As same as normal directories, a cgroup cannot be removed if it
contains sub groups. This patch changes virCgroupRemove to remove
all descendant groups (subdirectories) of a target group before
removing the target group.

The handling is required when we run lxc with ns subsystem of cgroup.
Ns subsystem automatically creates child cgroups on every process
forks, but unfortunately the groups are not removed on process exits,
so we have to remove them by ourselves.

With this patch, such child (and descendant) groups are surely removed
at lxc shutdown, i.e., lxcVmCleanup which calls virCgroupRemove.

If there is no driver for a URI we report

  "no hypervisor driver available"

This is bad because not all virt drivers are hypervisors (ie container
based virt).

If there is no driver support for an API we report

  "this function is not supported by the hypervisor"

This is bad for the same reason, and additionally because it is
also used for the network, interface & storage drivers.

* src/util/virterror.c: Improve error messages

If VM startup fails early enough (can't find a referenced USB device),
libvirtd will crash trying to clear the VNC port bit, since port = 0,
which overflows us out of the bitmap bounds.

Fix this by being more defensive in the bitmap operations, and only
clearing a previously set VNC port.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This patch works around a recent extension of the netlink driver I had made use of when building the netlink messages. Unfortunately older kernels don't accept IFLA_IFNAME + name of interface as a replacement for the interface's index, so this patch now gets the interface index ifindex if it's not provided (ifindex <= 0).

Otherwise this will segfault if PATH is not defined.

Reported by Emre Erenoglu

* src/util/threads.c (includes) [WIN32]: On mingw, favor native
threading over pthreads-win32 library.
* src/util/thread.h [WIN32] Likewise.
Suggested by Daniel P. Berrange.

A look at the QEMU source revealed the missing bits of info about
the VPC file format, so we can enable this now

* src/util/storage_file.c: Enable VPC format, providing version
  and disk size offset fields

This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.

The following changes were made during the development of this patch:

 - Merging Scott's v13-pre1 patch
 - Fixing endptr related bug while using virStrToLong_ui() pointed out
   by Jim Meyering
 - Addressing Jim Meyering's comments to v11
 - requiring mac address to the vpDisassociateProfileId() function to
   pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
 - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
   (hardcode as is hardcode alson in lldpad sources)
 - merging netlink send code for kernel target and user space target
   (lldpad) using one function nlComm() to send the messages
 - adding a select() after the sending and before the reading of the
   netlink response in case lldpad doesn't respond and so we don't hang
 - when reading the port status, in case of 802.1Qbg, no status may be
   received while things are 'in progress' and only at the end a status
   will be there.
 - when reading the port status, use the given instanceId and vf to pick
   the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
 - never sending nor parsing IFLA_PORT_SELF type of messages in the
   802.1Qbg case
 - iterating over the elements in a IFLA_VF_PORTS to pick the right
   IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
   (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
   and reading the current status in IFLA_PORT_RESPONSE.
 - recycling a previous patch that adds functionality to interface.c to
   - get the vlan identifier on an interface
   - get the flags of an interface and some convenience function to
     check whether an interface is 'up' or not (not currently used here)
 - adding function to determine the root physical interface of an
   interface. For example if a macvtap is linked to eth0.100, it will
   find eth0. Also adding a function that finds the vlan on the 'way to
   the root physical interface'
 - conveying the root physical interface name and index in case of 802.1Qbg
 - conveying mac address of macvlan device and vlan identifier in
   IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
   to (future) lldpad via netlink
  - To enable build with --without-macvtap rename the
    [dis|]associatePortProfileId functions, prepend 'vp' before their
    name and make them non-static functions.
  - Renaming variable multicast to nltarget_kernel and inverting
    the logic
  - Addressing Jim Meyering's comments; this also touches existing
    code for example for correcting indentation of break statements or
    simplification of switch statements.
  - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
  - 802.1Qbg part prepared for sending a RTM_SETLINK and getting
    processing status back plus a subsequent RTM_GETLINK to
    get IFLA_PORT_RESPONSE.
    Note: This interface for 802.1Qbg may still change
  - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
    warning when latest if_link.h isn't available
  - move from Stefan's 802.1Qb{g|h} XML v8 to v9
  - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
  - remove debug fprintfs
  - use virGetHostUUID (thanks Stefan!)
  - fix compile issue when latest if_link.h isn't available
  - change poll timeout to 10s, at 1/8 intervals
     - if polling times out, log msg and return -ETIMEDOUT
  - Add Stefan's code for getPortProfileStatus
  - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
     - if status indicates error, abort openMacvtapTap
     - if status indicates success, exit polling
     - if status is "in-progress" after 2 secs of polling, exit
       polling loop silently, without error

