- 04 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
If user or management application wants to create a guest, it may be useful to know the cost of internode latencies before the guest resources are pinned. For example: <capabilities> <host> ... <topology> <cells num='2'> <cell id='0'> <memory unit='KiB'>4004132</memory> <distances> <sibling id='0' value='10'/> <sibling id='1' value='20'/> </distances> <cpus num='2'> <cpu id='0' socket_id='0' core_id='0' siblings='0'/> <cpu id='2' socket_id='0' core_id='2' siblings='2'/> </cpus> </cell> <cell id='1'> <memory unit='KiB'>4030064</memory> <distances> <sibling id='0' value='20'/> <sibling id='1' value='10'/> </distances> <cpus num='2'> <cpu id='1' socket_id='0' core_id='0' siblings='1'/> <cpu id='3' socket_id='0' core_id='2' siblings='3'/> </cpus> </cell> </cells> </topology> ... </host> ... </capabilities> We can see the distance from node1 to node0 is 20 and within nodes 10. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 27 4月, 2014 1 次提交
-
-
由 Laine Stump 提交于
Experimentation showed that if virNetworkCreateXML() was called for a network that was already defined, and then the network was subsequently shutdown, the network would continue to be persistent after the shutdown (expected/desired), but the original config would be lost in favor of the transient config sent in with virNetworkCreateXML() (which would then be the new persistent config) (obviously unexpected/not desired). To fix this, virNetworkObjAssignDef() has been changed to 1) properly save/free network->def and network->newDef for all the various combinations of live/active/persistent, including some combinations that were previously considered to be an error but didn't need to be (e.g. setting a "live" config for a network that isn't yet active but soon will be - that was previously considered an error, even though in practice it can be very useful). 2) automatically set the persistent flag whenever a new non-live config is assigned to the network (and clear it when the non-live config is set to NULL). the libvirt network driver no longer directly manipulates network->persistent, but instead relies entirely on virNetworkObjAssignDef() to do the right thing automatically. After this patch, the following sequence will behave as expected: virNetworkDefineXML(X) virNetworkCreateXML(X') (same name but some config different) virNetworkDestroy(X) At the end of these calls, the network config will remain as it was after the initial virNetworkDefine(), whereas previously it would take on the changes given during virNetworkCreateXML(). Another effect of this tighter coupling between a) setting a !live def and b) setting/clearing the "persistent" flag, is that future patches which change the details of network lifecycle management (e.g. upcoming patches to fix detection of "active" networks when libvirtd is restarted) will find it much more difficult to break persistence functionality.
-
- 08 4月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
Now that we ditched our custom pthread impl for Win32, we can use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids the need to use a virOnce one-time global initializer in a number of places. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 02 4月, 2014 1 次提交
-
-
由 Eric Blake 提交于
One of the features of qcow2 is that a wrapper file can have more capacity than its backing file from the guest's perspective; what's more, sparse files make tracking allocation of both the active and backing file worthwhile. As such, it makes more sense to show allocation numbers for each file in a chain, and not just the top-level file. This sets up the fields for the tracking, although it does not modify XML to display any new information. * src/util/virstoragefile.h (_virStorageSource): Add fields. * src/conf/storage_conf.h (_virStorageVolDef): Drop redundant fields. * src/storage/storage_backend.c (virStorageBackendCreateBlockFrom) (createRawFile, virStorageBackendCreateQemuImgCmd) (virStorageBackendCreateQcowCreate): Update clients. * src/storage/storage_driver.c (storageVolDelete) (storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize) (storageVolWipeInternal, storageVolGetInfo): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendProbeTarget) (virStorageBackendFileSystemRefresh) (virStorageBackendFileSystemVolResize) (virStorageBackendFileSystemVolRefresh): Likewise. * src/storage/storage_backend_logical.c (virStorageBackendLogicalMakeVol) (virStorageBackendLogicalCreateVol): Likewise. * src/storage/storage_backend_scsi.c (virStorageBackendSCSINewLun): Likewise. * src/storage/storage_backend_mpath.c (virStorageBackendMpathNewVol): Likewise. * src/storage/storage_backend_rbd.c (volStorageBackendRBDRefreshVolInfo) (virStorageBackendRBDCreateImage): Likewise. * src/storage/storage_backend_disk.c (virStorageBackendDiskMakeDataVol) (virStorageBackendDiskCreateVol): Likewise. * src/storage/storage_backend_sheepdog.c (virStorageBackendSheepdogBuildVol) (virStorageBackendSheepdogParseVdiList): Likewise. * src/storage/storage_backend_gluster.c (virStorageBackendGlusterRefreshVol): Likewise. * src/conf/storage_conf.c (virStorageVolDefFormat) (virStorageVolDefParseXML): Likewise. * src/test/test_driver.c (testOpenVolumesForPool) (testStorageVolCreateXML, testStorageVolCreateXMLFrom) (testStorageVolDelete, testStorageVolGetInfo): Likewise. * src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc): Likewise. * src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc) (esxStorageVolCreateXML): Likewise. * src/parallels/parallels_driver.c (parallelsAddHddByVolume): Likewise. * src/parallels/parallels_storage.c (parallelsDiskDescParseNode) (parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom) (parallelsStorageVolDefRemove, parallelsStorageVolGetInfo): Likewise. * src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML) (vboxStorageVolGetXMLDesc): Likewise. * tests/storagebackendsheepdogtest.c (test_vdi_list_parser): Likewise. * src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
-
- 25 3月, 2014 2 次提交
-
-
由 Ján Tomko 提交于
-
由 Qiao Nuohan 提交于
--memory-only option is introduced without compression supported. Now qemu has support for dumping domain's memory in kdump-compressed format. This patch adds a new virDomainCoreDumpWithFormat API, so that the format in which qemu dumps domain's memory can be specified. Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 21 3月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 18 3月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
Any source file which calls the logging APIs now needs to have a VIR_LOG_INIT("source.name") declaration at the start of the file. This provides a static variable of the virLogSource type. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 10 3月, 2014 2 次提交
-
-
由 Ján Tomko 提交于
Some of these are leftovers from renaming the files, others are just typos. Also introduce an ugly awk script to enforce this.
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 28 2月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
As of 0bd2ccde an empty disk path for virDomainBlockStats (or the one with Flags) is allowed meaning "get me overall summarized statistics". However, running 'virsh domblkstat $dom' throws a misleading error: # ./tools/virsh domblkstat dom error: Failed to get block stats dom error: invalid argument: invalid path: while after this commit # virsh domblkstat dom error: Operation not supported: summary statistics are not supported yet Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 05 2月, 2014 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1058839 Commit f9f56340 for CVE-2014-0028 almost had the right idea - we need to check the ACL rules to filter which events to send. But it overlooked one thing: the event dispatch queue is running in the main loop thread, and therefore does not normally have a current virIdentityPtr. But filter checks can be based on current identity, so when libvirtd.conf contains access_drivers=["polkit"], we ended up rejecting access for EVERY event due to failure to look up the current identity, even if it should have been allowed. Furthermore, even for events that are triggered by API calls, it is important to remember that the point of events is that they can be copied across multiple connections, which may have separate identities and permissions. So even if events were dispatched from a context where we have an identity, we must change to the correct identity of the connection that will be receiving the event, rather than basing a decision on the context that triggered the event, when deciding whether to filter an event to a particular connection. If there were an easy way to get from virConnectPtr to the appropriate virIdentityPtr, then object_event.c could adjust the identity prior to checking whether to dispatch an event. But setting up that back-reference is a bit invasive. Instead, it is easier to delay the filtering check until lower down the stack, at the point where we have direct access to the RPC client object that owns an identity. As such, this patch ends up reverting a large portion of the framework of commit f9f56340. We also have to teach 'make check' to special-case the fact that the event registration filtering is done at the point of dispatch, rather than the point of registration. Note that even though we don't actually use virConnectDomainEventRegisterCheckACL (because the RegisterAny variant is sufficient), we still generate the function for the purposes of documenting that the filtering takes place. Also note that I did not entirely delete the notion of a filter from object_event.c; I still plan on using that for my upcoming patch series for qemu monitor events in libvirt-qemu.so. In other words, while this patch changes ACL filtering to live in remote.c and therefore we have no current client of the filtering in object_event.c, the notion of filtering in object_event.c is still useful down the road. * src/check-aclrules.pl: Exempt event registration from having to pass checkACL filter down call stack. * daemon/remote.c (remoteRelayDomainEventCheckACL) (remoteRelayNetworkEventCheckACL): New functions. (remoteRelay*Event*): Use new functions. * src/conf/domain_event.h (virDomainEventStateRegister) (virDomainEventStateRegisterID): Drop unused parameter. * src/conf/network_event.h (virNetworkEventStateRegisterID): Likewise. * src/conf/domain_event.c (virDomainEventFilter): Delete unused function. * src/conf/network_event.c (virNetworkEventFilter): Likewise. * src/libxl/libxl_driver.c: Adjust caller. * src/lxc/lxc_driver.c: Likewise. * src/network/bridge_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/test/test_driver.c: Likewise. * src/uml/uml_driver.c: Likewise. * src/vbox/vbox_tmpl.c: Likewise. * src/xen/xen_driver.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 16 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
