- 06 4月, 2010 2 次提交
-
-
由 Stefan Berger 提交于
This patch adds a relaxng nwfilter schema along with a test that verifies all the test output XML against the schema. The input XMLs contain a lot of intentional out-of-range values that make them fail the schema verification, so I am not verifying against those.
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 02 4月, 2010 1 次提交
-
-
由 Laine Stump 提交于
The clock timer XML is being updated in the following ways (based on further off-list discussion that was missed during the initial implementation): 1) 'wallclock' is changed to 'track', and the possible values are 'boot' (corresponds to old 'host'), 'guest', and 'wall'. 2) 'mode' has an additional value 'smpsafe' 3) when tickpolicy='catchup', there can be an optional sub-element of timer called 'catchup': <catchup threshold=123 slew=120 limit=10000/> Those three values are all longs, always optional, and if they are present, they are positive. Internally, 0 indicates "unspecified". * docs/schemas/domain.rng: updated RNG definition to account for changes * src/conf/domain_conf.h: change the C struct and enums to match changes. * src/conf/domain_conf.c: timer parse and format functions changed to handle the new selections and new element. * src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack* * src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
-
- 01 4月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* cfg.mk (sc_prohibit_test_minus_ao): Also check for [. * docs/Makefile.am (%.html, html/index.html): Avoid non-portable test usage. * libvirt.spec.in (%post): Likewise. * tools/virt-pki-validate.in (servercert.pem): Likewise. * configure.ac (LOGNAME): Use test, not [, in files processed by autoconf. Detected by Matthias Bolte.
-
由 Matthias Bolte 提交于
-
- 30 3月, 2010 1 次提交
-
-
由 Laine Stump 提交于
timers are sub-elements of clocks. A clock can have zero or more instances of timer. Within the timer, only the name attribute is required; all other attributes are optional. A simpler representation of a timer element is: <timer name='platform|pit|rtc|hpet|tsc' wallclock='host|guest' tickpolicy='delay|catchup|merge|discard' frequency='123' mode='auto|native|emulate|paravirt' present='yes|no'/> frequency is a ulong. All other attributes are simple enums.
-
- 27 3月, 2010 1 次提交
-
-
由 David Allan 提交于
* Fixes per feedback from Dan and Daniel * Added test datafiles * Re-disabled JSON flags * Added code to print the error policy attribute when generating XML * Re-add empty tag
-
- 26 3月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
In the documentation mention that the direct device support is there since libvirt 0.7.7. A Linux kernel 2.6.34 is required for macvtap to be available as standard device.
-
- 23 3月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Use the __declspec(dllexport/dllimport) stuff to export the symbol, otherwise accessing virConnectAuthPtrDefault triggers a segfault.
-
- 18 3月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
xsltproc complained about this.
-
- 13 3月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 10 3月, 2010 4 次提交
-
-
由 Eric Blake 提交于
With N_() in place, we can use it for a smaller file. * doc/api-extension/0008-Step-8-of-8-Add-virsh-support.patch: Replace all uses of gettext_noop with N_. * tools/virsh.c: Likewise, throughout the file.
-
由 Jim Meyering 提交于
* HACKING: Mark as read-only. Soon we'll generate it from... * docs/hacking.html.in: ... this file. More typo fixes.
-
由 Eric Blake 提交于
* doc/hacking.html.in (preprocessor): New section to document recently-discussed style issues. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
* docs/hacking.html.in (committers): Fix spelling and grammar.
-
- 08 3月, 2010 1 次提交
-
-
由 David Allan 提交于
* Added section on use of goto * Added missing content from HACKING document
-
- 06 3月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac libvirt.spec.in: update with new version * docs/news.html.in: add list of changes in 0.7.7 * po/*po*: updated spanish and russian localisations, rebuilt
-
- 05 3月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This adds more information about the different macvtap device modes, spells out VEPA and adds a link to a pdf at the ieee site.
