Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Listing all CPU models supported by QEMU in domain capabilities makes
little sense when libvirt will refuse any model it doesn't know about.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

cpuGetSubDriver already reports a useful error.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Some CPU drivers (such as arm) do not provide list of CPUs libvirt
supports and just pass any CPU model from domain XML directly to QEMU.
Such driver need to return models == NULL and success from cpuGetModels.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To have a single place where we decide whether a guest can run natively
on a host.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The x86 CPU driver translated each CPU definition from domain XML into
CPUID data and then back to CPU definition. This effectively sorted the
list of CPU features according to their CPUID values. Since this is
going to change, we need to reorder CPU features in a few test files to
make sure the generated QEMU command lines will not change.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Testing PPC64/AArch64 KVM domains on x86_64 host only works because we
have a lot of bugs in our code. Since this series is going to fix them,
we need to make sure the host architecture matches guest for KVM
domains.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemu_command.c should deal with translating our domain definition into a
QEMU command line and nothing else.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Changing a host architecture or a CPU is not as easy as assigning a new
value to the appropriate element in virCaps since there is a relation
between the CPU and host architecture (we don't really want to test
anything on an AArch64 host with core2duo CPU). This patch introduces
qemuTestSetHostArch and qemuTestSetHostCPU helpers which will make sure
the host architecture matches the host CPU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemuCaps->arch should match the guest architecture from domain XML.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Some parts of qemuCaps depend on guest architecture, machine type, and
possibly other things that we know only once the domain XML has been
parsed. Let's move all these updates into a dedicated function.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

testCompareXMLToArgv will soon need to call a few function which are
defined further in the code. Let's move them up a bit.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The list of supported CPU models in domain capabilities is stored in
virDomainCapsCPUModels. Let's use the same object for storing CPU models
in QEMU capabilities.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The patch adds <cpu> element to domain capabilities XML:

    <cpu>
        <mode name='host-passthrough' supported='yes'/>
        <mode name='host-model' supported='yes'/>
        <mode name='custom' supported='yes'>
            <model>Broadwell</model>
            <model>Broadwell-noTSX</model>
            ...
        </mode>
    </cpu>

Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Our internal APIs mostly use virArch rather than strings. Switching
cpuGetModels to virArch will save us from unnecessary conversions in the
future.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

By default, virt-manager (and likely other libvirt-based apps) sets
the VIR_MIGRATE_PERSIST_DEST flag when invoking the migrate API, which
fails in a Xen setup since the libxl driver does not support the flag.

Persisting a domain is a trivial task in the grand scheme of migration,
so be nice to libvirt apps and add support for VIR_MIGRATE_PERSIST_DEST
in the libxl driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We have a few of senarios that libvirtd would invoke qemuProcessStop
and leave a "shutting down" in /var/log/libvirt/qemu/$DOMAIN.log.

The shutoff reason showing in debug log is also very important
for us to know why VM shutting down in domain log,
as we seldom enable debug log of libvirtd.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1322717

During offline migration, no storage is copied. Nor disks, nor
NVRAM file, nor anything. We use qemu for that and because domain
is not running there's nobody to copy that for us.
We should document this to avoid confusing users.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Calling virDomainGetEmulatorPinInfo on a live VM with automatic NUMA
pinning and VIR_DOMAIN_AFFECT_CONFIG would return the automatic pinning
data in some cases which is bogus. Use the autoCpuset property only when
called on a live definition.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1365779

Calling virDomainGetVcpuPinInfo on a live VM with automatic NUMA pinning
and VIR_DOMAIN_AFFECT_CONFIG would return the automatic pinning data
in some cases which is bogus. Use the autoCpuset property only when
called on a live definition.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1365779

Sometimes adding a separate variable to access vm->privateData is not
necessary. Add a macro that will do the typecasting rather than having
to add a temp variable to force the compiler to typecast it.

Return whether the live or persistent definition was returned. Sometimes
it's necessary to base the decisions on this.

Old libvirt represents

    <graphics type='spice'>
      <listen type='none'/>
    </graphics>

as

    <graphics type='spice' autoport='no'/>

In this mode, QEMU doesn't listen for SPICE connection anywhere and
clients have to use virDomainOpenGraphics* APIs to attach to the domain.
That is, the client has to run on the same host where the domains runs
and it's impossible to tell the client to reconnect to the destination
QEMU during migration (unless there is some kind of proxy on the host).

While current libvirt correctly ignores such graphics devices when
creating graphics migration cookie, old libvirt just sends

    <graphics type='spice' port='0' listen='0.0.0.0' tlsPort='-1'/>

in the cookie. After seeing this cookie, we happily would call
client_migrate_info QMP command and wait for SPICE_MIGRATE_COMPLETED
event, which is quite pointless since the doesn't know where to connecti
anyway. We should just ignore such cookies.

https://bugzilla.redhat.com/show_bug.cgi?id=1376083Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Checking if a domain's definition or if it is active before we got a job
is pointless since the domain might have changed in the meantime.

Luckily libvirtd didn't crash when the API tried to talk to an inactive
domain:

debug : qemuDomainObjBeginJobInternal:2914 : Started job: modify
    (async=none vm=0x7f8f340140c0 name=ble)
debug : qemuDomainObjEnterMonitorInternal:3137 : Entering monitor
    (mon=(nil) vm=0x7f8f340140c0 name=ble)
warning : virObjectLock:319 : Object (nil) ((unknown)) is not a
    virObjectLockable instance
debug : qemuMonitorOpenGraphics:3505 : protocol=spice fd=27
    fdname=graphicsfd skipauth=1
error : qemuMonitorOpenGraphics:3508 : invalid argument: monitor must
    not be NULL
debug : qemuDomainObjExitMonitorInternal:3160 : Exited monitor
    (mon=(nil) vm=0x7f8f340140c0 name=ble)
debug : qemuDomainObjEndJob:3068 : Stopping job: modify (async=none
    vm=0x7f8f340140c0 name=ble)
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>