My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC.  I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML.  VM-to-VM,
and VM-to-external work as expected.  VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts.  I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour.  For example, adjusting a QoS setting like rate limit.  All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.

I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index.  We'll need to complete this by discovering the PF given the VF
linkdev.  Once we have the PF, we'll also have the VF index.  All this info-
mation is available from sysfs.

* src/util/bitmap.c (virBitmapAlloc): Tighten sanity check.

Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=598272

Some files under /sys/bus/usb/devices/ have the format 'usbX', where
X is the USB bus number. Use STRPREFIX to correctly parse the bus numbers.

* src/util/hooks.c (virHookLxcOp): Use correct bound.

We've been running into a lot of situations where
virGetHostname() is returning "localhost", where a plain
gethostname() would have returned the correct thing.  This
is because virGetHostname() is *always* trying to canonicalize
the name returned from gethostname(), even when it doesn't
have to.

This patch changes virGetHostname so that if the value returned
from gethostname() is already FQDN or localhost, it returns
that string directly.  If the value returned from gethostname()
is a shortened hostname, then we try to canonicalize it.  If
that succeeds, we returned the canonicalized hostname.  If
that fails, and/or returns "localhost", then we just return
the original string we got from gethostname() and hope for
the best.

Note that after this patch it is up to clients to check whether
"localhost" is an allowed return value.  The only place
where it's currently not is in qemu migration.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/util/macvtap.c: (associatePortProfileId)
(disassociatePortProfileId): Move inside HAVE_MACVTAP
conditional.
Reported by Eduardo Otubo.

This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)

Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:

https://bugzilla.redhat.com/show_bug.cgi?id=494005
https://bugzilla.redhat.com/show_bug.cgi?id=593565

Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.

v2: Leading // must be preserved, properly sanitize path=/, sanitize
    away /./ -> /

v3: Properly handle starting ./ and ending /.

v4: Drop all '.' handling, just sanitize / for now.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

* src/util/bitmap.h (includes): Placate cppi.

V2:
  - Move bitmap impl to src/util/bitmap.[ch]
  - Use CHAR_BIT instead of explicit '8'
  - Use size_t instead of unsigned int
  - Fix calculation of bitmap size in virBitmapAlloc
  - Ensure bit is within range of map in the set, clear, and get
    operations
  - Use bool in virBitmapGetBit
  - Add virBitmapFree to free-like funcs in cfg.mk

V3:
  - Check for overflow in virBitmapAlloc
  - Fix copy and paste bug in virBitmapAlloc
  - Use size_t in prototypes
  - Add ATTRIBUTE_NONNULL in prototypes where appropriate
    and remove NULL check from impl

V4:
  - Add ATTRIBUTE_RETURN_CHECK in prototypes where appropriate.

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

Run this:
  git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'

Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer.  Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.

* src/util/uuid.c (virUUIDGenerate): Remove _(...) manually.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

* src/util/ebtables.c (ebtablesAddRemoveRule): Don't skip
va_end(args) on an error path.
* src/util/iptables.c (iptablesAddRemoveRule): Identical change.

