- 03 9月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
* docs/schemas/domain.rng: Add <serial> element to disks * src/domain_conf.h, src/domain_conf.c: XML parsing and formatting for disk serial numbers * src/qemu_conf.c: Set serial number when launching guests * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args, tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add serial number to XML test
-
由 Daniel P. Berrange 提交于
Add option to domain XML for <memoryBacking> <hugepages/> </memoryBacking> * configure.in: Add check for mntent.h * qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf Add 'hugetlbfs_mount' config parameter * src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU, and pass it when hugepages are requested. Load hugetlbfs_mount config parameter, search for mount if not given. * src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown. Create directory for QEMU hugepage usage, chowning if required. * docs/formatdomain.html.in: Document memoryBacking/hugepages elements * docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema * src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint helper API * tests/qemuhelptest.c: Add -mem-path constants * tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage handling * tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml, tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for hugepage tests
-
- 14 8月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
PCI device assignment is only supported in KVM's fork of qemu, so we should really detect its availability and give a nice error if its not supported. * src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating that the -pcidevice command line option is available * tests/*: update the tests
-
- 22 7月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
We need these so that we can remove the devices via the monitor. * src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef * src/domain_conf.c: free nic_name and hostnet_name * src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has support for the param and pass the names on the command line * tests/qemuxml2argv*: add a test for this
-
- 10 7月, 2009 2 次提交
-
-
由 Mark McLoughlin 提交于
We keep support for the pty based monitor so that we can re-connect to VMs started by older versions of libvirtd. * src/domain_conf.c: handle formatting and parsing unix monitors * src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor pty path searching from qemudFindCharDevicePTYs(), switch qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix monitor * tests/qemuxml2argvtest.c: switch to using a unix monitor * tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
-
由 Mark McLoughlin 提交于
There are no functional changes in this patch apart from adding the monitor type to the state XML. The patch mostly consists of switching to use virDomainChrDef every where to describe the monitor. * src/domain_conf.h: replace monitorpath with monitor_chr * src/domain_conf.c: handle parsing the monitor type and initializing monitor chr * src/qemu_conf.[ch]: make qemudBuildCommandLine take a virDomainChrDefPtr and use that to build the -monitor parameter * src/qemu_driver.c: split pty specific and common code from qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr * tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
-
- 08 7月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga when starting guests if video card is present * tests/qemuhelptest.c: Change to use constants instead of hardcoded hex numbers, and add VGA support * tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml, tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video> element for testing graphics adapter * tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag * tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
-
- 16 6月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
Qemu < 0.10.0 did not support it, and virt-* tools now try to add this by default, so it's extra important we ensure the option exists.
-
- 19 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 16 3月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 2月, 2009 1 次提交
-
-
由 Jim Meyering 提交于
* tests/qemuxml2argvtest.c: Revert the change, "tests: diagnose open failure" of 2009-01-30. * tests/testutils.c (virtTestLoadFile): Diagnose failure here.
-
- 31 1月, 2009 3 次提交
-
-
由 Jim Meyering 提交于
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Diagnose failure to open an input file.
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 30 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 12 1月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html: document the new PCI passthrough format * tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml: and add a regression test for it. Daniel
-
- 18 12月, 2008 1 次提交
-
-
由 Guido Günther 提交于
-
- 11 12月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml: slightly modified patch for SDL fullscreen from Itamar Heim * docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng: update the schemas and docs about the sdl graphic element attributes * AUTHORS: add Itamar Heim Daniel
-
- 04 12月, 2008 1 次提交
-
-
由 Guido Günther 提交于
VIR_DOMAIN_XML_INACTIVE flag.
-
- 05 11月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 10月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 8月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Adjust the code that creates "actual" output, so that it too produces a newline-terminated buffer. * tests/qemuxml2argvdata/*.args: Append a newline to each, via: for i in $(find|grep '\.args$'); do echo >> $i;done
-
- 08 8月, 2008 3 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel Veillard 提交于
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c src/qemu_driver.c: patch from Guido Günther allowing to add disk as USB devices * docs/libvirt.rng: extend the schemas for the new value * tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific test to the regression suite Daniel
-
由 Daniel Veillard 提交于
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c src/qemu_driver.c: Patch from Guido Günther allowing to pass usb devices to qemu/kvm * docs/libvirt.rng: add the new functionality to the grammar * tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples to the regression tests * libvirt.spec.in: fix the licence tag Daniel
-
- 29 7月, 2008 1 次提交
-
-
由 Chris Lalancette 提交于
handling code. In particular, if you had a section of XML like: <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> This used to work with older libvirt, but now fails. This is because we are actually passing the literal string (null) to the qemu command-line, which qemu barfs on. This patch fixes it up by making it blank, which allows qemu to continue on it's merry way. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 12 7月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 7月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 29 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 17 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 16 5月, 2008 4 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 07 5月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
* src/qemu_conf.c src/qemu_conf.h src/xend_internal.c src/xend_internal.h src/xm_internal.c src/xml.c src/xml.h: Patch from Cole Robinson adding sound support for QEmu and Xen * tests/qemuxml2argvtest.c tests/sexpr2xmltest.c tests/xmconfigtest.c tests/xml2sexprtest.c: Associated regression tests Daniel
-
- 30 4月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 26 4月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 4月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Done with these commands: git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,' git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
-