.

This creates the basic unit tests for the scsi utils.
Signed-off-by: NOsier Yang <jyang@redhat.com>

Introduce Wireshark dissector plugin which adds support to Wireshark
for dissecting libvirt RPC protocol.
Added following files to build Wireshark dissector from libvirt source
tree.
* tools/wireshark/*: Source tree of Wireshark dissector plugin.

Added followings to configure.ac or Makefile.am.
configure.ac
* --with-wireshark-dissector: Enable support for building Wireshark
  dissector.
* --with-ws-plugindir: Specify wireshark plugin directory that dissector
  will installed.
* Added tools/wireshark/{Makefile,src/Makefile} to  AC_CONFIG_FILES.
Makefile.am
* Added tools/wireshark/ to SUBDIR.

I ran 'git add .' for a patch in progress, while in the middle
of running 'make check' to test my work, and was surprised when
it picked up some files I wasn't expecting.

* .gitignore: Ignore *.pem.
Signed-off-by: NEric Blake <eblake@redhat.com>

This partially reverts 5eb4b042 and 62774afb.

Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>