The virNetServerMDNSTimeoutNew method was casting a long long
to an int when reporting errors. This should just be using
%lld instead of %d, avoiding the need to cast
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virnetdevtap.c and viruri.c files had two error report
messages which were not annotated with _(...)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Nearly every source file does something like

  #define VIR_FROM_THIS VIR_FROM_FOO
  #define virFooReportErorr(code, ...) \
     virReportErrorHelper(VIR_FROM_THIS, code,  __FILE__,    \
                          __FUNCTION__, __LINE__, \
                          __VA_ARGS__)

This creates needless duplication and inconsistent error
reporting function names in each file. It is trivial to
just have virterror_internal.h provide a virReportError
macro that is equivalent

* src/util/virterror_internal.h: Define virReportError(code, ...)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remote driver needs to make sure the driver lock is released before
entering client IO loop as that may block indefinitely in poll(). As a
direct consequence of not following this in stream APIs, tunneled
migration to a destination host which becomes non-responding may block
qemu driver. Luckily, if keepalive is turned for p2p migrations, both
remote and qemu drivers will get automagically unblocked after keepalive
timeout.

My previous patch wasn't complete as it converted from
(unsigned char *) to (virMacAddrPtr *). It should be
(virMacAddrPtr) only.

The previous commit (387117ad) was incomplete leaving those
who does not use libpcap with uncompilable sources beacuse
of incomplete conversion of virNWFilterDHCPSnoopReq function.

See https://www.redhat.com/archives/libvir-list/2012-July/msg00493.html

Basically building against librbd doesn't seem to actually require -lcrypto.

Also report the rbd linker flags in configure output

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

When host CPU could not be properly detected, virConnectCompareCPU will
just report that any CPU is incompatible with host CPU instead of
failing.

Even though qemu-kvm binaries can be used in TCG mode, libvirt would
only detect them if /dev/kvm was available. Thus, one would need to make
a /usr/bin/qemu symlink to be able to use TCG mode with qemu-kvm in an
environment without KVM support.

And even though QEMU is able to make use of KVM, libvirt would not
advertise KVM support unless there was a qemu-kvm symlink available.

This patch fixes both issues.

We should really advise (new) developers to send rebased patches
that apply cleanly and use git-send-email rather than all other
obscure ways.

If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.

* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
  Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
  qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
  QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
  for BALLOON_EVENT at connect to monitor. Add callback
  for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
  Add handling of BALLOON_EVENT and impl 'query-events'
  check
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this

* include/libvirt/libvirt.h.in: Define the
  virConnectDomainEventBalloonChangeCallback callback
  and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
  python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
  examples/domain-events/events-python/event-test.py: Add
  example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
  of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
  balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Adding CPU encoder/decoder for armhf to avoid runtime error messages.
Signed-off-by: NChuck Short <chuck.short@canonical.com>

When building with --disable-debug, VIR_DEBUG expands to a nop.
But parameters to VIR_DEBUG can be variables that are passed only
to VIR_DEBUG. In the case the building system complains about unused
variables.

Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:

    this function is not supported by the connection driver:
    virDomainMigrateToURI2

which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:

    Requested operation is not valid: direct migration is not supported
    by the connection driver

Commit 32a9aac2 switched libvirt to use the XDG base directories
to locate most of its data/config. In particular, the per-user socket
for qemu:///session is now stored in the XDG runtime directory.
This directory is located by looking at the XDG_RUNTIME_DIR environment
variable, with a fallback to ~/.cache/libvirt if this variable is not
set.

When the daemon is autospawned because a client application wants
to use qemu:///session, the daemon is ran in a clean environment
which does not contain XDG_RUNTIME_DIR. It will create its socket
in ~/.cache/libvirt. If the client application has XDG_RUNTIME_DIR
set, it will not look for the socket in the fallback place, and will
fail to connect to the autospawned daemon.

This patch adds XDG_RUNTIME_DIR to the daemon environment before
auto-starting it. I've done this in virNetSocketForkDaemon rather
than in virCommandAddEnvPassCommon as I wasn't sure we want to pass
these variables to other commands libvirt spawns. XDG_CACHE_HOME
and XDG_CONFIG_HOME are also added to the daemon env as it makes use
of those as well.

When calling 'lvcreate' if specifying both the '-L' and
'--virtualsize' options, the latter will be treated as
the capacity and the former as the allocation. This can
be used to support sparse volume creation. In addition,
when listing volumes it is necessary to include the 'size'
field in lvs output, so that we can detect sparse volume
allocation correctly.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To make it easier to dynamically change the command line ARGV,
switch all storage code over to use virCommandPtr APIs for
running programs
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

to match our CodingStyle.

Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.

Per the typical use of libvirt is to fork the qemu process with
qemu:qemu. Setting the pool permission mode as 0700 by default
will prevent the guest start with permission reason.

Define macro for the default pool and vol permission modes
incidentally.

Since we are not yet using the virNetServerPtr object for running
the event loop, we can't use virNetServerQuit(). Instead set the
global 'quit' flag in libvirt_lxc

Test filling of nodeinfo structure if /sys/devices/system/node does not
exist. (Based on dump from a real machine)

This patch adds test data that describe a machine that has two physical
processors that don't share same core id's on their cores. On this data
the "virsh nodeinfo" reported that the machine had 10 cores per socket
while the processor had only 8. (Before fixing nodeinfo gathering code).

This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.

This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b,
ac9dd4a6. (Those changes in nodeinfo.c
are efectively reverted by this patch).

This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.

This patch adds test data needed by the new way node information will be
gathered. This patch adds symlinks to cpu cores to their corresponding
node directory.

Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Added s390-virtio machine type to the XML schema for domains in order
to not fail the domain schema tests.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.

V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This is in preparation of the enablement of s390 guests with virtio devices.

The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.

By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This makes the driver fail with a clear error message in case of UUID
collisions (for example if somebody copied a container configuration
without updating the UUID) and also raises an error on other hash map
failures.

OpenVZ itself doesn't complain about duplicate UUIDs since this
parameter is only used by libvirt.

Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:

if (strstr(def->emulator, "kvm")) {
    def->virtType = VIR_DOMAIN_VIRT_KVM;
    def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}

Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features

The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother).  So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages.  This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.

* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.

Domains configured with autostart may fail to start if the host
network stack has not been started.  E.g. when using bridged
networking autostarting a domain can fail with

libvirtd[1403]: 2012-06-20 13:23:49.833+0000: 1485: error :
qemuAutostartDomain:177 : Failed to autostart VM 'test': Cannot get
interface MTU on 'br0': No such device