- 12 11月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To enable virsh console (or equivalent) to be used remotely it is necessary to provide remote access to the /dev/pts/XXX pseudo-TTY associated with the console/serial/parallel device in the guest. The virStream API provide a bi-directional I/O stream capability that can be used for this purpose. This patch thus introduces a virDomainOpenConsole API that uses the stream APIs. * src/libvirt.c, src/libvirt_public.syms, include/libvirt/libvirt.h.in, src/driver.h: Define the new virDomainOpenConsole API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub API entry point
-
- 20 10月, 2010 3 次提交
-
-
由 Eric Blake 提交于
Although this patch adds a distinction between maximum vcpus and current vcpus in the XML, the values should be identical for all drivers at this point. Only in subsequent per-driver patches will a distinction be made. In general, virDomainGetInfo should prefer the current vcpus. * src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned short, to match virDomainGetInfo limit. Add maxvcpus member. * src/conf/domain_conf.c (virDomainDefParseXML) (virDomainDefFormat): parse and print out vcpu details. * src/xen/xend_internal.c (xenDaemonParseSxpr) (xenDaemonFormatSxpr): Manage both vcpu numbers, and require them to be equal for now. * src/xen/xm_internal.c (xenXMDomainConfigParse) (xenXMDomainConfigFormat): Likewise. * src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise. * src/openvz/openvz_conf.c (openvzLoadDomains): Likewise. * src/openvz/openvz_driver.c (openvzDomainDefineXML) (openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise. * src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise. * src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig): Likewise. * src/qemu/qemu_conf.c (qemuBuildSmpArgStr) (qemuParseCommandLineSmp, qemuParseCommandLine): Likewise. * src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise. * src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
-
由 Eric Blake 提交于
Note - this wrapping is completely mechanical; the old API will function identically, since the new API validates that the exact same flags are provided by the old API. On a per-driver basis, it may make sense to have the old API pass a different set of flags, but that should be done in the per-driver patch that implements the full range of flag support in the new API. * src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus): Move guts... (esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new functions. (esxDriver): Trivially support the new API. * src/openvz/openvz_driver.c (openvzDomainSetVcpus) (openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus) (openvzDomainGetVcpusFlags, openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDomainSetCPU) (phypDomainSetVcpusFlags, phypGetLparCPUMAX) (phypDomainGetVcpusFlags, phypDriver): Likewise. * src/qemu/qemu_driver.c (qemudDomainSetVcpus) (qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus) (qemudDomainGetVcpusFlags, qemuDriver): Likewise. * src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags) (testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainSetVcpus) (vboxDomainSetVcpusFlags, virDomainGetMaxVcpus) (virDomainGetVcpusFlags, virDriver): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainSetVcpus) (xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus) (xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus) (xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus) (xenapiDomainGetVcpusFlags, xenapiDriver): Likewise. (xenapiError): New helper macro.
-
由 Eric Blake 提交于
* src/driver.h (virDrvDomainSetVcpusFlags) (virDrvDomainGetVcpusFlags): New typedefs. (_virDriver): New callback members. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 13 10月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in libvirt.h.in to placate apibuild.py. Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters in the Python bindings and add both to the libvirtMethods array. Update remote_protocol-structs to placate make syntax-check. Undo unintended modifications in vboxDomainGetInfo. Update the function table of the VirtualBox and XenAPI drivers.
-
由 Nikunj A. Dadhania 提交于
Adding parsing code for memory tunables in the domain xml file also change the internal define structures used for domain memory informations Adds a new specific test
-
- 24 8月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/xenapi/xenapi_driver.c (xenapiDomainGetInfo): Avoid using XEN_VM_POWER_STATE_UNKNOWN, which disappeared in newer xenapi. * src/xenapi/xenapi_utils.c (mapPowerState): Likewise.
-
- 31 7月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 30 7月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 24 7月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Add the library entry point for the new virDomainQemuMonitorCommand() entry point. Because this is not part of the "normal" libvirt API, it gets its own header file, library file, and will eventually get its own over-the-wire protocol later in the series. Changes since v1: - Go back to using the virDriver table for qemuDomainMonitorCommand, due to linking issues - Added versioning information to the libvirt-qemu.so Changes since v2: - None Changes since v3: - Add LGPL header to libvirt-qemu.c - Make virLibConnError and virLibDomainError macros instead of function calls Changes since v4: - Move exported symbols to libvirt_qemu.syms Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 15 6月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* src/esx/esx_driver.c (esxDomainCreate): Move guts... (esxDomainCreateWithFlags): ...to new function. (esxDriver): Trivially support the new API. * src/lxc/lxc_driver.c (lxcDomainStart, lxcDomainStartWithFlags) (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDomainStart) (oneDomainStartWithFlags, oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreate) (openvzDomainCreateWithFlags, openvzDriver): Likewise. * src/qemu/qemu_driver.c (qemudDomainStart) (qemudDomainStartWithFlags, qemuDriver): Likewise. * src/test/test_driver.c (testDomainCreate) (testDomainCreateWithFlags, testDriver): Likewise. * src/uml/uml_driver.c (umlDomainStart, umlDomainStartWithFlags) (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreate) (vboxDomainCreateWithFlags, Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainCreate) (xenUnifiedDomainCreateWithFlags, xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreate) (xenapiDomainCreateWithFlags, xenapiDriver): Likewise.
