Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

This function didn't report an error on OOM. Better delete it
and use virStringReplace instead. :)

Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.

* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Fix minor typos in source comments
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If there is no error while executing a function "openvzParseBarrierLimit"
a "str" string where is duplicate of a "value" string isn't freed and it
leads into memory leak.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Semantics of the libvirt helper are more clear. This change also allows
to clean up some pieces of code.

The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Detected by a simple Shell script:

for i in $(git ls-files -- '*.[ch]'); do
    awk 'BEGIN {
        fail=0
    }
    /# *include.*\.h/{
        match($0, /["<][^">]*[">]/)
        arr[substr($0, RSTART+1, RLENGTH-2)]++
    }
    END {
        for (key in arr) {
            if (arr[key] > 1) {
                fail=1
                printf("%d %s\n", arr[key], key)
            }
        }
        if (fail == 1)
            exit 1
    }' $i

    if test $? != 0; then
        echo "Duplicate header(s) in $i"
    fi
done;

A later patch will add the syntax-check to avoid duplicate
headers.

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.

This gets rid of the parameter in favor of using the new callback
infrastructure to do the same stuff.

This patch implements the domain adjustment callback in the openVZ
driver and moves the check from the parser to a new validation method in
the callback infrastructure.

Move the xmlopt and caps arguments to the end of the argument list.

This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.

This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.

The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.

To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.

This pair, used in virDomainCreateXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainRestoreFlags:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, true)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainDefineXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   0, NULL)))
     goto cleanup;

As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.

As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach

The APIs names for accessing the domain list object are
very inconsistent. Rename them all to have a standard
virDomainObjList prefix.

The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.

Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.

Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.

N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

openvzOpen fucntion must leave unlocked virDomainObj objects in
driver->domains.

Now even simple commands like list or domain lookup hang,
for example virsh -c openvz:///system list --all.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>