1. 11 7月, 2012 14 次提交
    • O
      storage: Default pool permission mode to 0755 · 8a544719
      Osier Yang 提交于
      Per the typical use of libvirt is to fork the qemu process with
      qemu:qemu. Setting the pool permission mode as 0700 by default
      will prevent the guest start with permission reason.
      
      Define macro for the default pool and vol permission modes
      incidentally.
      8a544719
    • D
      Fix shutdown of LXC controller · 97d7f02d
      Daniel P. Berrange 提交于
      Since we are not yet using the virNetServerPtr object for running
      the event loop, we can't use virNetServerQuit(). Instead set the
      global 'quit' flag in libvirt_lxc
      97d7f02d
    • P
      test: Add test case for nodeinfotest if host machine doesn't have NUMA · 7ea1dd93
      Peter Krempa 提交于
      Test filling of nodeinfo structure if /sys/devices/system/node does not
      exist. (Based on dump from a real machine)
      7ea1dd93
    • P
      test: Add new test case for nodeinfotest · 1aa1a45b
      Peter Krempa 提交于
      This patch adds test data that describe a machine that has two physical
      processors that don't share same core id's on their cores. On this data
      the "virsh nodeinfo" reported that the machine had 10 cores per socket
      while the processor had only 8. (Before fixing nodeinfo gathering code).
      1aa1a45b
    • P
      nodeinfo: Fix gathering of nodeinfo data structure · 80533ca2
      Peter Krempa 提交于
      This patch changes the way data to fill the nodeinfo structure are
      gathered. We've gathere the test data by iterating processors an sockets
      separately from nodes. The reported data was based solely on information
      about core id. Problems arise when eg cores in mulit-processor machines
      don't have same id's on both processors or maybe one physical processor
      contains more NUMA nodes.
      
      This patch changes the approach how we detect processors and nodes. Now
      we start at enumerating nodes and for each node processors, sockets and
      threads are enumerated separately. This approach provides acurate data
      that comply to docs about the nodeinfo structure. This also enables to
      get rid of hacks: see commits 10d9038b,
      ac9dd4a6. (Those changes in nodeinfo.c
      are efectively reverted by this patch).
      
      This patch also changes output of one of the tests, as the processor
      topology is now acquired more precisely.
      80533ca2
    • P
      nodeinfo_test: Enhance test data before changing nodeinfo gathering · 6dcf98c8
      Peter Krempa 提交于
      This patch adds test data needed by the new way node information will be
      gathered. This patch adds symlinks to cpu cores to their corresponding
      node directory.
      6dcf98c8
    • V
      S390: Adding testcases for s390 · 028ba4f3
      Viktor Mihajlovski 提交于
      Add minimal s390-virtio domain testcase and testcases for virtio serial,
      net, disk for the virtio-s390 bus.
      Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
      028ba4f3
    • V
      S390: Domain Schema for s390-virtio machines. · 1af7e319
      Viktor Mihajlovski 提交于
      Added s390-virtio machine type to the XML schema for domains in order
      to not fail the domain schema tests.
      Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
      1af7e319
    • V
      S390: Add support for virtio-s390 devices. · d0304eaa
      Viktor Mihajlovski 提交于
      The s390(x) architecture doesn't feature a PCI bus. For the purpose of
      supporting virtio devices a virtual bus called virtio-s390 is used.
      A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
      distinguish the virtio devices on s390 from PCI-based virtio devices.
      
      V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
      Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
      d0304eaa
    • V
      qemu: Change tests to use (modified) qemuDomainAssignAddresses · 6e15887f
      Viktor Mihajlovski 提交于
      Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
      This way the tests will work for new device address types as they show
      up in the future (like s390 device types).
      Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
      6e15887f
    • V
      qemu: Extended qemuDomainAssignAddresses to be callable from everywhere. · f5dd58a6
      Viktor Mihajlovski 提交于
      This is in preparation of the enablement of s390 guests with virtio devices.
      
      The assignment of device addresses happens in different places, i.e. the
      qemu driver and process modules as well as in the unit tests in slightly
      different flavors. Currently, these are PPC spapr-vio and PCI
      devices, virtio-s390 (not PCI based) will follow.
      
      By optionally passing to qemuDomainAssignAddresses the domain
      object and the capabilities it is now possible to call the function
      from most of the places (except for hotplug) where address assignment
      is done.
      Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
      f5dd58a6
    • G
      openvz: Handle domain obj hash map errors · 31351c31
      Guido Günther 提交于
      This makes the driver fail with a clear error message in case of UUID
      collisions (for example if somebody copied a container configuration
      without updating the UUID) and also raises an error on other hash map
      failures.
      
      OpenVZ itself doesn't complain about duplicate UUIDs since this
      parameter is only used by libvirt.
      31351c31
    • C
      Fix /domain/features setting in qemuParseCommandLine · 626dd518
      Christophe Fergeau 提交于
      Commit 5e6ce1 moved down detection of the ACPI feature in
      qemuParseCommandLine. However, when ACPI is detected, it clears
      all feature flags in def->features to only set ACPI. This used to
      be fine because this was the first place were def->features was set,
      but after the move this is no longer necessarily true because this
      block comes before the ACPI check:
      
      if (strstr(def->emulator, "kvm")) {
          def->virtType = VIR_DOMAIN_VIRT_KVM;
          def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
      }
      
      Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
      can always use |= when modifying def->features
      626dd518
    • E
      build: detect all improper uses of _("%s") · 0867a877
      Eric Blake 提交于
      The only useful translation of "%s" as a format string is "%s" (I
      suppose you could claim "%1$s" is also valid, but why bother).  So
      it is not worth translating; fixing this exposes some instances
      where we were failing to translate real error messages.  This makes
      the fix of commit 097da1ab more generic, as well as ensuring no
      future regressions.
      
      * cfg.mk (sc_prohibit_useless_translation): New rule.
      * src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
      * src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
      * src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
      * src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
      * src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
      0867a877
  2. 10 7月, 2012 9 次提交
  3. 09 7月, 2012 3 次提交
  4. 08 7月, 2012 1 次提交
  5. 06 7月, 2012 1 次提交
  6. 05 7月, 2012 12 次提交