The function qemuDomainGetHostdevPath() is using VIR_FREE to free the
paths stored in tmpPaths. Both syntax analyzer are reporting a warning
about this. Replacing the old method to function
virStringListFreeCount() fixes the warnings/errors.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This commit includes new test cases to cover LXC version 3.0 and higher.
This LXC version rebased some settings entries and deprecated other ones.
As we support both, we should include tests to minimize problems with
integration between them.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch introduce the new settings for LXC 3.0 or higher. The older
versions keep the compatibility to deprecated settings for LXC, but
after release 3.0, the compatibility was removed. This commit adds the
support to the refactored settings.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add a test to fetch the GetMemoryStat output. This only gets
data for v1 only right now since the v2 data from commit 61ff6021
is rather useless returning all 0's. The v1 data was originally
added in commit d1452470.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Commit 901d2b9c introduced virCgroupGetMemoryStat and replaced
the LXC virLXCCgroupGetMemStat logic in commit e634c7cd. However,
in doing so the replacement wasn't exact as the LXC logic used
getline() to process the cgroup controller data, while the new
virCgroupGetMemoryStat used "memory.stat" manual buffer read/
processing which neglected to forward through @line in order
to read each line in the output.

To fix that, we should be sure to carry forward the @line value
for each line read updating it beyond that current @newLine value
once we've calculated the values that we want.
Signed-off-by: NPeter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1631622

If polkit authentication is enabled, an attempt to open
the connection failed during virAccessDriverPolkitGetCaller
when the call to virIdentityGetCurrent returned NULL resulting
in the errors:

  virAccessDriverPolkitGetCaller:87 : access denied:
  Policy kit denied action org.libvirt.api.connect.getattr from <anonymous>

Because qemuProcessReconnect runs in a thread during
daemonRunStateInit processing it doesn't have the thread
local identity. Thus when the virGetConnectNWFilter is
called as part of the qemuProcessFiltersInstantiate when
virDomainConfNWFilterInstantiate is run the attempt to get
the idenity fails and results in the anonymous error above.

To fix this, let's grab/use the virIdenityPtr of the process
that will be creating the thread, e.g. what daemonRunStateInit
has set and use that for our thread. That way any other similar
processing that uses/requires an identity for any other call
that would have previously been successfully run won't fail in
a similar manner.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1631606

Changes made to manage and utilize a secondary connection
driver to APIs outside the scope of the primary connection
driver have resulted in some confusion processing polkit rules
since the simple "access denied" error message doesn't provide
enough of a clue when combined with the "authentication failed:
access denied by policy" as to which connection driver refused
or failed the ACL check.

In order to provide some context, let's modify the existing
"access denied" error returned from the various vir*EnsureACL
API's to provide the connection driver name that is causing
the failure. This should provide the context for writing the
polkit rules that would allow access via the driver, but yet
still adhere to the virAccessManagerSanitizeError commentary
regarding not telling the user why access was denied.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit ccc72d5c.

Based on upstream comment to a follow-up patch, this didn't take the
right approach and the right thing to do is revert and rework.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Missed during review and surprisingly my run through Coverity also
didn't see this. I only noticed it when reading the code while fixing
the build breaker for commit 36780a86.

With all those continues we would leak @stats.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Fix a broken non-Linux build to use the !virFileIsDir instead
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Refactoring qemuDomainGetStatsCpu, make it possible to add
more CPU statistics.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add functions for creating, destroying, reconnecting resctrl
monitor in qemu according to the configuration in domain XML.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduced virDomainResctrlNew to do the most part of virDomainResctrlAppend
and move the operation of appending resctrl to @def->resctrls out of
function.

Rather than rely on virDomainResctrlAppend to perform the allocation, move
the onus to the caller and make use of virBitmapNewCopy for @vcpus and
virObjectRef for @alloc, thus removing the need to set each to NULL after the
call.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interfaces monitor group to support operations such
as GetID, SetID, Remove, SetAlloc, etc.

Implement the internal virResctrlMonitorGetStats to fetch all
the statistical data and the virResctrlMonitorGetCacheOccupancy
in order to fetch the cache specific "llc_occupancy" value.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Refactor virResctrlAllocSetID generating an error if an attempt
is made to overwrite the existing value.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for creating the resource monitoring group according
to '@virResctrlMonitor->path'.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The code for creating resctrl allocation group could be reused
for monitoring group, refactor it for reuse in the later patch.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for adding task PID to the monitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The code of adding PID to the allocation could be reused, refactor it
for later reuse.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add interface for resctrl monitor to determine the path.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The code for determining resctrl allocation path could be reused
for monitor. Refactor it for reuse.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Cache Monitoring Technology (aka CMT) provides the capability
to report cache utilization information of system task.

