Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Stream server error is not propagated if thread does not have the buck.
In case we have the buck we are ok due to the code added in [1].

Let's check for stream error on all paths. Now we don't need
to raise error in virNetClientCallDispatchStream.

Old code reported error only if the first message in wait
queue awaits reply. It is odd as depends on wait queue
situation. For example if we have only TX
message in queue and in one iteration loop both send the
message and receive error then thread sending TX message did
not receive the error. Next if we have RX message (first)
and TX message (second) in queue and in one iteration
loop both send the TX message and receive error then
thread sending TX message received error. In short
it was inconsistent. Let's report error whenever
we received it and for every type of message as it makes
sense to report errors as early as possible.

[1] 16c6e2b4: Fix propagation of RPC errors from streams
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In next patches we'll add stream state checks to this
function that applicable to all call paths. This is handy
place because we hold client lock here.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Stream abort/finish can hang because we can receive abort message
from server and yet sent abort/finish message to server. The latter
will not be answered ever because after server sends abort message
it forgets the stream and messages for unknown stream are simply ignored.

We check for stream error at the very beginning of remoteStreamFinish/remoteStreamAbort
but stream error can be set after the check in another thread operating
on stream. Let's check for stream error under client lock similar
to what's done in [1].

[1] 833b901c: stream: Check for stream EOF
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

These functions do mostly the same things, and it would be
preferrable if they did them in mostly the same ways. This
also fixes a few violations to our code style guidelines.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The function operates on a virDomainDef and is not tied to
device address assignment in any way, so it makes more sense
for it to live along with qemuDomainIs*() and the like.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Ideally we'd make all of them static, but there are a few
cases where we don't have a virDomainDef instance handy and
so they are the only option.

For the few ones we're forced to keep exporting, document
through comments that the alternative is preferred.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Now that we have added architecture checks to all
qemuDomainIs*() functions, we no longer need to perform the
same checks separately.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

There is very little overlap in the machine types available
on different architectures, so broadly speaking checking the
machine type is usually enough; regardless, it's better to
check the architecture as well.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

We want the signatures to be consistent, and also we're
going to start using the additional parameter next.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Make sure related functions, eg. all qemuDomainIs*(), are
close together instead of being sprinkled throughout both
the header and implementation file, and also that all
qemuDomainMachine*() functions are declared first since
we're going to make a bunch of them static later on.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

While the chances of the current checks resulting in false
positives are basically zero, it's still nicer to check for
the full prefix instead of the prefix's prefix.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

No need to check whether we're dealing with a pSeries guest
twice within just a few lines.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

For consistency, let's use the semicolon for all definitions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Luckily, the new URL still points to the same location, the only change
is in the document name where an escaped space (%20) was replaced by an
underscore.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Avoid calling the command and fix test fallout.

https://bugzilla.redhat.com/show_bug.cgi?id=1673320Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

QEMU plans to deprecate 'query-events' as it's non-extensible. Events
are also described by 'query-qmp-schema' so we can use that one instead.

This patch adds detection of events to
virQEMUCapsProbeQMPSchemaCapabilities using the same structure declaring
them for the old approach (virQEMUCapsEvents). This is possible as the
name is the same in the QMP schema and our detector supports that
trivially.

For any complex queries virQEMUCapsQMPSchemaQueries can be used in the
future.

For now we still call 'query-events' and discard the result so that it's
obvious that the tests pass. This will be cleaned up later.

https://bugzilla.redhat.com/show_bug.cgi?id=1673320Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The event was added by qemu commit 6f382ed226f3 released in v1.1.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

DEVICE_DELETED was added in qemu commit 0402a5d65ec00 which was released
in v1.5.0.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

DO_TEST_ATTACH and DO_TEST_ATTACH_EVENT now do the same thing so we can
remove the latter including the infrastructure.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Currently all supported qemu versions now have support for the
DEVICE_DELETED event. This means that testing the old approach is a
waste of time.

Always add the QEMU_CAPS_DEVICE_DEL_EVENT capability in the hotplug test
and fix existing test cases.

The 'disk-virtio', 'disk-usb', 'disk-scsi', and 'disk-scsi-2' already
had variants that used the event, so the non-event variants will be
removed.

For all other cases the QMP_DEVICE_DELETED macro is used to add the
correct reply.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This variant is unused as we create the object including capabilities
with DO_TEST_ATTACH_EVENT, which is then reused.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The event was added by qemu commit 2fdd16e239c2a2 released in v1.3.0.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Remove the uneeded attribute and return value.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The event was added to qemu by commit 973603a813c5d60 which is contained
in the 1.2.0 release.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Avoid regressions by disallowing the BLOCKDEV capability.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

QEMU accidentally exposed the id of -drive (or same value as disk
serial, if provided) in one of the identifiers visible from the guest.

To avoid regression in case when -blockdev will be used we need to
always specify it ourselves.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).

QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Based on qemu commit 'v3.1.0-1445-ga61faa3d02'. Will allow checking
for the scsi 'device_id' property.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

For SCSI, IDE, and AHCI cdroms the appropriate device types which select
the correct media are used. In qemu there's one other code path that
looks at -drive media=cdrom in the XEN pv code. Thankfully we don't
support it with qemu (see qemuBuildDiskDeviceStr). All other devices
ignore it as the comment states, thus we can drop that code.

The test fallout is expectedly only in the test added for uncommon cdrom
types.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty

Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable

Forbid configurations where users would attempt to use cdroms in virtio
bus.

Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Cast disk->bus to proper type and add missing values to the enum so it's
more obvious what types are supported.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.

Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.

All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

It's a subset of 'iothreads-virtio-scsi-ccw'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Use DO_TEST_CAPS_LATEST to obtain modern results.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Rather than testing random set of flags add a case also for the oldest
supported qemu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>