Ever since ACL filtering was added in commit 76397360 (v1.1.1), a user could still use event registration to obtain access to a domain that they could not normally access via virDomainLookup* or virConnectListAllDomains and friends. We already have the framework in the RPC generator for creating the filter, and previous cleanup patches got us to the point that we can now wire the filter through the entire object event stack. Furthermore, whether or not domain:getattr is honored, use of global events is a form of obtaining a list of networks, which is covered by connect:search_domains added in a93cd08f (v1.1.0). Ideally, we'd have a way to enforce connect:search_domains when doing global registrations while omitting that check on a per-domain registration. But this patch just unconditionally requires connect:search_domains, even when no list could be obtained, based on the following observations: 1. Administrators are unlikely to grant domain:getattr for one or all domains while still denying connect:search_domains - a user that is able to manage domains will want to be able to manage them efficiently, but efficient management includes being able to list the domains they can access. The idea of denying connect:search_domains while still granting access to individual domains is therefore not adding any real security, but just serves as a layer of obscurity to annoy the end user. 2. In the current implementation, domain events are filtered on the client; the server has no idea if a domain filter was requested, and must therefore assume that all domain event requests are global. Even if we fix the RPC protocol to allow for server-side filtering for newer client/server combos, making the connect:serach_domains ACL check conditional on whether the domain argument was NULL won't benefit older clients. Therefore, we choose to document that connect:search_domains is a pre-requisite to any domain event management. Network events need the same treatment, with the obvious change of using connect:search_networks and network:getattr. * src/access/viraccessperm.h (VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS) (VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional effect of the permission. * src/conf/domain_event.h (virDomainEventStateRegister) (virDomainEventStateRegisterID): Add new parameter. * src/conf/network_event.h (virNetworkEventStateRegisterID): Likewise. * src/conf/object_event_private.h (virObjectEventStateRegisterID): Likewise. * src/conf/object_event.c (_virObjectEventCallback): Track a filter. (virObjectEventDispatchMatchCallback): Use filter. (virObjectEventCallbackListAddID): Register filter. * src/conf/domain_event.c (virDomainEventFilter): New function. (virDomainEventStateRegister, virDomainEventStateRegisterID): Adjust callers. * src/conf/network_event.c (virNetworkEventFilter): New function. (virNetworkEventStateRegisterID): Adjust caller. * src/remote/remote_protocol.x (REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER) (REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY) (REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a filter, and require connect:search_domains instead of weaker connect:read. * src/test/test_driver.c (testConnectDomainEventRegister) (testConnectDomainEventRegisterAny) (testConnectNetworkEventRegisterAny): Update callers. * src/remote/remote_driver.c (remoteConnectDomainEventRegister) (remoteConnectDomainEventRegisterAny): Likewise. * src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister) (xenUnifiedConnectDomainEventRegisterAny): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise. * src/libxl/libxl_driver.c (libxlConnectDomainEventRegister) (libxlConnectDomainEventRegisterAny): Likewise. * src/qemu/qemu_driver.c (qemuConnectDomainEventRegister) (qemuConnectDomainEventRegisterAny): Likewise. * src/uml/uml_driver.c (umlConnectDomainEventRegister) (umlConnectDomainEventRegisterAny): Likewise. * src/network/bridge_driver.c (networkConnectNetworkEventRegisterAny): Likewise. * src/lxc/lxc_driver.c (lxcConnectDomainEventRegister) (lxcConnectDomainEventRegisterAny): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 09 1月, 2014 1 次提交
-
-
由 Richard W.M. Jones 提交于
