With dynamic_ownership = 1 but no seclabels, RestoreChardevLabel
dereferences the NULL seclabel when checking if norelabel is set.

Remove this check, since it is already done in RestoreSecurityAllLabel
and if norelabel is set, RestoreChardevLabel is never called.

Each VM consists of a set of files in PCS: config, hard
disk images, log file, memory dump. All these files are stored
in a per-vm directory. When we create a new VM, we can ether specify
path to the VM or create the VM in a default path
(<default path>/<vm name>.pvm). This default path can be configured
with command
prlsrvctl user set --def-vm-home <path> command.

Currenty parallels driver creates VM in the same place, where first
hard disk is located. Let's change this logic and create VMs in
the default path. It will be much clearer and allow us to create
VMs without hard disks.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Disks support in this driver was implemented with an assumption,
that disk images can't be created by hand, without VM. So
complex storage driver was implemented with workaround.

This is not true, we can create new disks using ploop tool.
So the first step to reimplement disks support in parallels
driver is to do not use information from the storage driver,
until we will implement VIR_STORAGE_TYPE_VOLUME disks.

So after this patch disks can be added in the same way as
in any other driver: you create a disk image and then add
an entry to the XML definition of the domain with path to that
image file, for example:

<disk type='file' device='disk'>
  <driver type='ploop'/>
  <source file='/storage/harddisk1.hdd'/>
  <target dev='sda' bus='sata'/>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>

This patch makes parallels storage driver useless, but I'll fix it
later. Now you can create an image by hand, using ploop tool,
and then add it to some domain.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Set file format in virDomainDef structure to produce correct
XML in virDomainGetXMLDesc function.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Add VIR_STORAGE_FILE_PLOOP format. This format is used
to store disk images for virtual machines in PCS and containers
in PCS, OpenVZ and also in Parallels Desktop for Mac.

This format is described on OpenVZ site -
https://openvz.org/Ploop (together with ploop devices). It
consists of XML descriptor and one or more image files: base
image and deltas. Format of the image files described here:
https://openvz.org/Ploop/format.

This patch only adds VIR_STORAGE_FILE_PLOOP constant, consequent
patches will use it in parallels driver.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

The domain definition is clearly used a few lines
below so there's no need to mark @def as unused.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We allow a seclabel to be specified in the <source> element
of a chardev:

<serial type='file'>
  <source path='/tmp/serial.file'>
    <seclabel model='dac' relabel='no'/>
  </source>
</serial>

But we format it outside the source:

<serial type='file'>
  <source path='/tmp/serial.file'/>
  <target port='0'/>
    <seclabel model='dac' relabel='no'/>
</serial>

Move the formatting inside the source to fix this to make the
seclabel persistent across XML format->parse.

Introduced by commit f8b08d0e 'Add <seclabel> to character devices.'

Drop the 'Disk' from the name, as there is nothing disk-specific
about the function.

The DAC driver ignores the relabel='no' attribute in chardev config

  <serial type='file'>
    <source path='/tmp/jim/test.file'>
      <seclabel model='dac' relabel='no'/>
    </source>
    <target port='0'/>
  </serial>

This patch avoids labeling chardevs when relabel='no' is specified.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When relabel='no' at the domain level, there is no need to call
the hostdev relabeling functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=999301

The DAC driver ignores the relabel='no' attribute in disk config

  <disk type='file' device='floppy'>
    <driver name='qemu' type='raw'/>
    <source file='/some/path/floppy.img'>
      <seclabel model='dac' relabel='no'/>
    </source>
    <target dev='fda' bus='fdc'/>
    <readonly/>
  </disk>

This patch avoid labeling disks when relabel='no' is specified.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

If relabel='no' at the domain level, no need to attempt relabeling
in virSecurityDAC{Set,Restore}SecurityAllLabel().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Currently, the DAC security driver passes callback data as

    void params[2];
    params[0] = mgr;
    params[1] = def;

Clean this up by defining a structure for passing the callback
data.  Moreover, there's no need to pass the whole virDomainDef
in the callback as the only thing needed in the callbacks is
virSecurityLabelDefPtr.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

In switch statements, use enum types since it is safer when
adding new items to the enum.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Annotate some static function parameters with ATTRIBUTE_NONNULL
and remove checks for NULL inputs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

In a number of APIs, the text implied that a user might have
<target dev='xvda'/> - but common convention is to use "vda",
not "xvda".  For example, virDomainGetDiskErrors was correct,
while virDomainBlockStats was confusing.