* cfg.mk (useless_free_options): Add many vir*Free* function names,
and then remove the useless if-before-free tests exposed by running
make syntax-check.
* src/conf/interface_conf.c (virInterfaceDefFree): Remove useless "if".
(virInterfaceAssignDef): Likewise.
* src/conf/network_conf.c (virNetworkAssignDef): Likewise.
* src/conf/storage_conf.c (virStoragePoolObjAssignDef): Likewise.
* src/node_device/node_device_hal.c (dev_create): Likewise.
* src/security/virt-aa-helper.c (vahDeinit): Likewise.
* src/test/test_driver.c (testNodeDeviceCreateXML): Likewise.
* src/util/conf.c (virConfSetValue): Likewise.

virFileResolveLink was returning a positive value on error,
thus confusing callers that assumed failure was < 0.  The
confusion is further evidenced by callers that would have
ended up calling virReportSystemError with a negative value
instead of a valid errno.

Fixes Red Hat BZ #591363.

* src/util/util.c (virFileResolveLink): Live up to documentation.
* src/qemu/qemu_security_dac.c
(qemuSecurityDACRestoreSecurityFileLabel): Adjust callers.
* src/security/security_selinux.c
(SELinuxRestoreSecurityFileLabel): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.

v2: Use intended F_OK. Drop devdir param, just check dev->path for device
existence.

v3: Use virReportSystemError, include dev->path in error message.

* configure.ac: Check for <linux/magic.h>.
* src/util/storage_file.c: Include <linux/magic.h> only if present.
Linux kernels prior to 2.6.19 lacked it.
[__linux__] (NFS_SUPER_MAGIC): Define if not already defined.

When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem

* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
  method virStorageFileIsSharedFS() to determine if a file is
  on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
  disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
  src/security/security_selinux.c, src/security/security_driver.h,
  src/security/security_apparmor.c: Add ability to skip disk
  restore step for files on shared filesystems.

* src/util/macvtap.c (delMacvtap): Fix documentation.

81 patches to gnulib, picks up several new syntax checks.

* .gnulib: Update to latest.
* .x-sc_prohibit_always_true_header_tests: New file.
* bootstrap.conf (gnulib_modules): Add sched.
* src/util/processinfo.c (includes): <sched.h> is now guaranteed.
* src/network/bridge_driver.c (includes): Drop useless
<strings.h>.
* src/openvz/openvz_conf.c (includes): Likewise.
* src/openvz/openvz_driver.c (includes): Likewise.
* src/phyp/phyp_driver.c (includes): Likewise.
* src/qemu/qemu_driver.c (includes): Likewise.
* src/uml/uml_driver.c (includes): Likewise.

* configure.ac: Drop sys/wait.h check.
* src/libvirt.c (includes): Use header unconditionally.
* src/remote/remote_driver.c (includes): Likewise.
* src/storage/storage_backend.c (includes): Likewise.
* src/util/ebtables.c (includes): Likewise.
* src/util/hooks.c (includes): Likewise.
* src/util/iptables.c (includes): Likewise.
* src/util/util.c (includes): Likewise.

Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions.  Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.

* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks.  Optimize function
checks.  Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.

Detected by clang.  POSIX requires that the second argument to
va_start be the name of the last variable; and in some implementations,
passing *path instead of path would dereference bogus memory instead
of pulling arguments off the stack.

* src/util/util.c (virBuildPathInternal): Use correct argument to
va_start.

Add an empty body for virCondWaitUntil and move virPipeReadUntilEOF
out of the '#ifndef WIN32' block, because it compiles fine with MinGW
in combination with gnulib.

Necessary on cygwin, where uid_t and gid_t are 4-byte long rather
than int, causing gcc -Wformat warnings.

* src/util/util.c (virFileOperationNoFork, virDirCreateNoFork)
(virFileOperation, virDirCreate, virGetUserEnt): Cast uid_t and
gid_t before passing to printf.
* .gitignore: Ignore Windows executables.

* src/util/cgroup.c: free temporal path string before breaking loop

* src/util/dnsmasq.c (dnsmasqReload): Mingw lacks kill, but is not
running a dnsmasq daemon either.

Also do some indentation clean up.