-
- 02 3月, 2010 4 次提交
-
-
由 Jim Meyering 提交于
* docs/schemas/capability.rng: Likewise. * docs/schemas/network.rng: Likewise. * docs/schemas/nodedev.rng: Likewise. * docs/schemas/storagepool.rng: Likewise. * docs/schemas/storagevol.rng: Likewise. Use these commands: t=$'\t' git ls-files | grep '\.rng$' | xargs grep -lE "^ *$t" \ | xargs perl -MText::Tabs -ni -le \ '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
-
由 Daniel P. Berrange 提交于
* formatdomain.html.in: Document new clock options
-
由 Daniel P. Berrange 提交于
This extends the XML to allow for <clock offset='timezone' timezone='Europe/Paris'/> This is useful if the admin has not configured any timezone on the host OS, but still wants to synchronize a guest to a specific one. * src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra 'timezone' attribute on clock configuration * docs/schemas/domain.rng: Add 'timezone' attribute * src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs with a configurable timezone
-
由 Daniel P. Berrange 提交于
This introduces a third option for clock offset synchronization, that allows an arbitrary / variable adjustment to be set. In essence the XML contains the time delta in seconds, relative to UTC. <clock offset='variable' adjustment='123465'/> The difference from 'utc' mode, is that management apps should track adjustments and preserve them at next reboot. * docs/schemas/domain.rng: Schema for new clock mode * src/conf/domain_conf.c, src/conf/domain_conf.h: Parse new clock time delta * src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add virXPathLongLong() method
-
- 25 2月, 2010 5 次提交
-
-
由 Jim Meyering 提交于
Add missing rule to build html/libvirt-libvirt.html. Use a GNU Make pattern rule to avoid running apibuild.py once for each out-of-date target, in a parallel build. * docs/Makefile.am
-
由 Jim Meyering 提交于
* docs/Makefile.am (libvirt-api.xml libvirt-refs.xml): Generalize apibuild.py to work in a non-srcdir build. Pass "srcdir" to it. * docs/apibuild.py (rebuild): Honor the $srcdir envvar.
-
由 Jim Meyering 提交于
* docs/Makefile.am (MAINTAINERCLEANFILES): Use this variable for generated-and-distributed files, not "CLEANFILES". Besides, "make clean" and "make distclean" should not delete distributed files.
-
由 Jim Meyering 提交于
* docs/Makefile.am (EXTRA_DIST): Add sitemap.html.in.
-
由 Jim Meyering 提交于
* docs/Makefile.am (libvirt-api.xml): Insert missing "$(srcdir)/". Also, remove unnecessary sub-shell.
-
- 24 2月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This adds a description about the 'direct' type of interface recently added for macvtap device type support on the host.
-
- 23 2月, 2010 9 次提交
-
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
- 21 2月, 2010 1 次提交
-
-
由 Dan Kenigsberg 提交于
-
- 19 2月, 2010 1 次提交
-
-
由 Matthew Booth 提交于
Add support for virtio-serial by defining a new 'virtio' channel target type and a virtio-serial controller. Allows the following to be specified in a domain: <controller type='virtio-serial' index='0' ports='16' vectors='4'/> <channel type='pty'> <target type='virtio' name='org.linux-kvm.port.0'/> <address type='virtio-serial' controller='0' bus='0'/> </channel> * docs/schemas/domain.rng: Add virtio-serial controller and virtio channel type. * src/conf/domain_conf.[ch]: Domain parsing/serialization for virtio-serial controller and virtio channel. * tests/qemuxml2xmltest.c tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml parsing test * src/libvirt_private.syms src/qemu/qemu_conf.c: virDomainDefAddDiskControllers() renamed to virDomainDefAddImplicitControllers()
-
- 18 2月, 2010 1 次提交
-
-
由 Matthew Booth 提交于
* src/schemas/domain.rng: Replace tabs with 8 spaces
-