- 17 5月, 2016 2 次提交
-
-
由 Andrea Bolognani 提交于
The only QEMU versions that don't have such capability are <0.11, which we no longer support anyway
-
由 Andrea Bolognani 提交于
The only QEMU versions that don't have such capability are <0.12, which we no longer support anyway. Additionally, this solves the issue of some QEMU binaries being reported as not having such capability just because they lacked the {kvm-}pci-assign QMP object.
-
- 16 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
-name guest= is the explicit parameter for passing a VM name. Using it is required to allow a VM with an '=' in the name https://bugzilla.redhat.com/show_bug.cgi?id=1276485
-
由 Jiri Denemark 提交于
When -cpu host is supported by a QEMU binary, a user can use <cpu mode='host-passthrough'/> in domain XML even when libvirtd failed to find a matching model for the host CPU. Let's make it obvious by advertising <cpuselection/> guest capability whenever -cpu host is supported. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
Requires adding the plumbing for <device><video> The value is <enum name='modelType'> to match the associated domain XML of <video><model type='XXX'/> Wire it up for qemu too
-
由 Cole Robinson 提交于
Requires adding the plumbing for <device><graphics> Wire it up for qemu too
-
- 06 5月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
We will need to use the formatter directly for testing QEMU capabilities code. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 05 5月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
virQEMUCapsNewForBinary unconditionally loads data from cache and probes using both QMP and -help parsing, which is suboptimal when we want to use it in tests. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 04 5月, 2016 1 次提交
-
-
由 John Ferlan 提交于
An iothread for virtio-scsi is a property of the controller. Add a lookup of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse the output. For both, support for the iothread was added in qemu 2.4 while support for virtio-scsi in general was added in qemu 1.4. Modify the various mock capabilities replies (by hand) to reflect the when virtio-scsi was supported and then specifically when the iothread property was added. For versions prior to 1.4, use the no device error return for virtio-scsi. For versions 1.4 to before 2.4, add some data for virtio-scsi-pci even though it isn't complete we're not looking for anything specific there anyway. For 2.4 to 2.6, add a more complete reply. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 03 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
Reports whether we support -device nec-usb-xhci,p3=XXX value, which has been available since qemu 1.3.0
-
由 Ján Tomko 提交于
Use it everywhere except for virQEMUCapsFillDomainFeatureGICCaps.
-
- 02 5月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
If qemu doesn't support DEVICE_TRAY_MOVED event the code that attempts to change media would attempt to re-eject the tray even if it wouldn't be notified when the tray opened. Add a capability bit and skip retrying for old qemus.
-
- 20 4月, 2016 4 次提交
-
-
由 Andrea Bolognani 提交于
Implement support for saving GIC capabilities in the cache and read them back.
-
由 Andrea Bolognani 提交于
Take the GIC capabilities stored in a virQEMUCaps instance and update a virDomainCaps instance appropriately.
-
由 Andrea Bolognani 提交于
QEMU introduced the query-gic-capabilities QMP command with commit 4468d4e0f383: use the command, if available, to probe available GIC capabilities. The information obtained is stored in a virQEMUCaps instance, and will be later used to fill in a virDomainCaps instance.
-
由 Andrea Bolognani 提交于
The struct contains a single boolean field, 'supported': the meaning of this field is too generic to be limited to devices only, and in fact it's already being used for other things like loaders and OSs. Instead of trying to come up with a more generic name just get rid of the struct altogether.
-
- 15 4月, 2016 3 次提交
-
-
由 Peter Krempa 提交于
The flag is now unused and all qemus supported by libvirt already support it.
-
由 Laine Stump 提交于
The pxb device is a PCIe expander bus that can be added to any Q35-based machinetype. A single PCIe port (*not* hotpluggable) is provided; if more than one device is desired, or if hotplug support is needed, either a pcie-root-port, or some combination of pcie-switch-upstream-port and pcie-swith-downstream-ports must be added to it. It can have a NUMA node number associated with it, as well as a bus number.
-
由 Laine Stump 提交于
The pxb device is a PCI expander bus that can be added to any 440fx-based machinetype. The PCI bus that is created has 32 standard PCI slots (hotpluggable). It can have a NUMA node number associated with it, as well as a bus number.
