- 24 1月, 2013 3 次提交
-
-
由 Peter Krempa 提交于
This will allow storing additional topology data in the NUMA topology definition. This patch changes the storage type and fixes fallout of the change across the drivers using it. This patch also changes semantics of adding new NUMA cell information. Until now the data were re-allocated and copied to the topology definition. This patch changes the addition function to steal the pointer to a pre-allocated structure to simplify the code.
-
由 Peter Krempa 提交于
-
由 Viktor Mihajlovski 提交于
The way in that memory balloon suppression was handled for S390 is flawed for a number or reasons. 1. Just preventing the default balloon to be created in the case of VIR_ARCH_S390[X] is not sufficient. An explicit memballoon element in the guest definition will still be honored, resulting both in a -balloon option and the allocation of a PCI bus address, neither being supported. 2. Prohibiting balloon for S390 altogether at a domain_conf level is no good solution either as there's work in progress on the QEMU side to implement a virtio-balloon device, although in conjunction with a new machine type. Suppressing the balloon should therefore be done at the QEMU driver level depending on the present capabilities. Therefore we remove the conditional suppression of the default balloon in domain_conf.c. Further, we are claiming the memballoon device for virtio-s390 during device address assignment to prevent it from being considered as a PCI device. Finally, we suppress the generation of the balloon command line option if this is a virtio-s390 machine. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 23 1月, 2013 6 次提交
-
-
由 Peter Krempa 提交于
virNetworkObjUpdateParseFile used ',' as the termination character for virBitmapParse. This would break if an non-contiguous range would be parsed.
-
由 Daniel P. Berrange 提交于
Although the nwfilter driver skips startup when running in a session libvirtd, it did not skip reload or shutdown. This caused errors to be reported when sending SIGHUP to libvirtd, and caused an abort() in libdbus on shutdown due to trying to remove a dbus filter that was never added
-
由 Alon Levy 提交于
Adds a "ram" attribute globally to the video.model element, that changes the resulting qemu command line only if video.type == "qxl". <video> <model type='qxl' ram='65536' vram='65536' heads='1'/> </video> That attribute gets a default value of 64*1024. The schema is unchanged for other video element types. The resulting qemu command line change is the addition of -global qxl-vga.ram_size=<ram>*1024 or -global qxl.ram_size=<ram>*1024 For the main and secondary qxl devices respectively. The default for the qxl ram bar is 64*1024 kilobytes (the same as the default qxl vram bar size).
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
The count of vCPUs for a domain is extracted as a usingned long variable but is stored in a unsigned short. If the actual number was too large, a faulty number was stored.
-
由 John Ferlan 提交于
Resolve a couple of instances where variables were not initialized prior to potential VIR_FREE call in cleanup path.
-
- 22 1月, 2013 1 次提交
-
-
由 John Ferlan 提交于
Commit id a994ef2d changed the mechanism to store/update the default security label from using disk->seclabels[0] to allocating one on the fly. That change allocated the label, but never saved it. This patch will save the label. The new virDomainDiskDefAddSecurityLabelDef() is a copy of the virDomainDefAddSecurityLabelDef().
-
- 18 1月, 2013 1 次提交
-
-
由 Laine Stump 提交于
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=895294 The symptom was that attempts to modify a network device using virDomainUpdateDeviceFlags() would fail if the original device had a <boot> element (e.g. "<boot order='1'/>"), even if the updated device had the same <boot> element. Instead, the following error would be logged: cannot modify network device boot index setting It's true that it's not possible to change boot order (internally known as bootIndex) of a live device; qemuDomainChangeNet checks for that, but the problem was that the information it was checking was incorrect. Explanation: When a complete domain is parsed, a global (to the domain) "bootMap" is passed down to the parse for each device; the bootMap is used to make sure that devices don't have conflicting settings for their boot orders. When a single device is parsed by itself (as in the case of virDomainUpdateDeviceFlags), there is no global bootMap that would be appropriate to send, so NULL is sent instead. However, although the lowest level function that parses just the boot order *does* simply skip the sanity check in that case, the next higher level "virDomainDeviceInfoParseXML" function refuses to call down to the lower "virDomainDeviceBootParseXML" if bootMap is NULL. So, the boot order is never set in the "new" device object, and when it is compared to the original (which does have a boot order), they don't match. The fix is to patch virDomainDeviceInfoParseXML to not care about bootMap, and just always call virDomainDeviceInfoBootParseXML whenever there is a <boot> element. When we are only parsing a single device, we don't care whether or not any specified boot order is consistent with the rest of the domain; we will always do this check later (in the current case, we do it by verifying that the net bootIndex exactly matches the old bootIndex).
