Move common functions being used by the following
virQEMUCapsSupportsVmport commit.

Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.

Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.

Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id

Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.

The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When the guest agent channel gets hotplugged to a VM, libvirt would
still report that "QEMU guest agent is not configured" rather than
stating that the connection was not established yet.

Currently the code won't be able to connect to the agent after hotplug
but that will change in a later patch.

As the qemuFindAgentConfig() helper is quite helpful in this case move
it to a more usable place and export it.

virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.

https://bugzilla.redhat.com/show_bug.cgi?id=1213434

This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.

We need to check that qemu supports block jobs in multiple places. Add a
helper to do the check.

In some cases where the function does not need to access the private
data this helper may be used to retrieve the monitor object.

Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.

Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).

Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606
https://bugzilla.redhat.com/show_bug.cgi?id=1076708

Test changes:
* virtio-auto.args
  Filling out the port when just the controller is specified.
  switched from using
    maxport + 1
  to:
    first free port on the controller
* virtio-autoassign.args
  Filling out the address when no <address> is specified.
  Started using all the controllers instead of 0, also discards
  the bus value.
* xml -> xml output of virtio-auto
  The port assignment is no longer done as a part of XML parsing,
  so the unspecified values stay 0.

The automatic cpuset can be stored along with automatic nodeset and it
does not have to be recreated when used.

Whenever we fail to acquire a job, we can report how long ago it was
locked by another API.

https://bugzilla.redhat.com/show_bug.cgi?id=853839Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This is very helpful when we want to log and report why we could not
acquire a state change lock. Reporting what job keeps it locked helps
with understanding the issue. Moreover, after calling
virDomainGetControlInfo, it's possible to tell whether libvirt is just
stuck somewhere within the API (or it just forgot to cleanup the job) or
whether libvirt is waiting for QEMU to reply.

The error message will look like the following:

    # virsh resume cd
    error: Failed to resume domain cd
    error: Timed out during operation: cannot acquire state change lock
    (held by remoteDispatchDomainSuspend)

https://bugzilla.redhat.com/show_bug.cgi?id=853839Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.

When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.

The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.

Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.

While qemu may be prepared to do this libvirt is not. Forbid the block
ops until we fix our code.

Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.

To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.

Not just the DomainObj's private data.

Depending on the context, either error out if the domain
has disappeared in the meantime, or just ignore the value
to allow marking the function as ATTRIBUTE_RETURN_CHECK.

The domain might disappear during the time in monitor when
the virDomainObjPtr is unlocked, so the caller needs to check
if it's still alive.

Since most of the callers are going to need it, put the
check inside qemuDomainObjExitMonitor and return -1 if
the domain died in the meantime.

There is one problem that causes various errors in the daemon.  When
domain is waiting for a job, it is unlocked while waiting on the
condition.  However, if that domain is for example transient and being
removed in another API (e.g. cancelling incoming migration), it get's
unref'd.  If the first call, that was waiting, fails to get the job, it
unref's the domain object, and because it was the last reference, it
causes clearing of the whole domain object.  However, when finishing the
call, the domain must be unlocked, but there is no way for the API to
know whether it was cleaned or not (unless there is some ugly temporary
variable, but let's scratch that).

The root cause is that our APIs don't ref the objects they are using and
all use the implicit reference that the object has when it is in the
domain list.  That reference can be removed when the API is waiting for
a job.  And because each domain doesn't do its ref'ing, it results in
the ugly checking of the return value of virObjectUnref() that we have
everywhere.

This patch changes qemuDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds qemuDomObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked.  This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When requested in a later patch, the QMP command results are now
examined recursively.  As qemu_driver will eventually have to
read items out of the hash table as stored by this patch, the
computation of backing alias string is done in a shared location.

* src/qemu/qemu_domain.h (qemuDomainStorageAlias): New prototype.
* src/qemu/qemu_domain.c (qemuDomainStorageAlias): Implement it.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): Perform recursion.
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Update callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

Thanks to that we don't need to drag the pointer everywhere and future
code will get cleaner.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Move entering the job into the thread to simplify the program flow. Also
as the code holds a separate reference to the domain object some
conditions can be simplified.

After this patch qemuDomainObjTransferJob is no longer needed so this
patch removes it.

https://bugzilla.redhat.com/show_bug.cgi?id=1160084

As of b6d4dad1 (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).

Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:

virsh # domfsfreeze gentoo
Froze 1 filesystem(s)

virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance

virsh # domfsfreeze gentoo
Froze 1 filesystem(s)

virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

New qemu added a new event that is emitted when a virtio serial channel
is opened in the guest OS. This allows us to update the state of the
port in the output-only XML element.

This patch implements the monitor callbacks and necessary handlers to
update the state in the definition.

NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).

This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.

See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).

Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.

The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.

We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).

Reuse virStorageSourceIsEmpty and rename "force" argument to
"force_probe".

Mimic the "Disk" processing for 'rawio', but for a scsi_host hostdev
lun device.

Add new 'niothreadpids' and 'iothreadpids' to mimic the 'ncpupids' and
'vcpupids' that already exist.

Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Be consistent with naming of private defines. Also line up code
correctly in few places where the macro is used.

During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:

"entering monitor without asking for a nested job is dangerous"

The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.

This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.

https://bugzilla.redhat.com/show_bug.cgi?id=1130089Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add a wrapper that determines the correct uid and gid for a certain
storage file and domain.

As we are doing with the enum structures, a cleanup in "src/qemu/"
directory was done now. All the enums that were defined in the
header files were converted to typedefs in this directory. This
patch includes all the adjustments to remove conflicts when you do
this kind of change. "Enum-to-typedef"'s conversions were made in
"src/qemu/qemu_{capabilities, domain, migration, hotplug}.h".
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

Just code movement and rename.