The function, like others in our code, returns zero on success
and a negative value on error. However, there are two places in
xenconfig source code where we check for non-zero value. While
the function can't currently return a positive value, those
checks look okay, but does not really follow our style.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

... and consolidate the cmdline/extra/root parsing to facilitate doing
so.

The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).

On the formatting side switch to producing cmdline= instead of extra=.

Update a few tests and add serveral more.
  - test-cmdline is added to test the exclusive use of cmdline.
  - test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
    on the formatting side and now tests the exclusive use of cmdline=.
  - Tests are added for both paravirt and fullvirt where the .cfg uses
    extra= and (paravirt only) root=. These are format (xl->xml) only
    since the inverse will generate cmdline= hence is not a round trip
    (which was already true if using root=, which used to generate
    extra= on the way back).
  - Tests are added for both paravirt and fullvirt where the .cfg
    declares cmdline= as well as bogus extra= and (paravirt only) root=
    entries which should be ignored. Again these are format only tests
    since the inverse won't include the bogus lines.

The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.

In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

Add "Xen XL Config" to the virErrorDomain enum and use it in
src/xenconfig/xen_xl.c.

The virErrorDomain enum has VIR_FROM_XEN, VIR_FROM_XEND,
VIR_FROM_XENSTORE, VIR_FROM_SEXPR, and VIR_FROM_XENXM. Use
these elements in the corresponding .c files. While at it,
remove the VIR_FROM_THIS define in src/xenconfig/xenxs_private.h.

Commit ec63000a missed checking the return value of regcomp(),
which coverity promptly identified.

Both xm and xl config have long supported specifying vif rate
limiting, e.g.

vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]

Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add a unit test to check the conversion logic.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The xen sexpr config format has long supported specifying vif rate
limiting, e.g.

  (device
    (vif
      (mac '00:16:3e:1b:b1:47')
      (rate '10240KB/s')
      ...
    )
  )

Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add unit tests to check the conversion logic.

This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.

This patch partially reverts previous commit 91a00424 and moves the post
parse function to xenParseSxpr.  This update is required because xen
driver calls xenParseSxpr directly.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.

Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in s-expression parser/formatter.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in xm parser/formatter.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* from xenconfig/xen_common.c
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.

The new helper will simplify checking whether the domain config contains
inactive vCPUs.

To support further refactors replace all write access to def->maxvcpus
with a accessor function.

Only 'tsc' timer allows set mode and track is valid only for 'rtc' and
'platform' timers.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: NIshmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The name of the variable was misleading. Rename it and it's setting
accessor before other fixes.

Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.htmlSigned-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs

From xl.cfg950 man page:

spiceagent_mouse=BOOLEAN
Whether SPICE agent is used for client mouse mode. The default is
true (1) (turn on)

spicevdagent=BOOLEAN
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab
mouse by client, no mouse lag), automatic adjustment of screen
resolution, copy and paste (text and image) between client and domU.
It also requires vdagent service installed on domU o.s. to work.
The default is 0.

spice_clipboard_sharing=BOOLEAN
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled. The default is false (0).

So if spiceagent_mouse is enabled (client mouse mode) or
spice_clipboard_sharing is enabled, spicevdagent must be enabled.
Along with this change, s/spicedvagent/spicevdagent, set
spiceagent_mouse correctly, and add a test for these spice
features.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The logic related to spicedisable_ticketing and spicepasswd was
inverted.  As per man xl.cfg(5), 'spicedisable_ticketing = 1'
means no passwd is required.  On the other hand, a passwd is
required if 'spicedisable_ticketing = 0'.  Fix the logic and
produce and error if 'spicedisable_ticketing = 0' but spicepasswd
is not provided.  Also fix the spice cfg test file.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move formating of spice listenAddr to the section of code
where spice ports are formatted.  It is more logical to
format address and ports together.  Account for the change
in spice cfg test file by moving 'spicehost'.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

'graphics->' is a bit easier to read and type, and makes for
shorter lines than 'def->graphics[0]->'.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.

But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.

Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

In xl config, hvmloader is implied for hvm guests.  It is not
specified with the "kernel" option like xm config.  The "kernel"
option, along with "ramdisk" and "extra", is used for HVM direct
kernel boot.  Instead of using "kernel" option to populate
virDomainDef object's os.loader->path, use hvmloader discovered
when gathering capabilities.

This change required fixing initialization of capabilities in
the test utils and removing 'kernel = "/usr/lib/xen/boot/hvmloader"'
from the test config files.

xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.

Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config.  An unfortunate fallout is reordering of entries
in the test config files.

device_model is parsed in xenParseOS(), then later in
xenParseConfigCommon().  <emulator> is not part of <os>,
so makes sense to remove the parsing in xenParseOS().