There is no easy way to test authentication against libvirt. This commit modifies the test driver to allow simple username/password authentication. You modify the test XML by adding: <node> ... <auth> <user password="123456">rich</user> <user>jane</user> </auth> </node> If there are any /node/auth/user elements, then authentication is required by the test driver (if none are present, then the test driver will work as before and not require authentication). In the example above, two phony users are added: rich password: 123456 jane no password required The test driver will demand a username. If the password attribute is present (or if the username entered is wrong), then the password is also asked for and checked: $ virsh -c test://$(pwd)/testnode.xml list Enter username for localhost: rich Enter rich's password for localhost: *** Id Name State ---------------------------------------------------- 1 fv0 running 2 fc4 running Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
-
- 08 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
While comparing network and domain events, I noticed that the test driver had to do a cast in one place and not the other. For consistency, we should hide the necessary casting as low as possible in the stack, with everything else using saner types. * src/conf/network_event.h (virNetworkEventStateRegisterID): Alter type. * src/conf/network_event.c (virNetworkEventStateRegisterID): Hoist cast here. * src/test/test_driver.c (testConnectNetworkEventRegisterAny): Simplify callers. * src/remote/remote_driver.c (remoteConnectNetworkEventRegisterAny): Likewise. * src/network/bridge_driver.c (networkConnectNetworkEventRegisterAny): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 1月, 2014 3 次提交
-
-
由 Eric Blake 提交于
Since the introduction of network events, any driver that uses a single event state object to track both domain and network events should not include 'domain' in the name of that object. * src/test/test_driver.c (_testConn): s/domainEventState/eventState/, and fix all callers. * src/remote/remote_driver.c (private_data): Likewise. (remoteDomainEventQueue): Rename to remoteEventQueue. (remoteDomainEvents): Rename to remoteEvents. Signed-off-by: NEric Blake <eblake@redhat.com>
-
test:///default由 Eric Blake 提交于
Prior to this patch, every test:/// URI has its own event manager, which means that registering for an event can only ever receive events from the connection where it issued the API that triggered the event. But the whole idea of events is to be able to learn about something where an API call did NOT trigger the action. In order to actually test asynchronous events, I wanted to be able to tie multiple test connections to the same state. Use of a file in a test URI is still per-connection state, but now parallel connections to test:///default (from the same binary, of course) now share common state and can affect one another. The updated testsuite fails without the rest of this patch. Valgrind didn't report any leaks. * src/test/test_driver.c (testConnectOpen): Move per-connection state initialization... (testOpenFromFile): ...here. (defaultConn, defaultConnections, defaultLock, testOnceInit): New shared state. (testOpenDefault): Only initialize on first connection. (testConnectClose): Don't clobber state if still shared. * tests/objecteventtest.c (testDomainStartStopEvent): Enhance to cover this. (timeout, mymain): Ensure test fails rather than blocks. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Ever since their introduction (commit 1509b802 in v0.5.0 for virConnectDomainEventRegister, commit 44457238 in v0.8.0 for virConnectDomainEventDeregisterAny), the event deregistration functions have been documented as returning 0 on success; likewise for older registration (only the newer RegisterAny must return a non-zero callbackID). And now that we are adding virConnectNetworkEventDeregisterAny for v1.2.1, it should have the same semantics. Fortunately, all of the stateful drivers have been obeying the docs and returning 0, thanks to the way the remote_driver tracks things (in fact, the RPC wire protocol is unable to send a return value for DomainEventRegisterAny, at least not without adding a new RPC number). Well, except for vbox, which was always failing deregistration, due to failure to set the return value to anything besides its initial -1. But for local drivers, such as test:///default, we've been returning non-zero numbers; worse, the non-zero numbers have differed over time. For example, in Fedora 12 (libvirt 0.8.2), calling Register twice would return 0 and 1 [the callbackID generated under the hood]; while in Fedora 20 (libvirt 1.1.3), it returns 1 and 2 [the number of callbacks registered for that event type]. Since we have changed the behavior over time, and since it differs by local vs. remote, we can safely argue that no one could have been reasonably relying on any particular behavior, so we might as well obey the docs, as well as prepare callers that might deal with older clients to not be surprised if the docs are not strictly followed. For consistency, this patch fixes the code for all drivers, even though it only makes an impact for vbox and for local drivers. By fixing