-
- 17 1月, 2013 3 次提交
-
-
由 Guido Günther 提交于
that broke the build like: CC libvirt_conf_la-domain_conf.lo conf/domain_conf.c: In function 'virDomainVcpuPinAdd': conf/domain_conf.c:11920:29: error: 'vpcupin' undeclared (first use in this function) conf/domain_conf.c:11920:29: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [libvirt_conf_la-domain_conf.lo] Error 1
-
由 Ján Tomko 提交于
Fix the leak of vcpupin on failure to allocate cpumask and the leak of cpumask if we fail to expand vcpupin_list.
-
- 16 1月, 2013 2 次提交
-
-
由 Daniel P. Berrange 提交于
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes all require a mutex, so can be switched to use virObjectLockable Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Currently all classes must directly inherit from virObject. This allows for arbitrarily deep hierarchy. There's not much to this aside from chaining up the 'dispose' handlers from each class & providing APIs to check types. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 10 1月, 2013 2 次提交
-
-
由 Guannan Ren 提交于
-
由 Guannan Ren 提交于
Add an optional 'type' attribute to <target> element of serial port device. There are two choices for its value, 'isa-serial' and 'usb-serial'. For backward compatibility, when attribute 'type' is missing the 'isa-serial' will be chosen as before. Libvirt XML sample <serial type='pty'> <target type='usb-serial' port='0'/> <address type='usb' bus='0' port='1'/> </serial> qemu commandline: qemu ${other_vm_args} \ -chardev pty,id=charserial0 \ -device usb-serial,chardev=charserial0,id=serial0,bus=usb.0,port=1
-
- 08 1月, 2013 2 次提交
-
-
由 Eric Blake 提交于
gcc 4.1.2 on RHEL 5 warned: conf/network_conf.c:3136: warning: 'foundIdx' may be used uninitialized in this function The warning is spurious, but initializing the variable doesn't hurt. * src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Silence unused variable warning.
-
由 J.B. Joret 提交于
The SCLP console is the native console type for s390 and is preferred over the virtio console as it doesn't require special drivers and is more efficient. Recent versions of QEMU come with SCLP support which is hereby enabled. The new target types 'sclp' and 'sclplm' can be used to specify a SCLP console. Adding documentation, domain schema and XML processing support. Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com> Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 07 1月, 2013 1 次提交
-
-
由 Osier Yang 提交于
Like "rawio", "sgio" is only allowed for block disk of device type "lun". It doesn't default disk->sgio to "filtered" when parsing, as it won't be able to distinguish explicitly requested "filtered" and a default "filtered" in driver then. We have to error out for explicit request when the kernel doesn't support the new sysfs knob "unpriv_sgio", however, for defaulted "filtered", we can just ignore it if the kernel doesn't support "unpriv_sgio".
-
- 05 1月, 2013 5 次提交
-
-
由 Peter Krempa 提交于
Allow to use definition objects with this predicate function.
-
由 John Eckersberg 提交于
This also changes the function signature to take a virDomainChrSourceDefPtr instead of just a path, since it needs to differentiate behavior based on source->type.
-
由 John Eckersberg 提交于
The functionality provided in virchrdev.c (previously virconsole.c) is applicable to other types of character devices besides consoles, such as channels. This patch is just code motion, renaming things such as "console" or "pty", instead using more general terms such as "character device" or "device path".
-
由 John Eckersberg 提交于
This is just code motion, in preparation to rename identifiers to be less console-specific.
-
由 Eric Blake 提交于
gcc -O2 complained: ../../src/conf/network_conf.c: In function 'virNetworkDefUpdateDNSSrv': ../../src/conf/network_conf.c:3232: error: 'foundIdx' may be used uninitialized in this function [-Wuninitialized] It turned out to be a spurious warning (we didn't use foundIdx unless foundCt was non-zero). But in investigating that, I noticed a worse problem: we were using 'if (foundCt > 1)', but since foundCt was bool, it could never be > 1. * src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Use correct type. (virNetworkDefUpdateDNSSrv): Likewise, and silence compiler warning.
-
- 21 12月, 2012 14 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To bring in line with new naming practice, rename the= src/util/cgroup.{h,c} files to vircgroup.{h,c} Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Li Zhang 提交于
Cirrus VGA model is not supported on ppc64 currently. It needs to set std VGA model as the default model. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
-