Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 17 12月, 2014 4 次提交
    • M
      qemu: Add missing goto error in qemuRestoreCgroupState · 86759ec6
      由 Martin Kletzander 提交于 
      Commit af2a1f05 tried clearly separating each condition in
qemuRestoreCgroupState() for the sake of readability, however somehow
one condition body was missing.  That means that the body of the next
condition got executed only if both of there were true, which is
impossible, thus resulting in a dead code and a logic error.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      86759ec6
    • M
      conf: Fix invalid condition when parsing storage owner · 57c008f8
      由 Martin Kletzander 提交于 
      In commit d2632d60 we agreed taht we want the parsed uid to properly
overflow but only to -1, however the value was read into long and then
wrapped into uid_t.  That meaned it failed on 32-bit systems.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      57c008f8
    • J
      virstoragefile: Have virStorageFileResize use safezero · 18f03166
      由 John Ferlan 提交于 
      Currently virStorageFileResize() function uses build conditionals to
choose either the posix_fallocate() or syscall(SYS_fallocate) with no
fallback in order to preallocate the space in the newly resized file.

Since the safezero code has a similar set of conditionals modify the
resize and safezero code in order to allow the resize logic to make use
of safezero to unify the look/feel of the code paths.

Add a new boolean (resize) to safezero() to make the optional decision
whether to try syscall(SYS_fallocate) if the posix_fallocate fails because
HAVE_POSIX_FALLOCATE is not defined (eg, return -1 and errno == 0).

Create a local safezero_sys_fallocate in order to handle the resize
code paths that support that.  If not present, the set errno = ENOSYS
in order to allow the caller to handle the failure scenarios.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
      18f03166
    • J
      virfile: Refactor safezero · 214c687b
      由 John Ferlan 提交于 
      Currently build conditionals decide which of two safezero() functions
should be built - either the posix_fallocate() or mmap() with a fallback
to a slower safewrite() algorithm in order to preallocate space in a raw file.

This patch will refactor safezero to utilize static functions for either
posix_fallocate or mmap/safewrite. The build conditional still exist, but
are only for shorter sections of code.

The posix_fallocate path will make use of the ret/errno setting to contain
the logic for safezero to decide whether it needs to fallback to other
algorithms. A return of -1 with errno not changed will indicate the conditional
is not present; otherwise, a return of -1 with errno change indicates the
call was made and it failed (no functional difference to current algorithm).

The mmap/safewrite option changes only slightly to handle the ftruncate
failure for mmap. That is, previously if the ftruncate failed, there was
no fallback to the slow safewrite option.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
      214c687b
  3. 16 12月, 2014 12 次提交
  5. 15 12月, 2014 14 次提交
  7. 14 12月, 2014 2 次提交
    • L
      qemu: add a qemuInterfaceStopDevices(), called when guest CPUs stop · c5a54917
      由 Laine Stump 提交于 
      We now have a qemuInterfaceStartDevices() which does the final
activation needed for the host-side tap/macvtap devices that are used
for qemu network connections. It will soon make sense to have the
converse qemuInterfaceStopDevices() which will undo whatever was done
during qemuInterfaceStartDevices().

A function to "stop" a single device has also been added, and is
called from the appropriate place in qemuDomainDetachNetDevice(),
although this is currently unnecessary - the device is going to
immediately be deleted anyway, so any extra "deactivation" will be for
naught. The call is included for completeness, though, in anticipation
that in the future there may be some required action that *isn't*
nullified by deleting the device.

This patch is a part of a more complete fix for:

  https://bugzilla.redhat.com/show_bug.cgi?id=1081461
      c5a54917
    • L
      qemu: always call qemuInterfaceStartDevices() when starting CPUs · 879c13d6
      由 Laine Stump 提交于 
      The patch that added qemuInterfaceStartDevices() (upstream commit
82977058) had an extra conditional to
prevent calling it if the reason for starting the CPUs was
VIR_DOMAIN_RUNNING_UNPAUSED or VIR_DOMAIN_RUNNING_SAVE_CANCELED.  This
was put in by the author as the result of a reviewer asking if it was
necessary to ifup the interfaces in *all* occasions (because these
were the two cases where the CPU would have already been started (and
stopped) once, so the interface would already be ifup'ed).

It turns out that, as long as there is no corresponding
qemuInterfaceStopDevices() to ifdown the interfaces anytime the CPUs
are stopped, neglecting to ifup when reason is RUNNING_UNPAUSED or
RUNNING_SAVE_CANCELED doesn't cause any problems (because it just
happens that the interface will have already been ifup'ed by a prior
call when the CPU was previously started for some other reason).

However, it also doesn't *help*, and there will soon be a
qemuInterfaceStopDevices() function which *will* ifdown these
interfaces when the guest CPUs are stopped, and once that is done, the
interfaces will be left down in some cases when they should be up (for
example, if a domain is paused and then unpaused).

So, this patch is removing the condition in favor of always calling
qemuInterfaeStartDevices() when the guest CPUs are started.

This patch (and the aforementioned patch) resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=1081461
      879c13d6
  9. 13 12月, 2014 3 次提交
    • M
      qemu: avoid rare race when undefining domain · c7d1c139
      由 Martin Kletzander 提交于 
      When one domain is being undefined and at the same time started, for
example, there is a possibility of a rare problem occuring.

 - Thread 1 does virDomainUndefine(), has the lock, checks that the
   domain is active and because it's not, calls
   virDomainObjListRemove().

 - Thread 2 does virDomainCreate() and tries to lock the domain.

 - Thread 1 needs to lock domain list in order to remove the domain from
   it, but must unlock domain first (proper order is to lock domain list
   first and the domain itself second).

 - Thread 2 grabs the lock, starts the domain and releases the lock.

 - Thread 1 grabs the lock and removes the domain from list.

With this patch:

 - The undefining domain gets marked as "to undefine" before it is
    unlocked.

 - If domain is found in any of the search APIs, it's returned only if
   it is not marked as "to undefine".  The check is done while the
   domain is locked.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150505Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      c7d1c139
    • L
      conf: Ignore device address for model=none usb controller and memballon · f6f4bd10
      由 Luyao Huang 提交于 
      It make no sense at all to have it there.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
      f6f4bd10
    • C
      Avoid getting '-1:-1' in devices cgroup list · 5acbb8f9
      由 Cédric Bosdonnat 提交于 
      When calling virCgroupAllowAllDevices we get these invalid entries
in the device cgroup config.
    b -1:-1 rw
    c -1:-1 rw
Check for positive values before outputting the major and minor to
avoid that.
      5acbb8f9
  11. 12 12月, 2014 1 次提交
  13. 11 12月, 2014 4 次提交