-
- 08 4月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
Some places already check for "virt-" prefix as well as plain "virt". virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices having assigned the same unnumbered "pci" alias. Add a test for the "virt-2.6" machine type which also omits the <model type='virtio'/> in <interface>, to check if qemuDomainDefaultNetModel works too. https://bugzilla.redhat.com/show_bug.cgi?id=1325085
-
- 07 4月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add a capability bit for the qemu secret object. Adjust the 2.6.0-1 caps/replies to add the secret object. For the .replies it's take from the '{"execute":"qom-list-types"}' output.
-
- 25 3月, 2016 1 次提交
-
-
由 Jovanka Gulicoska 提交于
These uses of virGetLastError message are just duplicating virGetLastErrorMessage.
-
- 12 3月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the serial device options to the command line removing that task from the mainline qemuBuildCommandLine. Using const virDomainDef causes collateral damage in other called APIs which need to make the similar adjustment Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 11 3月, 2016 1 次提交
-
-
由 Marc-André Lureau 提交于
QEMU (somewhere around 2.0) added a new sub-option to the -name flag -name debug-threads=on. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Honour the <log file='...'/> element in chardevs to output data to a file. This requires QEMU >= 2.6 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 01 3月, 2016 2 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Marc-André Lureau 提交于
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to enable opengl rendering context (patches on the ML). This is necessary to actually enable virgl rendering. Add a qemuxml2argv test for virtio-gpu + spice with virgl. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 2月, 2016 2 次提交
-
-
由 Martin Kletzander 提交于
Checking whether x > 0 before looping over [0..x] items doesn't make sense and multi-line body must have curly brackets around it. Best viewed with '-w'. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Paolo Bonzini 提交于
This does nothing more than adding the new device and capability. The device is present since QEMU 2.6.0. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 12 1月, 2016 2 次提交
-
-
由 Dmitry Andreev 提交于
Add appropriate capability check and new virQEMUCaps flag for the new virtio balloon feature. QEMU commit with the complete feature description: http://git.qemu.org/?p=qemu.git;a=commit;h=e3816255bf4b6377bb405331e2ee0dc14d841b80
-
由 Michal Privoznik 提交于
This capability tells if qemu is capable of vserport_change events. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 1月, 2016 3 次提交
-
-
由 Cole Robinson 提交于
Update test data to match
-
由 Cole Robinson 提交于
These settings are specific to PIIX, so clarify it
-
由 Cole Robinson 提交于
The chipset is called PIIX; the functions are misnamed
-
- 24 12月, 2015 1 次提交
-
-
由 Dmitry Mishin 提交于
By default, QEMU truncates serial file on open. Sometimes, it could be weird - for example, when we are trying to investigate some event, which occured several restarts ago. This patch adds an ability to preserve previous content. Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>
-
- 30 11月, 2015 2 次提交
-
-
由 Ján Tomko 提交于
Add QEMU_CAPS_VIRTIO_INPUT_HOST for both virtio-input-host-device and virtio-input-host-pci.
-
由 Ján Tomko 提交于
Add capabilities for virtio-keyboard, virtio-mouse and virtio-tablet devices: name "virtio-keyboard-device", bus virtio-bus name "virtio-keyboard-pci", bus PCI name "virtio-mouse-device", bus virtio-bus name "virtio-mouse-pci", bus PCI name "virtio-tablet-device", bus virtio-bus name "virtio-tablet-pci", bus PCI Map both -device and -pci versions of the device to one capability. https://bugzilla.redhat.com/show_bug.cgi?id=1231114
-
- 27 11月, 2015 2 次提交
-
-
由 Marc-André Lureau 提交于
Check if virtio-gpu provides virgl option, and add qemu command line formatter. It is enabled with the existing accel3d attribute: <model type='virtio' heads='1'> <acceleration accel3d='yes'/> </model> Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Marc-André Lureau 提交于
qemu 2.5 provides virtio video device. It can be used with -device virtio-vga for primary devices, or -device virtio-gpu for non-vga devices. However, only the primary device (VGA) is supported with this patch. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1195176Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-