all drivers, future copy and paste from a remote driver to a local driver is less likely to reintroduce the bug. Finally, update the testsuite to gain some coverage of the issue for local drivers, including the first test of old-style domain event registration via function pointer instead of event id. * src/libvirt.c (virConnectDomainEventRegister) (virConnectDomainEventDeregister) (virConnectDomainEventDeregisterAny): Clarify docs. * src/libxl/libxl_driver.c (libxlConnectDomainEventRegister) (libxlConnectDomainEventDeregister) (libxlConnectDomainEventDeregisterAny): Match documentation. * src/lxc/lxc_driver.c (lxcConnectDomainEventRegister) (lxcConnectDomainEventDeregister) (lxcConnectDomainEventDeregisterAny): Likewise. * src/test/test_driver.c (testConnectDomainEventRegister) (testConnectDomainEventDeregister) (testConnectDomainEventDeregisterAny) (testConnectNetworkEventDeregisterAny): Likewise. * src/uml/uml_driver.c (umlConnectDomainEventRegister) (umlConnectDomainEventDeregister) (umlConnectDomainEventDeregisterAny): Likewise. * src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister) (vboxConnectDomainEventDeregister) (vboxConnectDomainEventDeregisterAny): Likewise. * src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister) (xenUnifiedConnectDomainEventDeregister) (xenUnifiedConnectDomainEventDeregisterAny): Likewise. * src/network/bridge_driver.c (networkConnectNetworkEventDeregisterAny): Likewise. * tests/objecteventtest.c (testDomainCreateXMLOld): New test. (mymain): Run it. (testDomainCreateXML): Check return values. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 14 12月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
While the public API & wire protocol included the 'detail' arg for network lifecycle events, the internal event handling code did not process it. This meant that if a future libvirtd server starts sending non-0 'detail' args, the current libvirt client will not process them. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 11 12月, 2013 1 次提交
-
-
由 Cédric Bosdonnat 提交于
-
- 10 12月, 2013 5 次提交
-
-
由 Cédric Bosdonnat 提交于
-
由 Cédric Bosdonnat 提交于
The virDomainEvent class is kept as it indicates what meta informations are valid for the children classes. This may be useful in the future.
-
由 Cédric Bosdonnat 提交于
This aims at providing some consistency with other domain events
-
由 Cédric Bosdonnat 提交于
Added a parent class virObjectEvent for future event types
-
由 Cédric Bosdonnat 提交于
Leave virDomainEventRegister and its Deregister brother as these are legacy functions only for domain lifecycle events.
-
- 25 11月, 2013 1 次提交
-
-
由 Eric Blake 提交于
I didn't find any other instances with: git grep '1\.1\.5' * src/test/test_driver.c (testDriver): Tweak version info. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 21 11月, 2013 1 次提交
-
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/lxc/lxc_container.c: Consistently use commas. * src/openvz/openvz_driver.c: Likewise. * src/openvz/openvz_util.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/test/test_driver.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 11月, 2013 1 次提交
-
-
由 Giuseppe Scrivano 提交于
It uses the same functionalities of the qemu driver. Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
-
- 04 10月, 2013 4 次提交
-
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
Again stolen from qemu_driver.c, but dropping all the unneeded bits. This aims to copy all the current qemu validation checks since that's the most commonly used real driver, but some of the checks are completely artificial in the test driver. This only supports creation of internal snapshots for initial simplicity.
-
由 Cole Robinson 提交于
The user can pass it as a <test:domainsnapshot> subelement of a <domain>.
-
- 01 10月, 2013 3 次提交
-
-
由 Cole Robinson 提交于
This is just stolen from qemu_driver.c with tweaks to fit the test driver.
-
由 Cole Robinson 提交于
Also add a <test:hasmanagedsave> element to set this data when starting the connection.
-
由 Cole Robinson 提交于
Similar to the runstate commit, allow a boolean <test:transient/> element for setting domain persistence at driver startup.
-
- 26 9月, 2013 1 次提交
-
-
由 Cole Robinson 提交于
When passing in custom driver XML, allow a block like <domain xmlns:test='http://libvirt.org/schemas/domain/test/1.0'> ... <test:runstate>5</test:runstate> </domain> This is only read at initial driver start time, and sets the initial run state of the object. This is handy for UI testing. It's only wired up for domains, since that's the only conf/ infrastructure that supports namespaces at the moment.
-
- 24 9月, 2013 2 次提交
-
-
由 Claudio Bley 提交于
N.B. This had no ill effects as long as O_RDONLY is defined to to be 0, such that the expression (O_RDONLY < 0) yielded 0 again. Signed-off-by: NClaudio Bley <cbley@av-test.de>
-
由 Giuseppe Scrivano 提交于
Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 17 9月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
-
- 11 9月, 2013 1 次提交
-
-
由 Oskari Saarenmaa 提交于
Signed-off-by: NOskari Saarenmaa <os@ohmu.fi> Signed-off-by: NEric Blake <eblake@redhat.com>
-