-
由 Eric Blake 提交于
Persistent domain creation needs the same features as transient domains, but virDomainCreate lacks the flags argument present in virDomainCreateXML. virDomainCreateFlags is already claimed as a public enum, so we have to break convention and expose virDomainCreateWithFlags. * include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add. * src/driver.h (virDrvDomainCreateWithFlags): Internal API. * src/libvirt.c (virDomainCreateWithFlags): Glue public API to driver API. * src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 09 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add VIR_DOMAIN_START_PAUSED. * src/libvirt.c (virDomainCreateXML): Update documentation. * src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag as unimplemented. * src/opennebula/one_driver.c (oneDomainCreateAndStart): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise. * src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise. * src/qemu/qemu_driver.c (qemudDomainCreate): Likewise. * src/test/test_driver.c (testDomainCreateXML): Likewise. * src/uml/uml_driver.c (umlDomainCreate): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise. * src/xen/xend_internal.c (xenDaemonCreateXML): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
-
- 30 4月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
This defines the internal driver API and stubs out each driver * src/driver.h: Define virDrvDomainGetBlockInfo signature * src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
-
- 05 4月, 2010 2 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Matthias Bolte 提交于
Commit 15c647a9 added the new managedsave entries to all driver structs except the XenAPI one.
-
- 01 4月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
virParseVersionString uses virStrToLong_ui instead of sscanf. This also fixes a bug in the UML driver, that always returned 0 as version number. Introduce STRSKIP to check if a string has a certain prefix and to skip this prefix.
-
- 31 3月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* cfg.mk (msg_gen_function): Add xenapiSessionErrorHandler. * po/POTFILES.in: Add src/xenapi/xenapi_driver.c * src/xenapi/xenapi_driver.c: Mark strings for translation. * src/xenapi/xenapi_utils.c (xenapiUtil_ParseQuery):
-
- 26 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
The current virDomainAttachDevice API can be (ab)used to change the media of an existing CDROM/Floppy device. Going forward there will be more devices that can be configured on the fly and overloading virDomainAttachDevice for this is not too pleasant. This patch adds a new virDomainUpdateDeviceFlags() explicitly just for modifying existing devices. * include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags * src/driver.h: Internal API for virDomainUpdateDeviceFlags * src/libvirt.c, src/libvirt_public.syms: Glue public API to driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add stubs for new driver entry point
-
由 Daniel P. Berrange 提交于
The current API for domain events has a number of problems - Only allows for domain lifecycle change events - Does not allow the same callback to be registered multiple times - Does not allow filtering of events to a specific domain This introduces a new more general purpose domain events API typedef enum { VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */ ...more events later.. } int virConnectDomainEventRegisterAny(virConnectPtr conn, virDomainPtr dom, /* Optional, to filter */ int eventID, virConnectDomainEventGenericCallback cb, void *opaque, virFreeCallback freecb); int virConnectDomainEventDeregisterAny(virConnectPtr conn, int callbackID); Since different event types can received different data in the callback, the API is defined with a generic callback. Specific events will each have a custom signature for their callback. Thus when registering an event it is neccessary to cast the callback to the generic signature eg int myDomainEventCallback(virConnectPtr conn, virDomainPtr dom, int event, int detail, void *opaque) { ... } virConnectDomainEventRegisterAny(conn, NULL, VIR_DOMAIN_EVENT_ID_LIFECYCLE, VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback) NULL, NULL); The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast to the generic signature * include/libvirt/libvirt.h.in: Define new APIs for registering domain events * src/driver.h: Internal driver entry points for new events APIs * src/libvirt.c: Wire up public API to driver API for events APIs * src/libvirt_public.syms: Export new APIs * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out new API entries
-
- 20 3月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 17 3月, 2010 4 次提交
-
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Use virRequestUsername and virRequestPassword.
-
由 Jim Meyering 提交于
* src/xenapi/xenapi_driver.c (xenapiOpen): Remove useless-if-before-free. * po/POTFILES.in: Add src/xenapi/xenapi_utils.c.
-
- 15 3月, 2010 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Sharadha Prabhakar 提交于
-