* src/libvirt.c: Make examples consistent.
Signed-off-by: NEric Blake <eblake@redhat.com>

Don't leak keypath when we fail to kill a process
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

For internal structs, we might as well be type-safe and let the
compiler help us with less typing required on our part (getting
rid of casts is always nice).  In trying to use enums directly,
I noticed two problems in virstoragefile.h that can't be fixed
without more invasive refactoring: virStorageSource.format is
used as more of a union of multiple enums in storage volume
code (so it has to remain an int), and virStorageSourcePoolDef
refers to pooltype whose enum is declared in src/conf, but where
src/util can't pull in headers from src/conf.

* src/util/virstoragefile.h (virStorageNetHostDef)
(virStorageSourcePoolDef, virStorageSource): Use enums instead of
int for fields of internal types.
* src/qemu/qemu_command.c (qemuParseCommandLine): Cover all values.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Simplify clients.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskInternal): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name.  Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.

* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: NEric Blake <eblake@redhat.com>

Continuing the work of consistent enum cleanups; this time in
virstorageencryption.h.

* src/util/virstorageencryption.h (virStorageEncryptionFormat):
Convert to typedef, renaming to avoid collision with function.
(virStorageEncryptionSecret, virStorageEncryption): Directly use
enums.
Signed-off-by: NEric Blake <eblake@redhat.com>

The code had some todo's about adding 'vdi' to the list of
virStorageType, but we've already done that.

* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Use enum value for vdi type.
Signed-off-by: NEric Blake <eblake@redhat.com>

One caveat though, qemu-ga is expecting time and returning time
in nanoseconds. With all the buffering and propagation delay, the
time is already wrong once it gets to the qemu-ga, but there's
nothing we can do about it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Coverity complains about event being leaked in
qemuDomainCheckRemoveOptionalDisk. The best fix for it is to remove the
disk directly since we already know its index.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Remove ATTRIBUTE_UNUSED on several function parameters that are
actually used.

For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.

Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined

After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to snapshot (snapshot_conf) enums.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's better
to use a typedef for variable types, function types and other
usages. Other enumeration and folders will be changed to typedef's
in the future. Most of the files changed in this commit are related
to network filter (nwfilter_conf) enums.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

When qemu driver is polling for migration to finish (in
qemuMigrationWaitForCompletion), it may happen that another job allowed
during migration is running and if it does not finish within 30 seconds,
migration would be cancelled because of that. However, we can just
ignore the timeout and let the waiting loop try again later.

If an event fired at the end of migration is ever implemented in QEMU,
we can just wait for the event instead of polling for migration status
and libvirt will behave consistently, i.e., migration won't be cancelled
in case another job started during migration takes long time to finish.

For bug https://bugzilla.redhat.com/show_bug.cgi?id=1083238Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

As a side effect, the return value of qemuDomainObjEnterMonitorAsync is
not directly used as the return value of qemuProcess{Start,Stop}CPUs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If job queue is full or waiting for a job times out, the function
returns -2 so that it can be handled in a different way by callers.

The change is safe since all existing callers of
qemuDomainObjBeginNestedJob check the return value to be less than zero.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It's only used within qemu_domain.c.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If the compression program for external snapshot memory image isn't
found we exitted the function without terminating the domain job. This
caused the domain to be unusable.

The problem was introduced in commit 7df5093f.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097503

Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':

 - virDomainPCIAddressAsString;
 - virDomainPCIAddressBusSetModel;
 - virDomainPCIAddressEnsureAddr;
 - virDomainPCIAddressFlagsCompatible;
 - virDomainPCIAddressGetNextSlot;
 - virDomainPCIAddressReleaseSlot;
 - virDomainPCIAddressReserveAddr;
 - virDomainPCIAddressReserveNextSlot;
 - virDomainPCIAddressReserveSlot;
 - virDomainPCIAddressSetFree;
 - virDomainPCIAddressSetGrow;
 - virDomainPCIAddressSlotInUse;
 - virDomainPCIAddressValidate;

The only change here is function names, the implementation itself
stays untouched.

Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.

Introduce new files (domain_addr.[ch]) to provide
an API for domain device handling that could be
shared across the drivers.

A list of data types were extracted and moved there:

 qemuDomainPCIAddressBus -> virDomainPCIAddressBus
 qemuDomainPCIAddressBusPtr -> virDomainPCIAddressBusPtr
 _qemuDomainPCIAddressSet -> virDomainPCIAddressSet
 qemuDomainPCIAddressSetPtr -> virDomainPCIAddressSetPtr
 qemuDomainPCIConnectFlags -> virDomainPCIConnectFlags

Also, move the related definitions and macros.