This patch introduces the concept of resctrl monitor through
data structure virResctrlMonitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Refactor schemas and virresctrl to support optional <cache> element
in <cachetune>.

Later, the monitor entry will be introduced and to be placed
under <cachetune>. Either cache entry or monitor entry is
an optional element of <cachetune>.

An cachetune has no <cache> element is taking the default resource
allocating policy defined in '/sys/fs/resctrl/schemata'.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When no server name is provided in the URI, modern versions of libxml2
will set the port to '-1'. This is a change from behaviour with earlier
versions which set it to 0.

Libvirt expects the port to be 0 in these cases and as a result we get a
bug when connecting to URIs which lack a server name:

$ virsh  -c test+ssh:///default list
error: failed to connect to the hypervisor
error: Cannot recv data: Bad port '-1': Connection reset by peer

This libxml2 change was attempting to fix another bug identified by
libvirt where it didn't roundtrip URIs correctly in:

  https://github.com/GNOME/libxml2/commit/beb7281055dbf0ed4d041022a67c6c5cfd126f25

Essentially libxml2 was not expecting apps to look at the URI port
field when the server name is not provided. This was a reasonable
assumption, but none the less libvirt did look at it :-)

The fix is to ensure we explicitly set port to 0 when server name
is not present, avoiding undefined behaviour for the port field in
libxml2.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.

This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

When libvirt configuration includes '--with-apparmor-profiles', the
make uninstall target fails

make[1]: Entering directory '/home/jim/upstream/libvirt/examples'
 ( cd '/etc/apparmor.d//abstractions' && rm -f libvirt-qemu libvirt-lxc )
 ( cd '/etc/apparmor.d/' && rm -f usr.lib.libvirt.virt-aa-helper usr.sbin.libvirtd )
make[1]: *** No rule to make target 'uninstall-apparmor-local', needed by
'uninstall-local'.  Stop.

Add missing 'uninstall-apparmor-local' target to the examples Makefile.am.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Return -1 and report an error message if no transaction is set and
virSecuritySELinuxTransactionCommit is called.

The function description of virSecuritySELinuxTransactionCommit says:

  "Also it is considered as error if there's no transaction set and this
   function is called."
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

In 4674fc6a I've implemented transactions for selinux driver.
Well, now that I am working in this area I've noticed a subtle
bug: @ret is initialized to 0 instead of -1. Facepalm.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

As it's currently impossible for us to create new automated
builds on Docker Hub (see [1]), and quay.io doesn't suffer
from the same problem while still having all the feature we
need, switch to the latter.

[1] https://github.com/docker/hub-feedback/issues/1676Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

VFIO AP has a limitation on a single device per domain, however, when
commit 11708641 added the support for vfio-ap, check for this limitation
was performed as part of the post parse code. Generally, checks like that
should be performed within the driver's validation callback to eliminate
any slight chance of failing in post parse, which could potentially
result in the domain XML config vanishing.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

Since we'll need to validate other models apart from VFIO PCI too,
having a helper for each model should keep the code base cleaner.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

The gotShutdown bool has been redundant since we started setting
VIR_DOMAIN_SHUTDOWN state after receiving SHUTDOWN event from QEMU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If gotShutdown is true, the domain state cannot be running because of
the following code in qemuProcessHandleShutdown:

    priv->gotShutdown = true;

    VIR_DEBUG("Transitioned guest %s to shutdown state",
              vm->def->name);
    virDomainObjSetState(vm,
                         VIR_DOMAIN_SHUTDOWN,
                         VIR_DOMAIN_SHUTDOWN_UNKNOWN);
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

On aarch64, lauch vm with the follow configuration:

<interface type="hostdev" managed="yes">
  <mac address="fa:16:3e:14:41:00"/>
  <source>
    <address type="pci" domain="0x0000" bus="0x01" slot="0x0b" function="0x2"/>
  </source>
</interface>

libvirtd will crash when accessing net->model.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

If qemuDomainSnapshotDiscard() fails for any reason (rare,
but possible with an ill-timed ENOMEM or if
qemuDomainSnapshotForEachQcow2() has problems talking to the
qemu guest monitor), then an attempt to retry the snapshot
deletion API will crash because we didn't undo the effects
of virDomainSnapshotDropParent() temporarily rearranging the
internal list structures, and the second attempt to drop
parents will dereference NULL.  Fix it by instead noting that
there are only two callers to qemuDomainSnapshotDiscard(),
and only one of the two callers wants the parent to be updated;
thus we can move the call to virDomainSnapshotDropParent()
into a code path that only gets executed on success.
Signed-off-by: NEric Blake <eblake@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

In accordance with our platform support policy, now that
Fedora 29 is out we no longer support building on Fedora 27.

This allows us to remove a few version checks.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>